Caterpillar Flash Files List & Cross

Available flash (flashfiles) for Caterpillar ECU/ECM components – PEEC, ADEM I, II, III, IV, Acert Tecnology

To correctly view the page do not use more than 100% characters zoom.

=======================================================================
Small Track Type Tractors

Hystat Power Train – ECM Flash Files

The following is a list of serial numbers that are not available on the
“Flash Software Download” web site. If you need software for one
of the stated machines use the “Enter Serial Number” to obtain the
latest software.
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Sales Serial Enter following
Model No. Range Serial Number to obtain
latest ECM flash file for
the stated range
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
D3G XL CFC 1 – 331 CFC00332
D3G LGP CFF 1 – 343 CFF00344
D4G XL CFN 1 – 386 CFN00387
D4G LGP FDC 1 – 291 FDC00292
D5G XL FDH 1 – 803 FDH00804
D5G LGP FDW 1- 467 FDW00468
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Note: In the configuration screen, it is necessary to make sure the
“Product ID” is set to the machine serial number. In addition, it is
NOT mandatory to re-calibrate the hand and pedal controls, or
pumps & motors after flashing new software.
=======================================================================

Current production Flash files for the four Electronic Control Modules (ECMs)
used on the Challenger 35,45, and 55 are available by downloading the files
from
the Caterpillar Mailbox or SIS. All of the earlier production tractor elec-
tronic control modules ›(EDC) Electronic Draft Control module, (EMC)
Electronic Monitoring Center module, (ETC) Electronic Transmission Control
module, (RHC) Right Hand Controls module| can be flashed with the later
software versions. All electronic control modules on a tractor should be up-
dated each time a particular module is flashed in order to take advantage
of the added features and improvements.

NOTE!!!

Service personnel should enter Mode 9 in the Electronic Monitoring Center
to review current software version levels, Mode 10 to review current
transmission clutch calibrations, and Mode 12 to review current tractor
features. Service personnel should make a note of each item reviewed.

If Fault Code F205 (Features do not agree) appears after Flash downloading,
it will be necessary to reconfigure the tractor in Mode 12.

WARNING!!!

Since the flash process erases the software file from the electronic control
module before programming it, a failure while flashing the module will
render that module inoperable (cannot communicate with Controller Area
Network); and depending on which module is being flashed, the tractor
may be inoperable. Once this occurs, there are two options: 1) if failure
was due to a loss of communications (cable was pulled loose or battery
went dead), reestablish communications with the module and re-flash.
Or 2) if failure was due to a corrupt Flash file, flash the electronic control
module with any earlier software version.

FLASH RELEASE
DESCRIPTION/PREFIX ECM FILE DATE
—————————————————————
Challenger 35 EDC EDC0640.bin Nov 00
(8DN,8RD,ADK) EMC EMC0680.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

Challenger 45 EDC EDC0640.bin Nov 00
(1DR,ABF,3BK) EMC EMC0680.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

Challenger 55 EDC EDC0640.bin Nov 00
(7DM,AEN,6NN) EMC EMC0680.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

FLASH RELEASE
DESCRIPTION/PREFIX ECM FILE DATE
—————————————————————
CLAAS
Challenger 35 EDC EDC0640.bin Nov 00
(9DF,3HS,1TJ) EMC EMC0679.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

CLAAS
Challenger 45 EDC EDC0640.bin Nov 00
(4DZ,4KW,4YL) EMC EMC0679.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

CLAAS
Challenger 55 EDC EDC0640.bin Nov 00
(5DK,7TZ,3SM) EMC EMC0679.bin Nov 99
ETC ETC0590.bin Nov 00
RHC RHC0330.bin Nov 99

================================================================================
Challenger 35/45/55 FLASH File Cross Reference
Challenger 35/45/55 FLASH FILE CROSS REFERENCE
UPDATED 13 March 1997

Current production Flash files for the four Electronic Control Modules
(ECMs) used on the Challenger 35,45, and 55 are available by downloading
the files from the Caterpillar Mailbox. All of the earlier production
tractor electronic control modules (EDC) Electronic Draft Control module,
(EMC) Electronic Monitoring Center module, (ETC) Electronic Transmission
Control module, (RHC) Right Hand Controls moduleÙ can be flashed with the
later software versions. Individual control modules may be updated.
However, to take advantage of the added features and improvements; it is
recommended that all control modules be downloaded with the latest Flash
files when updating a tractor.

NOTE!!!

If Fault Code F205 (Features do not agree) appears after Flash downloading,
it will be necessary to reconfigure the tractor in Mode 12.

WARNING!!!

Since the flash process erases the software file from the electronic
control module before programming it, a failure while flashing the module
will render that module inoperable (cannot communicate with Controller Area
Network); and depending on which module is being flashed, the tractor may
be inoperable. Once this occurs, there are two options: 1) if failure was
due to a loss of communications (cable was pulled loose or battery went
dead), reestablish communications with the module and re-flash. Or 2) if
failure was due to a corrupt Flash file, flash the electronic control
module with pre-DEC 95 software version.

Changes made to EDC software 06.00

When in draft mode, the draft function range of the quadrant lever has been
expanded to approximately half the normal working range. Previously, the
draft function range of the quadrant lever was only about one inch.

EDC06.00 software is effective with Challenger 35 (8DN0620-Up), Challenger
45(1DR1374-Up), and Challenger 55 (7DM0624-Up).

DESCRIPTION S/N FLASH RELEASE
RANGE CCM FILE DATE
———————————————————————
Challenger 35 8DN1 – UP EDC EDC0600.bin Mar 97
EMC EMC0637.bin DEC 95
ETC ETC0519.bin DEC 95
RHC RHC0307.bin May 95

Challenger 45 1DR1 – UP EDC EDC0600.bin Mar 97
EMC EMC0637.bin DEC 95
ETC ETC0519.bin DEC 95
RHC RHC0307.bin May 95

Challenger 55 7DM1 – UP EDC EDC0600.bin Mar 97
EMC EMC0637.bin DEC 95
ETC ETC0519.bin DEC 95
RHC RHC0307.bin May 95

================================================================================
3500 With EUI Option Commercial Engine FLASH File Cross-Reference
Updated 05/24/01

EPG MARINE AUX MARINE PROPULSION
5XM1-Up 3TS1-Up 3PS1-Up
3LS1-Up 3WS1-Up 3RS1-Up
6PM1-Up 3XS1-Up 3SS1-Up
3MS1-Up
7KM1-Up
3NS1-Up

****************************************************************
Notes for Using This Document
****************************************************************

Part numbers listed under the “Flash Part No.” column are
flash file numbers. These are software numbers that can be
downloaded from the Caterpillar mailbox or copied from the SIS
Flash Files CD. These numbers can not be ordered from the parts
distribution system. Flash files must be used when updating
software electronically using Winflash.

A part number listed under the “Service Replacement” column is
the part number of the removable chip inside the ECM that contains
the flash file software listed in the same row in the table.
These “chips” are made available for a very small percentage of
service locations that do not have flash capability. These parts
must be ordered from the parts distribution system and physically
installed in the ECM using the access cover. Most dealers
will never order chips from the service replacement column. The
flash method of updating software described in the paragraph
above is the preferred method.

****************************************************************
Reasons for software change:
****************************************************************

1. Fix to correct Premium EIP problem with Aftercooler temperature
gage sealing.
2. Several problems are fixed with this update.
(Removed in reason code 4)
A) Fix for Engine Protection Override Switch (EPOS) problem.
Some versions of software do not recognize the (EPOS) and will
not allow an engine triggered shutdown to be overridden. See
service letter PI1395.
B) Fix for the General Alarm Relay (GAR). Some versions of
previous software did not operate the GAR as designed. This
relay is used by some installations to relay certain
monitoring system events to the vessel control system.
C) Fix for intermittent EMSII “!Stop” light flashing. See 15
July 1998 TIB entitled “Intermittent Engine Monitoring System
(EMS) “!Stop” Light Flashing On Marine Propulsion Engines.”
D) Fix for Engine Vision Display Error. A negative crankcase
pressure value would cause Engine Vision to display “Error”.
The new software eliminates this problem.
3. Fix for erroneous logging of high crankcase pressure
events. New software has improved software filtering of
crankcase pressure sensor raw data to stabilize readings
and eliminate false event logging.
(Removed in reason code 4)
4. The software released with reason codes 2 & 3 may have
a 101-13 crankcase pressure calibration required diagnositc.
The diagnostic can be cleared by performing a manual calibration,
but it often returns when power to the ECM is cycled. It was
necessary to release software that had a vaild fix for the EPOS
problem described in reason code 2A above, but the resulting
software with an active 101-13 was not acceptable. Therefore
this new software with reason code 4 was released. It contains
fixes for the EPOS & GAR problems (reason codes 2 A & B).
The remaining fixes for reason codes 2 C, D, and 3 were taken
out of this new software to avoid the 101-13 problem. PI1395
was revised April 1999 as a result of this issue. The fixes that
were removed will be put back into the next software update.
5. A change was made to the 94-02 and 289-02 fuel pressure
sensor misinstalled diagnostic strategies to reduce false
logging. The diagnostics will no longer activate below 200
RPM. Electronic filtering was also added to the software for
the fuel pressure signals for more stable readings. A March 17,
1999 TIB will also help to properly identify the filtered and
unfiltered fuel pressure sensor ports.
6. Solutions for Reason Codes 2 C & D and 3 that were
removed in Reason Code 4 have been corrected and added back
to the software. The false logging of 101-13 has been
eliminated.
7. Solution to EMSII 248-02 code and light flashing issue
mentioned in Jan 28, 1998 TIB. This issue only affects Marine
Propulsion applications equipped with Pilothouse panels.
8. Improved inlet air restriction and oil pressure monitoring.
This should help to reduce false high inlet air restriction
warnings.
9. Software added dedicated low idle switch input (J1-P26)to ECM.
Earlier EPG engines with switchgear conversion panels (Electronic
Instrument Panels) would activate a 91-08 Speed Control Output
Signal Is Abnormal diagnostic when the low idle switch was
activated. The diagnostic became active because the switch was
wired in-line with the PWM speed control signal. When a 91-08
diagnostic is active the ECM defaults to low idle so the switch
has the intended effect. However, the active diagnostic created
problems with certain electronic monitoring systems. The new
dedicated low idle switch ECM input allows the switch to request
low idle speed without opening the speed control signal and
activating the 91-08 diagnostic. This feature can be utilized
on all previous 3500B EPG engines by rewiring the low idle switch.
The engine uses the speed control signal to determine desired
speed when ECM J1-P26 is open. Low idle becomes the desired
speed when J1-P26 is grounded. If the switch wiring is not
changed on EPG engines when the new software is flashed, the low
idle switch will continue to operate as it always has – activating
the 91-08 diagnostic. However, Marine Auxiliary engines that are
field updated with the new software will need to make a wiring
change. ECM J1-P26 on Marine Aux engines currently has circuit
412-BU connecting it to the Electronic Speed Switch (ESS) pin 12.
This circuit currently serves no function and can be disconnected
by removing the wire from pin 12 of the ESS and tying it back or
installing the low idle switch. IF THIS CHANGE IS NOT MADE, THE
ENGINE WILL REMAIN AT LOW IDLE. Note: The low idle switch input
feature will not eliminate a 91-08 diagnostic code caused by a
Woodward Load Share Module that is powered by the generator potential transformers (PTs). This can be eliminating by upgrading to the new
161-0797 24 VDC WLSM. Refer to Special Instruction REHS0532 and
August 1999 Engine News article entitled “New Governor Control (Load
Share Module) for Generator Set Engines” for details.
10. Speed range adjusted per customer request
11. Improved 94-02 and 289-02 fuel pressure sensor misinstalled diagnostic strategy. The previous change in reason code 5 was only partially successful.
The new strategy increases the amount of negative fuel pressure differential required to log the misinstalled codes from -15 kPa to -70 kPa. In addition, the absolute value of the fuel filter differential pressure is now used for display purposes and event logging. This will allow the ECM to monitor differential pressure even if the sensors are installed backward.
12. The percent load calculation has been changed to more accurately reflect engine load. The new percent load calculation also effects the Load Feedback signal ECM output. Be certain to verify that the new software strategy will not adversely effect vessel control systems that utilize this output before flashing the ECM with the new software.
13. The Low Coolant Temperature warning strategy has been improved. This strategy has been improved to reduce low coolant temperature warnings when the engine is lightly loaded. The strategy now uses engine load as well as coolant temperature to determine if the engine is being over cooled. A new Coolant Warning Engine Load Enable Threshold parameter has been added to support this feature. This parameter label will be used in forthcoming versions of Cat ET. Until then the parameter will show up as Load Warning Set.
14. FLS/FTS power adjustment added. Factory level passwords are required to change FLS and FTS. FLS and FTS may be programmed without passwords once on a new (blank) ECM. This occurs when the tattletale is zero. Cat ET Version 3.2 or later is required to program FLS/FTS.
15. The monitoring system is now disabled when engine speed is zero. It was previously possible for the monitoring system to activate an alarm with no engine speed. This resulted in nuisance alarms in applications where the electrical system is left powered up when the engine is not running.
16. Programmable governor gains added. Engine ECM governor gains may be adjusted if the default gain factors do not provide satisfactory system response characteristics. Default governor gain settings are recommended for almost all applications.
17. Rated Fuel Default to Minimum. When replacing a failed ECM the rated fuel limit parameter will now default to a minimum value. The parameter will need to be programmed after the correct value has been obtained from TMI. Previously, the rated fuel limit parameter defaulted to a maximum value and engine damage could occur if it was not properly programed following an ECM replacement.
18. Altitude derate annunciation supression on EMSII. Altitude derate causes the EMSII “!Stop” light to flash. Many customers knowingly operate in derate mode and the continuous light flashing is a nuisance and may disguise a new diagnostic. For this reason, altitude derate will now cause the EMSII “!Stop” light to flash for 15 seconds. After 15 seconds the light will stop flashing. The derate is still active and can be viewed with Cat ET. Only the annunication of the derate has changed.
19. Minimum oil pressure map for low oil pressure warnings is now 69 kPa at low engine speeds. This value was increased to provide added protection to turbochargers.
20. Torque Limit feature added. Programmable parameter allows engine torque to be limited. Parameter may be programmed to a value between torque at rated speed and peak torque.
21. General alarm relay feature updated. The general alarm relay will now
activate for low fuel level and low coolant level. These two conditions did
not previously activate the general alarm relay.
22. Injector E-Trim feature has been updated. A 1495-02 “Injector Trim Not Prog” diagnostic code will activate if the injector trim calibration codes have not been entered. Previously the injector trim codes defaulted to 1100 (no adjustment) and no diagnostic was present. The 1495-02 diagnostic will activate when updating software on existing engines containing injectors that do not have trim codes. To fix the problem, go the calibration screen in Cat ET and reprogram all of the codes to 1100. If the injectors in the engine DO have trim codes program those trim codes into Cat ET.

*************************************************************************
3508 W/EUI GENSET APPLICATION
*************************************************************************

60 HZ, STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
148-2929 148-2930
176-6154 176-6155 5,6,8,9
latest 209-8284 11-22

*************************************************************************
3512 W/EUI GENSET APPLICATION
*************************************************************************

50 HZ, PRIME +10, LO BSFC
Flash Part No. Service Replacement Reason
144-3632 144-3633
176-6182 176-6183 5,6,8,9
latest 209-8285 11-22

60 HZ, STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
144-3630 144-3631
176-6194 176-6195 5,6,8,9
latest 209-8286 11-22

*************************************************************************
3516 W/EUI GENSET APPLICATION
*************************************************************************

50 HZ, PRIME +10, LO BSFC
Flash Part No. Service Replacement Reason
144-3636 144-3637
176-6046 176-6047 5,6,8,9
latest 209-8287 11-22

60 HZ, PRIME / STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
144-3634 144-3635
180-1732 180-1733 5,6,8,9
latest 209-9729 11-22

1800 RPM, CONTINOUS, (INDUSTRIAL)
Flash Part No. Service Replacement Reason
152-5498 154-5499
176-9733 176-9734 5,6,8,9
latest 209-9730 11-22

1800 RPM, PRIME, (INDUSTRIAL -COAL AUGER)
Flash Part No. Service Replacement Reason
149-6144 149-6145
latest 162-3919 162-3920 10

*************************************************************************
3508 W/EUI MARINE AUXILIARY APPLICATION
*************************************************************************

*************************************************************************
3512 W/EUI MARINE AUXILIARY APPLICATION
*************************************************************************

1800 RPM, PRIME / STANDBY , LO BSFC
Flash Part No. Service Replacement Reason
183-7503 183-7504
latest 209-9731 11-22

*************************************************************************
3516 W/EUI MARINE AUXILIARY APPLICATION
*************************************************************************

1800 RPM, PRIME / STANDBY , LO BSFC, JWAC
Flash Part No. Service Replacement Reason
172-6715 172-6716
184-3096 184-3097 5,6,8,9
latest 209-8283 11-22

*************************************************************************
3508 W/EUI MARINE PROPULSION
*************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
144-3654 144-3656 144-3655 144-3657
155-1741 155-1743 155-1742 151-1744 1
168-2001 168-2003 168-2002 168-2004 2, 3
173-2905 173-2907 173-2906 173-2908 4
176-5936 176-5938 176-5937 176-5939 5-8
latest 209-8281 209-8282 11-22

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
166-6526 166-6528 166-6527 166-6529
176-5948 176-5950 176-5949 176-5951 5-8
latest 209-8279 209-8280 11-22

*************************************************************************
3512 W/EUI MARINE PROPULSION
*************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
144-3658 144-3660 144-3659 144-3661
169-2599 169-2601 169-2600 169-2602 2,3
176-6000 176-6002 176-6001 176-6003 5-8
latest 209-8275 209-8276 11-22

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
169-8626 169-8628 169-8627 169-8629
176-6016 176-6018 176-6017 176-6019 5-8
latest 208-6648 208-6649 11-22

*************************************************************************
3516 W/EUI MARINE PROPULSION
*************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC, 155-0730 TURBO
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
163-0661 163-0663 163-0662 163-0664
168-2237 168-2239 168-2238 168-2240 2, 3
173-2877 173-2879 173-2878 173-2880 4
176-6068 176-6070 176-6069 176-6071 5-8
latest 197-3946 197-3947 11-22

1600 RPM, HEAVY WEIGHT, LO BSFC, 132-3647 TURBO
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
175-5350 175-5352 175-5351 175-5353
184-3090 184-3091
latest 209-8273 209-8274 11-22

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
165-4546 165-4548 165-4547 165-4549
176-6096 176-6098 176-6097 176-6099 5-8
latest 208-6659 208-6660 11-22
================================================================================
3500B Commercial Engine (Built < 4/97) FLASH File Cross-Reference 3/26/2001 This software list services engines built before April 1997 that have 7X-6321 Version 'C' ECM's. Latest software services these Serial Numbers back to first production. If your Serial Number is above the ranges on this list, use the list entitled "3500B Commercial Engine (Built > 4/97) FLASH file Cross-Reference.”

EPG MARINE AUX MARINE PROPULSION
4GM1-211 3DM1-92 2BM1-122
8RM1-199 8EM1-257 7HM1-171
6HN1-155 9AN1-120 7SM1-76
6PN1-284 4TN1-95
6WN1-134 8CN1-143
7RN1-462 8KN1-142

**************************************************************************
Notes for Using This Document
**************************************************************************

Software is listed by application then number of cylinders.
All engines are SCAC (Separate Circuit After Cooled) unless
specified.

* For 3516B 50hz genset engines (continuous/ prime /
prime+10, and standby) use the latest software from the
column where you find your original software that was on
the engine.

**************************************************************************
Reasons for software change:
**************************************************************************

This section details the reasons why a software revision was made.
Match the “Reason” number (listed to the right of a flash file) to
its description below. The reason description is a new feature
addition to this cross-reference and reason descriptions are not
available for older files.

1. Several problems are fixed with this update.
A) Fix for intermittent EMSII “!Stop” light flashing. See 15
July 1998 TIB entitled “Intermittent Engine Monitoring System
(EMS) “!Stop” Light Flashing On Marine Propulsion Engines.”
B) Fix for Engine Vision Display Error. A negative crankcase
pressure value would cause Engine Vision to display “Error”.
The new software eliminates this problem.
C) Fix for erroneous logging of high crankcase pressure
events. New software has improved software filtering of
crankcase pressure sensor raw data to stabilize readings
and eliminate false event logging.
D) A change was made to the 94-02 and 289-02 fuel pressure
sensor misinstalled diagnostic strategies to reduce false
logging. The diagnostics will no longer activate below 200
RPM. Electronic filtering was also added to the software for
the fuel pressure signals for more stable readings. A March 17,
1999 TIB will also help to properly identify the filtered and
unfiltered fuel pressure sensor ports.
E) Solution to EMSII MID 030 248-02 code and light flashing issue
mentioned in Jan 28, 1998 TIB. This issue only affects Marine
Propulsion applications equipped with Pilothouse panels.
F) Improved inlet air restriction and oil pressure monitoring.
This should help to reduce false high inlet air restriction
warnings & derates and stabilize readings.
2. Release to correct unpredictable electrical problems that
affect only the 170-3320 & 170-3321 flash files.
3. Software added dedicated low idle switch input (J1-P26)to ECM.
Earlier EPG engines with switchgear conversion panels (Electronic
Instrument Panels) would activate a 91-08 Speed Control Output
Signal Is Abnormal diagnostic when the low idle switch was
activated. The diagnostic became active because the switch was
wired in-line with the PWM speed control signal. When a 91-08
diagnostic is active the ECM defaults to low idle so the switch
has the intended effect. However, the active diagnostic created
problems with certain electronic monitoring systems. The new
dedicated low idle switch ECM input allows the switch to request
low idle speed without opening the speed control signal and
activating the 91-08 diagnostic. This feature can be utilized
on all previous 3500B EPG engines by rewiring the low idle switch.
The engine uses the speed control signal to determine desired
speed when ECM J1-P26 is open. Low idle becomes the desired
speed when J1-P26 is grounded. If the switch wiring is not
changed on EPG engines when the new software is flashed, the low
idle switch will continue to operate as it always has – activating
the 91-08 diagnostic. However, Marine Auxiliary engines that are
field updated with the new software will need to make a wiring
change. ECM J1-P26 on Marine Aux engines currently has circuit
412-BU connecting it to the Electronic Speed Switch (ESS) pin 12.
This circuit currently serves no function and can be disconnected
by removing the wire from pin 12 of the ESS and tying it back or
installing the low idle switch. IF THIS CHANGE IS NOT MADE, THE
ENGINE WILL REMAIN AT LOW IDLE. Note: The low idle switch input
feature will not eliminate a 91-08 diagnostic code caused by a
Woodward Load Share Module that is powered by the generator potential transformers (PTs). This can be eliminating by upgrading to the new
161-0797 24 VDC WLSM. Refer to Special Instruction REHS0532 and
August 1999 Engine News article entitled “New Governor Control (Load
Share Module) for Generator Set Engines” for details.
4. The Low Coolant Temperature warning strategy has been improved.
This strategy has been improved to reduce low coolant temperature
warnings when the engine is lightly loaded. The strategy now uses
engine load as well as coolant temperature to determine if the engine
is being over-cooled. A new Coolant Warning Engine Load Enable Threshold parameter has been added to support this feature. This parameter label
will be used in forthcoming versions of Cat ET. Until then the
parameter will show up in Cat ET as Load Warning Set.

**************************************************************************
3508B GENSET APPLICATION
**************************************************************************

50 HZ, CONTINUOUS, EMISSIONS
Flash Part No. Service Replacement Reason

50 HZ, CONTINUOUS, LO BSFC
Flash Part No. Service Replacement Reason
135-0184 135-0185
138-1341 138-1342
138-8780 138-8781
183-9242 183-9243 1,3
latest 205-7020 4

60 HZ, CONTINUOUS, EMISSIONS
Flash Part No. Service Replacement Reason
129-6789 129-6790
138-1343 138-1344
183-9244 183-9245 1,3
latest 205-7021 4

60 HZ, CONTINUOUS, LO BSFC
Flash Part No. Service Replacement Reason
129-4178 129-4179
132-8711 132-8712
138-8782 138-8783
183-9246 183-9247 1,3
latest 205-7022 4

50 HZ, PRIME/STANDBY, EMISSIONS
Flash Part No. Service Replacement Reason
128-9515 128-9516
132-8715 132-8716
138-1347 138-1348
138-8784 138-8785
140-2442 140-2443
176-6166 176-6167 1,3
latest 205-7023 4

50 HZ, PRIME/STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
129-4189 128-9512
132-3747 132-3748
138-1349 138-1350
138-8786 138-8787
176-6168 176-6169 1,3
latest 205-7024 4

50 HZ, PRIME/STANDBY, LO BSFC, JWAC
Flash Part No. Service Replacement Reason
135-6821 135-6822
138-1389 138-1390
138-8788 138-8789
183-9248 183-9249 1,3
latest 205-7028 4

60 HZ, PRIME/STANDBY, EMISSIONS
Flash Part No. Service Replacement Reason
130-8000 130-8001
138-1353 138-1354
176-6162 176-6163 1,3
latest 205-7025 4

60 HZ, PRIME/STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
127-9871 127-9872
129-3094 129-3095
132-3745 132-3746
138-1355 138-1356
138-8790 138-8791
176-6170 176-6171 1,3
latest 205-7026 4

60 HZ, PRIME/STANDBY, LO BSFC, JWAC
Flash Part No. Service Replacement Reason
133-6952 133-6953
138-1357 138-1358
176-6174 176-6175 1,3
latest 205-7027 4

**************************************************************************
3512B GENSET APPLICATION
**************************************************************************

60 HZ/ 50HZ, PR, JWAC, DUAL
60HZ Service 50HZ Service
Flash Part No. Replacement Flash Part No. Replacement Reason
141-1830 141-1832 141-1831 141-1833
180-4812 180-4813 180-4814 180-4815 1,3
latest 205-7033 205-7034 4

50 HZ, CNT/PR/SB, EMISSIONS
Flash Part No. Service Replacement Reason
129-4187 128-6991
133-6956 133-6957
138-1359 138-1360
138-8792 138-8793
180-3878 180-3879 1,3
latest 205-7036 4

50 HZ, CNT/PR/SB, LO BSFC
Flash Part No. Service Replacement Reason
130-2603 130-2604
133-4663 133-4664
138-1361 138-1362
170-8482 170-8483 1,3
latest 205-7035 4

50 HZ, CNT/PR/SB, LO BSFC, JWAC
Flash Part No. Service Replacement Reason
140-2448 140-2449
185-1396 185-1397 1,3
latest 205-7032 4

60 HZ, CNT/PR/SB, EMISSIONS
Flash Part No. Service Replacement Reason
129-3089 129-3090
132-3749 132-3750
132-8717 132-8718
138-1363 138-1364
138-8794 138-8795
170-8480 170-8481 1,3
latest 205-7030 4

60 HZ, CNT/PR/SB, LO BSFC
Flash Part No. Service Replacement Reason
129-6779 129-6780
131-5251 131-5252
138-1365 138-1366
138-8796 138-8797
176-6184 176-6185 1,3
latest 205-7031 4

60 HZ, CNT/PR/SB, LO BSFC, JWAC
Flash Part No. Service Replacement Reason
135-6825 135-6826
138-1391 138-1392
138-8798 138-8799
185-1394 185-1395 1,3
latest 205-7029 4

**************************************************************************
3516B GENSET APPLICATION
**************************************************************************

50 HZ, CONTINUOUS/PRIME, EMISSIONS *
Flash Part No. Service Replacement Reason
129-4185 128-2851
138-1369 138-1370
138-8800 138-8801
180-3882 180-3883 1,3
latest 205-7037 4

50 HZ, PRIME/PRIME+10/STANDBY, EMISSIONS *
Flash Part No. Service Replacement Reason
129-4186 128-6989
133-6958 133-6959
138-2766 138-2767
180-3880 180-3881 1,3
latest 205-7038 4

50 HZ, CONTINUOUS/PRIME/PRIME+10/STANDBY, EMISSIONS *
Flash Part No. Service Replacement Reason
140-2444 140-2445
176-6042 176-6043 1,3
latest 206-8717 4

50 HZ, CONTINUOUS/PRIME, LO BSFC *
Flash Part No. Service Replacement Reason
130-2606 130-5272
132-3798 132-3799
138-1371 138-1372
138-8802 138-8803
180-3884 180-3885 1,3
latest 206-8718 4

50 HZ, PRIME/PRIME+10/STANDBY, LO BSFC *
Flash Part No. Service Replacement Reason
128-6998 128-6999
133-4665 133-4666
138-1377 138-1378
138-8804 138-8805
180-3886 180-3887 1,3
latest 206-8719 4

50 HZ, CONTINUOUS/PRIME/PRIME+10/STANDBY, LO BSFC *
Flash Part No. Service Replacement Reason
140-2446 140-2447
180-3890 180-3891 1,3
latest 206-8720 4

50 HZ, PRIME/STANDBY, LO BSFC, JWAC *
Flash Part No. Service Replacement Reason
136-7852 136-7853
138-1379 138-1380
180-3888 180-3889 1,3
latest 206-8721 4

60 HZ, CONTINUOUS, EMISSIONS
Flash Part No. Service Replacement Reason
129-3091 129-3092
130-7994 130-7995
132-8713 132-8714
133-4661 133-4662
138-1373 138-1374
180-4618 180-4619 1,3
latest 206-8722 4

60 HZ, CONTINUOUS, LO BSFC
Flash Part No. Service Replacement Reason
129-4188 129-5987
136-5921 136-5922
138-1375 138-1376
185-1400 185-1401 1,3
latest 206-8723 4

60 HZ, PRIME/STANDBY, EMISSIONS
Flash Part No. Service Replacement Reason
129-6784 129-6785
133-6954 133-6955
138-1381 138-1382
138-8806 138-8807
170-8494 170-8495 1,3
latest 206-8724 4

60 HZ, PRIME/STANDBY, EMISSIONS JWAC
Flash Part No. Service Replacement Reason
141-1828 141-1829
180-3892 180-3893 1,3
latest 206-8725 4

60 HZ, PRIME/STANDBY, LO BSFC
Flash Part No. Service Replacement Reason
129-6782 129-6783
132-3796 132-3797
138-1383 138-1384
138-8808 138-8809
180-3894 180-3895 1,3
latest 206-8726 4

60 HZ, PRIME/STANDBY, LO BSFC, JWAC
Flash Part No. Service Replacement Reason
135-6823 135-6824
138-1385 138-1386
185-1398 185-1399 1,3
latest 206-8727 4

3516B SPECIAL SETTINGS

LOCOMOTIVE
Flash Part No. Service Replacement Reason
latest 135-4455 135-4456

**************************************************************************
3508B MARINE AUXILIARY APPLICATION
**************************************************************************

50 HZ, EMISSIONS
Flash Part No. Service Replacement Reason

50 HZ, LO BSFC
Flash Part No. Service Replacement Reason
131-5253 131-5254
135-6815 135-6816
138-1333 138-1334
144-8720 144-8721
183-5053 183-5054 1,3
latest 206-8737 4

60 HZ, EMISSIONS
Flash Part No. Service Replacement Reason

60 HZ, LO BSFC
Flash Part No. Service Replacement Reason
143-7570 143-7571
144-8722 144-8723
183-5057 183-5058 1,3
latest 206-8736 4

**************************************************************************
3512B MARINE AUXILIARY APPLICATION
**************************************************************************

50 HZ, EMISSIONS
Flash Part No. Service Replacement Reason
140-2451 140-2452
144-8724 144-8725
183-5065 183-5066 1,3
latest 206-8735 4

50 HZ, LO BSFC
Flash Part No. Service Replacement Reason
140-2440 140-2441
144-8726 144-8727
183-5067 183-5068 1,3
latest 206-8734 4

60 HZ, EMISSIONS
Flash Part No. Service Replacement Reason
185-3608 185-3609
latest 206-8733 4

60 HZ, LO BSFC
Flash Part No. Service Replacement Reason
129-4190 129-4191
135-6819 135-6820
138-1335 138-1336
144-8728 144-8729
183-5069 183-5070 1,3
latest 206-8732 4

**************************************************************************
3516B MARINE AUXILIARY APPLICATION
**************************************************************************

50 HZ, EMISSIONS
Flash Part No. Service Replacement Reason

50 HZ, LO BSFC
Flash Part No. Service Replacement Reason
138-2768 138-2769
144-8730 144-8731
183-4891 183-4892 1,3
latest 206-8731 4

60 HZ, EMISSIONS
Flash Part No. Service Replacement Reason
135-0182 135-0183
138-2760 138-2761
138-2771 138-2772
144-8732 144-8733
183-5055 183-5056 1,3
latest 206-8730 4

60 HZ, LO BSFC
Flash Part No. Service Replacement Reason
128-6996 128-6997
135-6817 135-6818
138-1339 138-1340
144-5701 144-5702
183-4889 183-4890 1,3
latest 206-8729 4

**************************************************************************
3508B MARINE PROPULSION
**************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
132-4637 132-4639 132-4638 132-4640
135-4457 135-4459 135-4458 135-4560
138-1275 138-1277 138-1276 132-1278
143-7572 143-7574 143-7573 143-7575
170-3328 170-3330 170-3329 170-3331 1
latest 206-8742 206-8743 4

1600 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
135-6831 135-6833 135-6832 135-6834
138-1279 138-1281 138-1280 138-1282
143-7576 143-7578 143-7577 143-7579
170-8472 170-8474 170-8473 170-8475 1
latest 206-8750 206-8751 4

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
133-4653 133-4655 133-4654 133-4656
135-5521 135-5523 135-5522 135-5524
138-1283 138-1285 138-1284 138-1286
143-7580 143-7582 143-7581 143-7583
170-3336 170-3338 170-3337 170-3339 1
latest 206-8744 206-8745 4

1800 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
141-1838 141-1840 141-1839 141-1841
143-9878 143-9880 143-9879 143-9881
170-8476 170-8478 170-8475 170-8477 1
latest 206-8746 206-8747 4

1735 RPM, LIGHT WEIGHT, A RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1785 RPM, LIGHT WEIGHT, B RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
138-1287 138-1289 138-1288 138-1290
138-8810 138-8812 138-8811 138-8813
143-9882 143-9884 143-9883 143-9885
171-2464 171-2466 171-2465 171-2467 1
latest 206-8748 206-8749 4

1835 RPM, LIGHT WEIGHT, C RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
145-4731 145-4733 145-4732 145-4734
171-2472 171-2474 171-2473 171-2475 1
latest 206-8750 206-8751 4

1880 RPM, LIGHT WEIGHT, D RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
131-2762 131-2764 131-2763 131-2765
135-5525 135-5527 135-5526 135-5528
138-8814 138-8816 138-8815 138-8817
143-9886 143-9888 143-9887 143-9889
171-2468 171-2470 171-2469 171-2471 1
latest 206-8752 206-8753 4

1925 RPM, LIGHT WEIGHT, E RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
143-8720 143-8722 143-8721 143-8723
143-9890 143-9892 143-9891 143-9893
176-5976 176-5978 176-5977 176-5979 1
latest 206-8754 206-8755 4

**************************************************************************
3512B MARINE PROPULSION
**************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
131-2766 131-2768 131-2767 131-2769
131-5259 132-4643 131-5260 132-4644
135-4461 135-4463 135-4462 135-4464
136-9014 136-9016 136-9015 136-9017
137-8038 137-8040 137-8039 137-8041
138-1297 138-1299 138-1298 138-1300
138-8818 138-8820 138-8819 138-8821
143-9894 143-9896 143-9895 143-9897
170-8468 170-8470 170-8469 170-8471 1
latest 206-8756 206-8757 4

1600 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
132-4633 132-4635 132-4634 132-4636
135-5529 135-5531 135-5530 135-5532
138-1301 138-1303 138-1302 138-1304
145-3205 145-3207 145-3206 145-3208
170-3314 170-3316 170-3315 170-3317 1
latest 206-8758 206-8759 4

1800 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
140-9598 140-9600 140-9599 140-9601
143-9900 143-9902 143-9901 143-9903
176-6036 176-6038 176-6037 176-6039 1
latest 206-8760 206-8761 4

1735 RPM, LIGHT WEIGHT, A RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1785 RPM, LIGHT WEIGHT, B RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1835 RPM, LIGHT WEIGHT, C RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
148-2945 148-2947 148-2946 148-2948
171-2484 171-2486 171-2485 171-2487 1
latest 206-8766 206-8767 4

1880 RPM, LIGHT WEIGHT, D RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
135-6835 135-6837 135-6836 135-6838
138-1305 138-1307 138-1306 138-1308
143-9906 143-9908 143-9907 143-9909
171-2480 171-2482 171-2481 171-2483 1
latest 206-8764 206-8765 4

1925 RPM, LIGHT WEIGHT, E RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
133-3809 133-3811 133-3810 133-3812
135-5533 133-5535 135-5534 135-5536
137-8042 137-8044 137-8043 137-8045
138-1309 138-1311 138-1310 138-1312
143-9910 143-9912 143-9911 143-9913
171-5648 171-5650 171-5649 171-5651 1
latest 206-8762 206-8763 4

**************************************************************************
3516B MARINE PROPULSION
**************************************************************************

1600 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
131-2770 131-2768 131-2767 131-2769
131-5257 132-4641 131-5258 132-4642
135-5537 135-5539 135-5538 135-5540
138-8822 138-8824 138-8823 138-8825
143-9914 143-9916 143-9915 143-9917
170-3320 170-3322 170-3321 170-3323 1
180-8636 180-8638 180-8637 180-8639 2
latest 207-3605 207-3606 4
1600 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1800 RPM, HEAVY WEIGHT, LO BSFC
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
133-6948 133-6950 133-6949 133-6951
143-9918 143-9920 143-9919 143-9921
176-6120 176-6122 176-6121 176-6123 1
latest 206-8768 206-8769 4
1800 RPM, HEAVY WEIGHT, EMISSIONS
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1735 RPM, LIGHT WEIGHT, A RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1785 RPM, LIGHT WEIGHT, B RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

1835 RPM, LIGHT WEIGHT, C RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
133-4657 133-4659 133-4658 133-4660
135-5541 135-5543 135-5542 135-5544
138-1317 138-1319 138-1318 138-1320
143-9922 143-9924 143-9923 143-9925
176-6124 176-6162 176-6125 176-6127 1
latest 206-8770 206-8771 4

1880 RPM, LIGHT WEIGHT, D RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
131-5255 130-7998 131-5256 130-7999
135-6811 135-6813 135-6812 135-6814
138-1321 138-1323 138-1322 138-1324
143-9926 143-9928 143-9927 143-9929
176-6132 176-6134 176-6133 176-6135 1
latest 206-8772 206-8772 4

1925 RPM, LIGHT WEIGHT, E RATING
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement

**************************************************************************
3516B SPECIAL SETTINGS
**************************************************************************

1855 RPM, LIGHT WEIGHT (D&E maps)
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
132-3741 132-3743 132-3742 132-3744
135-5517 135-5519 135-5518 135-5520
138-1325 138-1327 138-1326 138-1328
143-9930 143-9932 143-9931 143-9933
176-6128 176-6130 176-6129 176-6131 1
latest 206-8774 206-8775 4

1800 RPM, HEAVY WEIGHT, LO BSFC, 1600 RPM HW
Primary Service Backup Service Reason
Flash Part No. Replacement Flash Part No. Replacement
135-6827 135-6829 135-6828 135-6830
138-1329 138-1331 138-1330 138-1332
latest 143-9934 143-9936 143-9935 143-9937

================================================================================
3500B Commercial Engine (Built > 4/97) FLASH File Cross-Reference
Updated 20Mar2006

VERSION D – VERSION D – VERSION D – VERSION D – VERSION D

This software list services engines built after April 1997
that have version ‘D’ ECM’s. Latest software services these
Serial Numbers back to the first Serial Number listed. If
your serial number prefix is listed below, but the serial
number is earlier than the ranges below, use the list
entitled “3500B Commercial Engine (Built < 4/97) FLASH File Cross-Reference." EPG MARINE AUX MARINE PROPULSION LOCOMOTIVE 4GM212-UP 3DM93-UP 2BM123-UP 5PS1-UP 8RM200-UP 8EM258-UP 7HM172-UP 3ZW1-UP 6HN156-UP 9AN121-UP 7SM77-UP 6HZ1-UP 6PN285-UP 3DW1-UP 4TN96-UP 6WN135-UP 1PW1-UP 8CN144-UP 7RN463-UP 2FW1-UP 8KN143-UP 2HW1-UP 1TW1-UP 4AW1-UP 2GW1-UP 1NW1-UP 3CW1-UP 1FZ1-UP 1GZ1-UP 1HZ1-UP NOTE: 3500 with EUI Option Commercial Engine FLASH files are listed in the cross reference entitled "3500 with EUI Option Commercial Engine FLASH File Cross-Reference." ******************************************************************************** Notes for Using This Document ******************************************************************************** Software is listed by application then number of cylinders. All engines are SCAC (Separate Circuit After Cooled) unless specified. Part numbers listed under the "Flash Part No." column are flash file numbers. These are software numbers that can be downloaded from the Caterpillar mailbox or SISWeb or copied from the SIS Flash Files CD. These numbers can NOT be ordered from the parts distribution system. Flash files must be used when updating software electronically using Winflash in Cat ET. A part number listed under the "Chip Version" column is the part number of the removable chip inside the ECM that contains the flash file software listed left of it. EXAMPLE: 50 HZ, 1500 RPM, CONTINUOUS/PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 159-4667 159-4668 6 latest 176-6148 176-6149 16,18,21,23 In the example above, assume that an engine ECM currently has the 159-4667 flash file in it. The latest flash file available for this engine is 176-6148 as indicated. Most dealers would use Cat ET to flash this 176-6148 flash file into the ECM. If the dealer did not have flash capability, the 176-6149 chip could be ordered from the parts distribution system and installed into the ECM through the access cover on the back. The 176-6149 chip is pre-flashed with the 176-6148 flash file. These "chips" are made available for a very small percentage of service locations that do not have flash capability. These parts must be ordered from the parts distribution system and physically installed in the ECM using the access cover. Most dealers will never order chips from the "Chip Version" column. The flash method of updating software described above is the preferred method. The chips will be phased out in the future as dealers around the world upgrade tooling and training for electronic engines. As of 1/1/2001 the LEC has stopped making the chip version of software for new releases. all future software updates will be "flash only" and dealers must have Cat ET and the necessary hardware and training to flash update engines. ******************************************************************************** Reasons for software change: ******************************************************************************** 1. Minor adjustments to torque and timing maps to add B rating. 2. Fix to keep backup ECM from assuming control if engine is restarted via a remote start/stop switch without first cycling power to the ECM. S.L. PI3078 3. Fix to correct Premium EIP problem with Aftercooler temperature gage sealing. 4. Updated programmable monitoring system and raised max altitude derate trip point. 5. Timing map adjustment. 6. Revised timing maps for common turbo. 7. Change to programmable monitoring system and default aftercooler temp raised for JWAC. 8. Torque map adjusted. 9. Torque and timing map changes for Larne low power resolution. Used on SCAC and JWAC engines. 10. Correction to error in FIND-Text. 11. Smoke map revision. Smoke map interfered after rack change in test spec. 12. Interim fix for Woodward Loadshare Module low voltage problem. At low idle the generator may not produce enough voltage to power up the Woodward Load Share Module. Therefore, no PWM speed signal will be sent from the WLSM to the ECM. This causes the engine to remain at low idle with an active 91-8 invalid throttle signal code. The new ECM software allows the low idle speed to be programmed to a higher value. This allows the generator to produce more voltage and power up the WLSM. Suggested low idle setting is 1200 RPM for 1800 RPM engines. 13. Modified torque map for GL witness test. Engine performance in field is unaffected by this change. 14. High idle was adjusted per customer request. 15. Several problems are fixed with this update. A) Fix for Engine Protection Override Switch (EPOS) problem. Some versions of software do not recognize the (EPOS) and will not allow an engine triggered shutdown to be overridden. See service letter PI1395. B) Fix for the General Alarm Relay (GAR). Some versions of previous software did not operate the GAR as designed. This relay is used by some installations to relay certain monitoring system events to the vessel control system. C) Fix for intermittent EMSII "!Stop" light flashing. See 15 July 1998 TIB entitled "Intermittent Engine Monitoring System (EMS) "!Stop" Light Flashing On Marine Propulsion Engines." (Removed in reason code 17) D) Fix for Engine Vision Display Error. A negative crankcase pressure value would cause Engine Vision to display "Error". The new software eliminates this problem. (Removed in reason code 17) 16. Fix for erroneous logging of high crankcase pressure events. New software has improved software filtering of crankcase pressure sensor raw data to stabilize readings and eliminate false event logging. (Removed in reason code 17) 17. The software released with reason codes 15 & 16 may have a 101-13 crankcase pressure calibration required diagnositc. The diagnostic can be cleared by performing a manual calibration, but it often returns when power to the ECM is cycled. It was necessary to release software that had a vaild fix for the EPOS problem described in reason code 15 above, but the resulting software with an active 101-13 was not acceptable. Therefore this new software with reason code 17 was released. It contains fixes for the EPOS & GAR problems (reason codes 15 A & B). The remaining fixes for reason codes 15 C, D, and 16 were taken out of this new software to avoid the 101-13 problem. These fixes that were removed will be put back into the next software update along with a few new bug fixes. This update is expected during 2Q 1999. 18. A change was made to the 94-02 and 289-02 fuel pressure sensor misinstalled diagnostic strategies to reduce false logging. The diagnostics will no longer activate below 200 RPM. Electronic filtering was also added to the software for the fuel pressure signals for more stable readings. A March 17, 1999 TIB will also help to properly identify the filtered and unfiltered fuel pressure sensor ports. 19. Solutions for Reason Codes 15 C & D and 16 that were removed in Reason Code 17 have been corrected and added back to the software. The false logging of 101-13 has been eliminated. 20. Solution to EMSII 248-02 code and light flashing issue mentioned in Jan 28, 1998 TIB. This issue only affects Marine Propulsion applications equipped with Pilothouse panels. 21. Improved inlet air restriction and oil pressure monitoring. This should help to reduce false high inlet air restriction warnings. 22. Added Direct Fueling programmable parameter. When the feature is enabled the PWM signal is used by the ECM as a desired rack signal. This allows an external governor to control engine fueling directly. When the feature is disabled the PWM signal is used by the ECM as a desired speed signal and the ECM performs governing functions. The Direct Fueling feature was developed so the petroleum industry SCR systems could more easily interface with 3500B engines. Typically other hardware is required when the direct fueling option is enabled. 23. Software added dedicated low idle switch input (J1-P26)to ECM. Earlier EPG engines with switchgear conversion panels (Electronic Instrument Panels) would activate a 91-08 Speed Control Output Signal Is Abnormal diagnostic when the low idle switch was activated. The diagnostic became active because the switch was wired in-line with the PWM speed control signal. When a 91-08 diagnostic is active the ECM defaults to low idle so the switch has the intended effect. However, the active diagnostic created problems with certain electronic monitoring systems. The new dedicated low idle switch ECM input allows the switch to request low idle speed without opening the speed control signal and activating the 91-08 diagnostic. This feature can be utilized on all previous 3500B EPG engines by rewiring the low idle switch. The engine uses the speed control signal to determine desired speed when ECM J1-P26 is open. Low idle becomes the desired speed when J1-P26 is grounded. If the switch wiring is not changed on EPG engines when the new software is flashed, the low idle switch will continue to operate as it always has - activating the 91-08 diagnostic. However, Marine Auxiliary engines that are field updated with the new software will need to make a wiring change. ECM J1-P26 on Marine Aux engines currently has circuit 412-BU connecting it to the Electronic Speed Switch (ESS) pin 12. This circuit currently serves no function and can be disconnected by removing the wire from pin 12 of the ESS and tying it back or installing the low idle switch. IF THIS CHANGE IS NOT MADE, THE ENGINE WILL REMAIN AT LOW IDLE. Note: The low idle switch input feature will not eliminate a 91-08 diagnostic code caused by a Woodward Load Share Module that is powered by the generator potential Transformers (PTs). This can be eliminating by upgrading to the new 161-0797 24 VDC WLSM. Refer to Special Instruction REHS0532 and August 1999 Engine News article entitled "New Governor Control (Load Share Module) for Generator Set Engines" for details. 24. Disabled "Butt-Engagement Detection" strategy for starter. Normally this strategy checks for engine rotation during cranking and will de-energize the start motor solenoid if no engine rotation is detected within 3 seconds. However, the strategy may prevent starting if used on engines with air starters and air prelube systems that are initiated by the start motor solenoid. Engines used in petroleum applications commonly have this feature disabled. 25. Improved 94-02 and 289-02 fuel pressure sensor misinstalled diagnostic strategy. The previous change in reason code 18 was only partially successful. The new strategy increases the amount of negative fuel pressure differential required to log the misinstalled codes from -15 kPa to -70 kPa. In addition, the absolute value of the fuel filter differential pressure is now used for display purposes and event logging. This will allow the ECM to monitor differential pressure even if the sensors are installed backward. 26. The percent load calculation has been changed to more accurately reflect engine load. The new percent load calculation also effects the Load Feedback signal ECM output. Be certain to verify that the new software strategy will not adversely effect vessel control systems that utilize this output before flashing the ECM with the new software. 27. The Low Coolant Temperature warning strategy has been improved. This strategy has been improved to reduce low coolant temperature warnings when the engine is lightly loaded. The strategy now uses engine load as well as coolant temperature to determine if the engine is being over cooled. A new Coolant Warning Engine Load Enable Threshold parameter has been added to support this feature. This parameter label will be used in forthcoming versions of Cat ET. Until then the parameter will show up as Load Warning Set. 28. FLS/FTS power adjustment added. Factory level passwords are required to change FLS and FTS. FLS and FTS may be programmed without passwords once on a new (blank) ECM. This occurs when the tattletale is zero. Cat ET Version 3.2 or later is required to program FLS/FTS. 29. The monitoring system is now disabled when engine speed is zero. It was previously possible for the monitoring system to activate an alarm with no engine speed. This resulted in nuisance alarms in applications where the electrical system is left powered up when the engine is not running. 30. Programmable governor gains added. Engine ECM governor gains may be adjusted if the default gain factors do not provide satisfactory system response characteristics. Default governor gain settings are recommended for almost all applications. If changing gain parameters refer to Special Instruction form REHS1109. 31. Rated Fuel Default to Minimum. When replacing a failed ECM the rated fuel limit parameter will now default to a minimum value. The parameter will need to be programmed after the correct value has been obtained from TMI. Previously, the rated fuel limit parameter defaulted to a maximum value and engine damage could occur if it was not properly programed following an ECM replacement. 32. Altitude derate annunciation supression on EMSII. Altitude derate causes the EMSII "!Stop" light to flash. Many customers knowingly operate in derate mode and the continuous light flashing is a nuisance and may disguise a new diagnostic. For this reason, altitude derate will now cause the EMSII "!Stop" light to flash for 15 seconds. After 15 seconds the light will stop flashing. The derate is still active and can be viewed with Cat ET. Only the annunication of the derate has changed. 33. Minimum oil pressure map for low oil pressure warnings is now 69 kPa at low engine speeds. This value was increased to provide added protection to turbochargers. 34. Torque Limit feature added. Programmable parameter allows engine torque to be limited. Parameter may be programmed to a value between torque at rated speed and peak torque. 35. General alarm relay feature updated. The general alarm relay will now activate for low fuel level and low coolant level. These two conditions did not previously activate the general alarm relay. 36. Injector E-Trim feature has been updated. A 1495-02 "Injector Trim Not Prog" diagnostic code will activate if the injector trim calibration codes have not been entered. Previously the injector trim codes defaulted to 1100 (no adjustment) and no diagnostic was present. The 1495-02 diagnostic will activate when updating software on existing engines containing injectors that do not have trim codes. To fix the problem, go the calibration screen in Cat ET and reprogram all of the codes to 1100. If the injectors in the engine DO have trim codes program those trim codes into Cat ET. 37. 100-hour programmable parameter grace period has been restored. The grace period allows certain parameters to be programmed without factory passwords during the first 100 hours to simplify installation and commissioning. This grace period was inadvertently removed from some flash files. 38. Changed timing map to correct high idle instability issue for PIR E5-01-012. Unstable engine speed is sometimes seen during high speed, very low load conditions on EPA/IMO certified ratings. Instability goes away when engine load is applied or engine speed is reduced. Certain best BSFC genset ratings are also affected when a cooling fan is NOT used. 39. High idle engine speed was reduced from 2050 rpm down to 1950 rpm in oil well fracturing applications. 40. High idle engine speed was reduced from 2050 rpm down to 1920 rpm in oil well fracturing applications. 41. Hydraulic air shutoff actuation duration time increased to five seconds. 42. Diagnostic lamp capabilities added. 43. High idle was reduced to 1515 rpm. 44. Torque limit feature added. 45. High idle instability fix. 46. 1495-02 (injector trim code not programmed) fix. 47. Starter butt engagement feature disabled. 48. Torque map change 49. Fuel map change 50. Torque limit feature modified lowering the minimum value. 51. Contains wrong high idle 52. Contains correct high idle. 53. Contains injector launch detection strategy. 54. Torque map change enhancing low rpm performance 55. Added shutdown for detection of injector "launch" 56. Revised default governor gains to correct problem with adjustable gains. 57. Allows low idle down to 450 RPM 58. Changes oil pressure diagnostics for cold start-up. 59. Updated template to provide 3 miniute delay on oil pressure at cold startup 60. Updated Torque and timing maps 61. Updated Core map to provide latest default governor gains. 62. Corrected the Core map to update the default governor gains. 63. Adjustable idle from 450 to 1800 RPM depending on engine rating 64. Updated timing maps 65. Updated Torque maps 66. Updated the 94-11 code (fuel pressure dropped below 320 kpa for more than 20 sec. 67. Low idle set to 450 RPM 68. High idle set to 1300RPM ******************************************************************************** 3508B GENSET APPLICATIoN ******************************************************************************** 50 HZ, 1000 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC Flash Part No. Chip Version Reason 177-3006 177-3007 177-3008 203-9249 N/A 22, 25-33 205-6961 37 latest 227-4875 45, 46 50 HZ, 1500 RPM, CONTINUOUS, LO BSFC Flash Part No. Chip Version Reason 149-6132 149-6133 162-3930 162-3931 5 176-6150 176-6151 16,18,21,23 203-9244 N/A 22, 25-33 latest 205-6969 37 50 HZ, 1500 RPM, PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 149-0331 149-0332 156-3704 156-3705 4 latest 185-1858 185-1859 16,18,21,23 50 HZ, 1500 RPM, PRIME/PRIME+10/STANDBY, LO BSFC Flash Part No. Chip Version Reason 148-2935 148-2936 176-6144 176-6145 16,18,21,23 212-4410 N/A latest 227-4873 N/A 46 50 HZ, 1500 RPM, PRIME/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 148-3647 148-3648 156-3700 156-3701 4 176-6144 N/A 212-4410 N/A 16,18,21,23 latest 227-4873 N/A 46 50 HZ, 1500 RPM, CONTINUOUS/PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 159-4667 159-4668 6 176-6148 176-6149 16,18,21,23 203-9243 N/A 22, 25-33 205-6970 37 latest 229-0266 45, 46 50 HZ, 1500 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 163-0671 163-0672 6 176-6150 176-6151 16,18,21,23 205-6969 latest 229-0265 45, 46 60 HZ 1200 RPM, Low BSFC Flash Part No. Chip Version Reason 201-1668 latest 229-0267 45, 46 60 HZ, 900 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC Flash Part No. Chip Version 60 HZ, 1200 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, EPA CERT Flash Part No. Chip Version Reason 185-2953 185-2954 204-2498 N/A 22, 25-33 latest 227-4874 45, 46 60 HZ, 1800 RPM, CONTINUOUS, EMISSIONS Flash Part No. Chip Version Reason 148-2937 148-2938 156-3708 156-3709 4 162-8201 162-8202 5 176-6160 176-6161 16,18,21,23 203-9246 N/A 22, 25-33 205-6967 37 latest 229-0264 45, 46 60 HZ, 1800 RPM, CONTINUOUS, LO BSFC Flash Part No. Chip Version Reason 157-3698 157-3699 10 157-3702 157-3703 5 176-6158 176-6159 16,18,21,23 203-9245 N/A 22, 25-33 205-6968 latest 229-0263 45, 46 60 HZ, 1800 RPM, PRIME/PRIME+10/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 152-5500 152-5501 153-3036 153-3037 5 latest 185-1856 185-1857 16,18,21,23 60 HZ, 1800 RPM, PRIME/PRIME+10/STANDBY, LO BSFC Flash Part No. Chip Version Reason 149-0327 149-0328 latest 176-6146 176-6147 16,18,21,23 60 HZ, 1800 RPM, PRIME/PRIME+10/STANDBY, EPA CERT Flash Part No. Chip Version Reason 180-8681 180-8682 203-9250 N/A 22, 25-33 205-6964 37 Latest 227-4872 45, 46 60 HZ, 1800 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 148-2941 148-2942 156-3706 156-3707 4 163-0673 163-0674 6 176-6172 176-6173 16,18,21,23 203-9247 N/A 22, 25-33 205-6966 37 209-9741 38 latest 227-4877 45, 46 ******************************************************************************** 3512B GENSET APPLICATION ******************************************************************************** 50 HZ 1000 RPM, Low BSFC Flash Part No. Chip Version Reason 201-1674 latest 228-5157 45, 46 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, EMISSIONS Flash Part No. Chip Version Reason 147-9583 147-9584 164-2034 164-2035 9 176-6192 176-6193 16,18,21,23 201-1673 N/A 22, 25-33 205-6943 37 latest 228-5154 45, 46 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, EMISSIONS, REV ROTATION Flash Part No. Chip Version Reason 153-3019 153-3020 176-6186 176-6187 16,18,21,23 201-1678 N/A 22, 25-33 205-6938 37 latest 228-5165 45, 46 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, LO BSFC Flash Part No. Chip Version Reason 148-2943 148-2944 150-8472 150-8473 163-6380 163-6381 9 180-5070 180-5071 16,18,21,23 201-1666 N/A 22, 25-33 205-6941 N/A 37 227-4882 N/A 46 latest 266-2984 65 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, LO BSFC, REV ROTATION Flash Part No. Chip Version Reason 180-0620 180-0621 203-9255 N/A 22, 25-33 205-6937 37 latest 228-5163 45, 46 60 HZ/ 50HZ, PR, JWAC, DUAL 60HZ Chip 50HZ Service Flash Part No. Replacement Flash Part No. Replacement Reason 149-3453 149-3454 149-3455 149-3456 176-6196 176-6197 176-6198 176-6199 16,18,21,23 201-1665 N/A 22, 25-33 205-6940 208-6651 37 latest 228-5164 45, 46 60 HZ 1200 Low BSFC Flash Part No. Chip Version Reason 201-1672 latest 228-5155 45, 46 60 HZ, 900 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC Flash Part No. Chip Version 60 HZ, 1200 RPM, CONTINUOUS/PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 163-6368 163-6369 176-6180 176-6181 16,18,21,23 204-2492 N/A 22, 25-33 208-6647 37 latest 228-5156 46 60 HZ, 1200 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 151-7131 164-2040 164-2041 180-1730 180-1731 16,18,21,22,23 204-2493 N/A 22, 25-33 208-6650 37 latest 228-5162 46 60 HZ, 1200 RPM, CONTINUOUS/PRIME/STANDBY, EPA CERT Flash Part No. Chip Version Reason 185-2997 185-2998 204-2494 N/A 22, 25-33 205-6934 37 latest 228-5158 46 60 HZ, 1800 RPM, CNT/PR/PR+10/SB, EMISSIONS Flash Part No. Chip Version Reason 148-2931 148-2932 164-2038 164-2039 9 176-5990 176-5991 16,18,21,23 201-1676 N/A 22, 25-33 205-6944 37 latest 227-4881 46 60 HZ, 1800 RPM, CNT/PR/PR+10/SB, LO BSFC Flash Part No. Chip Version Reason 147-9585 147-9586 164-2036 164-2037 9 167-0587 167-0288 12 176-6040 176-6041 16,18,21,23 201-1671 N/A 22, 25-33 205-6942 37 latest 228-5153 46 60 HZ, 1800 RPM, CNT/PR/PR+10/SB, EPA CERT Flash Part No. Chip Version Reason 180-8679 180-8680 201-1661 N/A 22, 25-33 205-6945 37 latest 228-5159 45, 46 60 HZ, 1800 RPM, CNT/PR/PR+10/SB, LO BSFC, JWAC Flash Part No. Chip Version Reason 148-1963 148-1964 155-1747 155-1748 4 164-2036 164-2037 9 167-0587 167-0288 12 176-6040 176-6041 16,18,21,23 201-1671 N/A 22, 25-33 latest 205-6942 37 ******************************************************************************** 3516B GENSET APPLICATION ******************************************************************************* 60 HZ, 1800 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC Flash Part No. Chip Version Reason 189-8564 latest 231-5007 47 50 HZ, 1500 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, LO BSFC Flash Part No. Chip Version Reason 215-5811 latest 224-3075 47 60 HZ 1800 RPM Standby (Special Rating) 180-4616 60 HZ 1800 RPM Standby 209-9739 228-5169 46 242-5347 53 251-3191 58 Latest 271-0368 66 60 HZ Low NOX 1200 RPM Flash Part No. Chip Version Reason 213-9322 228-5179 46 261-7506 59 Latest 271-0378 66 60 HZ 1200 RPM Low NOX Land Electric Flash Part No. Chip Version Reason 212-4417 228-5178 46 261-7505 59 Latest 271-0377 66 60 HZ/50 HZ, PRIME/PRIME+10, LO BSFC, DUAL Flash Part No. Replacement Flash Part No. Replacement Reason 161-1792 161-1793 161-1794 161-1795 180-3405 180-3406 180-3407 180-3408 16,18,21,23 201-1685 N/A 22, 25-33 latest 205-6997 37 50 HZ, 1000 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 175-5354 175-5355 latest 204-2487 N/A 22, 25-33 50 HZ, 1500 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 149-6150 149-6151 176-6048 176-6049 16,18,21,23 201-1693 N/A 22, 25-33 205-7001 N/A 37 228-5172 N/A 46 242-5353 N/A 53 251-3195 N/A 58 Latest 272-2468 66 50 HZ, 1500 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, LO BSFC Flash Part No. Chip Version Reason 148-3674 148-3675 149-0335 149-0336 4 158-7626 158-7627 6 169-2607 169-2608 176-6050 176-6051 16,18,21,23 201-1691 n/a 22, 25-33 205-7000 n/a 37 228-5176 n/a 46 251-3194 n/a 58 242-5350 n/a 53 261-7507 n/a 59 Latest 272-2466 66 50 HZ, 1500 RPM, CONTINUOUS/PRIME/PRIME+10/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 153-3038 153-3039 latest 176-6042 176-6043 16,18,21,23 60 HZ, 900 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC Flash Part No. Chip Version Reason 60 HZ, 1200 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC, JWAC Flash Part No. Chip Version Reason 150-7974 150-7975 latest 180-1728 180-1729 16,18,21,22,23 60 HZ, 1200 RPM, CONTINUOUS/PRIME/PRIME+10, EPA CERT Flash Part No. Chip Version Reason 185-2963 185-2964 204-2497 N/A 22, 25-33 latest 228-5168 46 60 HZ, 1800 RPM, PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 149-0337 149-0338 154-8117 154-8118 5 latest 183-6927 183-6928 16,18,21,23 60 HZ, 1800 RPM, PRIME/STANDBY, EMISSIONS, JWAC Flash Part No. Chip Version Reason 60 HZ, 1800 RPM, PRIME/PRIME+10/STANDBY, LO BSFC Flash Part No. Chip Version Reason 148-2923 148-2924 latest 180-3426 180-3427 16,18,21,23 60 HZ, 1800 RPM, CONTINUOUS/PRIME/PRIME+10, EPA CERT Flash Part No. Chip Version Reason 180-8677 180-8678 200-7886 N/A 22, 25-33 205-7002 37 228-5166 45, 46 242-5349 53 251-3193 N/A 58 Latest 271-0370 66 60 HZ, 1800 RPM, PRIME/PRIME+10/STANDBY, LO BSFC, JWAC *********For Rotary UPS ONLY (1750-1850 RPM Throttle rescaling)*************** Flash Part No. Chip Version Reason 165-9155 165-9156 12 201-1687 N/A 22, 25-33 latest 205-6994 37 60 HZ, 1800 RPM, CONTINUOUS/PRIME/STANDBY, EMISSIONS Flash Part No. Chip Version Reason 151-7166 151-7167 163-0669 163-0670 6 180-1736 180-1737 16,18,21,23 188-3233 N/A 201-1689 N/A 22, 25-33 205-6999 N/A 37 228-5171 N/A 45, 46 242-5351 N/A 55 251-3189 N/A 58 Latest 271-0367 66 60 HZ, 1800 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC Flash Part No. Chip Version Reason 148-2921 148-2922 156-3702 156-3703 4 155-1725 155-1726 157-3700 157-3701 6 163-6378 180-1734 180-1735 16,18,21,23 201-1687 N/A 22, 25-33 205-6998 37 228-5170 45, 46 242-5348 53 251-3192 N/A 58 Latest 271-0369 66 ******************************************************************************** 3508B MARINE AUXILIARY APPLICATION ******************************************************************************** 50 HZ 1000 RPM, Low BSFC Flash Part No. Chip Version Reason 176-6188 latest 229-0279 45, 46 50 HZ, 1000 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2969 185-2970 204-2496 N/A 22, 25-33 205-6977 N/A 37 205-6989 N/A 34 latest 229-0275 N/A 46 50 HZ, 1500 RPM, EMISSIONS Flash Part No. Chip Version Reason 149-6146 149-6147 183-5049 183-5050 16,18,21,23 203-9236 N/A 22, 25-33 205-6975 35 latest 229-0278 45, 46 50 HZ, 1500 RPM, LO BSFC Flash Part No. Chip Version Reason 148-1961 148-1962 183-5047 183-5048 16,18,21,23 203-9241 N/A 22, 25-33 205-6973 37 latest 229-0277 45, 46 50 HZ, 1500 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2973 185-2974 204-2495 N/A 22, 25-33 205-6959 37 latest 229-0271 45, 46 60 HZ, 1200 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC Flash Part No. Chip Version Reason 159-4675 159-4676 10 183-7549 183-7550 16,18,21,23 203-9238 N/A 22, 25-33 205-6974 37 latest 229-0276 45, 46 60 HZ, 1200 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2971 185-2972 203-9242 N/A 22, 25-33 205-6971 37 latest 229-0274 45, 46 60 HZ, 1800 RPM, EMISSIONS Flash Part No. Chip Version Reason 153-3040 153-3041 176-6156 176-6157 16,18,21,23 203-9251 N/A 22, 25- 205-6963 37 latest 230-9547 45, 46 60 HZ, 1800 RPM, LO BSFC Flash Part No. Chip Version Reason 154-8113 154-8114 183-5051 183-5052 16,18,21,23 203-9237 N/A 22, 25-33 205-6972 37 latest 229-0273 45, 46 60 HZ, 1800 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2977 185-2978 203-9253 N/A 205-6960 22, 37 latest 229-0272 45, 46 ******************************************************************************** 3512B MARINE AUXILIARY APPLICATION ******************************************************************************** 50 HZ, 1000 RPM, LO BSFC, JWAC Flash Part No. Chip Version Reason 162-3916 162-3917 183-7501 183-7502 16,18,21,23 200-7884 N/A 22, 25-33 205-6954 37 latest 230-9544 45, 46 50 HZ, 1000 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2989 185-2990 203-9227 N/A 22, 25-33 205-6951 37 latest 230-9543 45, 46 50 HZ, 1500 RPM, LO BSFC Flash Part No. Chip Version Reason 148-2933 148-2934 150-8481 150-8482 8 158-7632 158-7633 4 183-5059 183-5060 16,18,21,23 203-9231 N/A 22, 25-33 205-6950 37 latest 229-0280 45, 46 50 HZ, 1500 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2994 185-2995 203-9234 N/A 22, 25-33 205-6947 37 latest 229-0269 45, 46 50 HZ, 1500 RPM, PRIME, LO BSFC, REVERSE ROTATION Flash Part No. Chip Version 151-5395 151-5396 183-5061 183-5062 16,18,21,23 203-9232 N/A 22, 25-33 205-6949 37 latest 229-0283 45, 46 60 HZ, 1200 RPM, CONTINUOUS/PRIME, IMO CERT Flash Part No. Chip Version Reason 185-2992 185-2993 203-9229 N/A 22, 25-33 205-6953 37 latest 230-9545 45, 46 60 HZ, 1800 RPM, EMISSIONS Flash Part No. Chip Version Reason 173-5887 173-5888 184-2507 184-2508 16,18,21,23 203-9230 N/A 22, 25-33 205-6952 37 latest 229-0281 45, 46 60 HZ, 1800 RPM, LO BSFC Flash Part No. Chip Version Reason 149-0329 149-0330 153-3021 153-3022 4 173-2932 173-2933 18 183-5063 183-5064 16,18,21,23 201-1679 N/A 22, 25-33 205-6939 37 latest 229-0282 45, 46 60 HZ, 1800 RPM, IMO CERT Flash Part No. Chip Version Reason 185-2999 185-2930 203-9235 N/A 22, 25-33 205-6946 37 latest 229-0270 45, 46 ******************************************************************************** 3516B MARINE AUXILIARY APPLICATION ******************************************************************************** 1800 RPM, IMO Cert. Flash Part No. Chip Version Reason 209-9736 latest 231-5006 45, 46 50 HZ 1500 RPM Low NOX Flash Part No. Chip Version Reason 212-4409 latest 228-5160 45, 46 50 HZ, 1000 RPM, IMO CERT Flash Part No. Chip Version Reason 185-3007 185-3008 213-9335 latest 228-5180 45, 46 50 HZ, 1500 RPM, EMISSIONS Flash Part No. Chip Version 50 HZ, 1500 RPM, LO BSFC Flash Part No. Chip Version Reason 151-7127 151-7128 183-4893 183-4894 16,18,21,23 205-7005 37 latest 229-0284 45, 46 50 HZ, 1500 RPM, IMO CERT Flash Part No. Chip Version Reason 185-3011 185-3012 205-6996 37 209-9734 44 latest 224-3082 45, 46 60 HZ, 1200 RPM, IMO CERT Flash Part No. Chip Version Reason 185-3009 185-3010 207-3613 22, 25-34 212-4416 N/A latest 230-5070 45, 46 60 HZ, 1800 RPM, EMISSIONS Flash Part No. Chip Version Reason 149-6160 149-6161 176-6152 176-6153 16,18,21,23 201-1690 N/A 22, 25-33 205-7006 latest 229-0285 45, 46 60 HZ, 1800 RPM, LO BSFC Flash Part No. Chip Version Reason 148-3635 148-3636 164-2044 164-2045 12 173-2931 N/A 18 183-4895 183-4896 16,18,21,23 201-1680 22, 25-33 205-7007 37 latest 229-0286 45, 46 60 HZ, 1800 RPM, IMO CERT Flash Part No. Chip Version Reason 185-3015 185-3016 191-8357 213-9334 latest 229-0268 45, 46 ******************************************************************************** 3508B MARINE PROPULSION ******************************************************************************** 1200 RPM, HEAVY WEIGHT, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-2955 185-2957 185-2956 185-2958 194-4889 205-1571 205-1572 25-37 231-4360 231-4361 46 latest 236-2274 1600 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-0315 149-0317 149-0316 149-0318 151-7154 151-7156 151-7155 151-7157 2 168-8338 168-8340 168-8339 168-8341 176-5920 176-5922 176-5921 176-5923 18-21 197-0557 197-0558 25-29 latest 227-4861 227-4862 46 1600 RPM, HEAVY WEIGHT, EMISSIONS Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 155-1731 155-1733 151-1732 151-1734 176-5924 176-5926 176-5925 176-5927 18-21 205-6981 205-6982 25-37 latest 227-4863 227-4864 46 1600 RPM, HEAVY WEIGHT, ABOVE 1000 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3025 185-3027 185-3026 185-3028 200-2019 204-2505 204-2506 25-37 latest 224-3080 224-3081 46 1600 RPM, HEAVY WEIGHT, BELOW 1000 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 188-0593 188-0595 188-0594 188-0596 197-3986 197-3987 25-29 205-1569 205-1570 25-37 latest 224-3085 224-3086 46 1800 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 153-1050 153-1052 153-1051 153-1053 168-8346 168-8348 168-8347 168-8349 176-5952 176-5954 176-5953 176-5955 18-21 209-9742 209-9743 25-37 latest 227-4859 227-4860 46 1800 RPM, HEAVY WEIGHT, EMISSIONS Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1800 RPM, HEAVY WEIGHT, ABOVE 1000 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3031 185-3033 185-3032 185-3034 205-1567 205-1568 25-37 latest 231-4354 231-4355 46 1800 RPM, HEAVY WEIGHT, BELOW 1000 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3036 185-3038 185-3037 185-3039 204-2507 204-2508 25-37 latest 231-4356 231-4357 46 1735 RPM, LIGHT WEIGHT, A RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1785 RPM, LIGHT WEIGHT, B RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 159-4663 159-4665 159-4664 159-4666 168-6557 168-6559 168-6558 168-6560 15, 16 173-2913 173-2915 173-2914 173-2916 17 176-5940 176-5942 176-5941 176-5943 18-21 205-6987 205-6988 25-37 latest 227-4865 227-4866 46 1785 RPM, LIGHT WEIGHT, B RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3048 185-3050 185-3049 185-3051 205-1573 205-1574 25-37 latest 231-4358 231-4359 46 1835 RPM, LIGHT WEIGHT, C RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 161-1788 161-1790 161-1789 161-1791 168-2225 168-2227 168-2226 168-2228 15, 16 173-2917 173-2919 173-2918 173-2920 17 176-5956 176-5958 176-5957 176-5959 18,19,20,21 205-6985 205-6986 25-37 227-4867 227-4868 latest 232-2635 232-2636 48 1835 RPM, LIGHT WEIGHT, C RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3052 185-3054 185-3053 185-3055 197-3967 197-3968 25-29 205-1587 205-1588 51 208-6655 208-6656 Latest 231-4352 231-4353 25-37, 52 1880 RPM, LIGHT WEIGHT, D RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3040 185-3042 185-3041 185-3043 latest 205-1589 205-1590 25-37 1925 RPM, LIGHT WEIGHT, E RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 164-4511 164-4513 164-4512 164-4514 168-6561 168-6563 168-6562 168-6564 15, 16 173-2921 173-2923 173-2922 173-2924 17 176-5964 176-5966 176-5965 176-5967 18-21 latest 205-6983 205-6984 25-37 1925 RPM, LIGHT WEIGHT, E RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3044 185-3046 185-3045 185-3047 205-1591 N/A 205-1592 N/A 25-37 latest 232-2631 N/A 232-2632 N/A 46 900 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1200 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 151-5939 151-5941 151-5940 151-5942 156-9256 156-9258 156-9257 156-9259 7 168-2005 168-2007 168-2006 168-2008 15, 16 173-2909 173-2911 173-2910 173-2912 17 176-5916 176-5918 176-5917 176-5919 18,19,20,21 207-3618 207-3619 25-37 208-6648 latest 227-4857 46 1600 RPM, HEAVY WEIGHT, LO BSFC (Special) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 150-7961 150-7963 150-7962 150-7964 151-7170 151-7172 151-7171 151-7173 2 latest 176-5932 176-5934 176-5933 176-5935 18-21 1600 RPM, HEAVY WEIGHT, LO BSFC (Special Dredge) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 147-0763 147-0765 147-0764 147-0766 151-7179 151-7181 151-7180 151-7182 2 latest 176-5928 176-5930 176-5929 176-5931 18-21 1860 RPM, HEAVY WEIGHT, LO BSFC (Special) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-6134 149-6136 149-6135 149-6137 152-5490 152-5492 152-5491 152-5493 2 latest 176-5960 176-5962 176-5961 176-5963 18-21 1600 RPM, HEAVY WEIGHT, (Special - POWER LIMITED) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version latest 158-7634 158-7636 158-7635 158-7637 1800 RPM, HEAVY WEIGHT, 883kw, LO BSFC (Special) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 151-5391 151-5393 151-5392 151-5394 latest 176-5944 176-5946 176-5945 176-5947 18-21 ******************************************************************************** 3512B MARINE PROPULSION ******************************************************************************** 900 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 162-8197 162-8199 162-8198 162-8200 168-2245 168-2247 162-2246 162-2248 15, 16 173-2889 173-2891 173-2890 173-2892 17 176-5980 176-5982 176-5981 176-5983 18,19,20,21 latest 226-2357 226-2358 46 1200 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 156-9260 156-9262 156-9261 156-9263 168-2241 168-2243 168-2242 168-2244 15, 16 173-2885 173-2887 173-2886 173-2888 17 176-5984 176-5986 176-5985 176-5987 18,19,20,2 197-3948 197-3949 25-29 latest 224-3093 224-3094 46 1200 RPM, HEAVY WEIGHT, ABOVE 1300 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3056 185-3058 185-3057 185-3059 197-3990 197-3991 25-29 204-2503 204-2504 30-34 latest 230-5077 230-5078 46 1200 RPM, HEAVY WEIGHT, BELOW 1210 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3060 185-3062 185-3061 185-3063 192-3727 192-3727 197-3999 197-4000 25-29 205-1549 205-1550 30-37 latest 230-5075 230-5076 46 1600 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-0311 149-0313 149-0312 149-0314 151-7158 151-7160 151-7159 151-7161 2 153-3027 153-3029 153-3028 153-3030 8 168-8350 168-8352 168-8351 168-8353 16 176-5996 176-5998 176-5997 176-5999 17-21 197-0567 197-0568 25-29 latest 226-2342 226-2343 46 1600 RPM, HEAVY WEIGHT, EMISSIONS Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 164-4515 164-4517 164-4516 164-4518 15, 16 168-6553 168-6555 168-6554 168-6556 173-2901 173-2903 173-2902 173-2904 17 176-5992 176-5994 176-5993 176-5995 18,19,20,21 205-6925 205-6926 25-37 latest 226-2344 226-2345 46 1600 RPM, HEAVY WEIGHT, ABOVE 1500 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 184-4987 184-4989 184-4988 184-4990 197-3994 197-3995 bad file 198-0236 198-0237 25-29 207-3614 207-3615 30-37 latest 224-3078 224-3079 46 1600 RPM, HEAVY WEIGHT, BELOW 1410 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3064 185-3066 185-3065 185-3067 197-3885 197-3886 209-8277 209-8778 latest 224-3087 224-3088 46 1800 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-6138 149-6140 149-6139 149-6141 153-1054 153-1056 153-1055 153-1057 2 173-9618 173-9620 173-9619 173-9621 16 176-6012 176-6014 176-6013 176-6015 17-21 205-6923 205-6924 25-37 latest 224-3091 224-3092 46 1800 RPM, HEAVY WEIGHT, EMISSIONS Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1800 RPM, HEAVY WEIGHT, ABOVE 1500 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3068 185-3070 185-3069 185-3071 205-1543 205-1544 25-37 latest 230-5073 230-5074 46 1800 RPM, HEAVY WEIGHT, BELOW 1410 HP, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3072 185-3074 185-3073 185-3075 205-1545 205-1546 25-37 latest 230-5071 230-5072 46 1735 RPM, LIGHT WEIGHT, A RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1785 RPM, LIGHT WEIGHT, B RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 146-6801 146-6803 146-6802 146-6804 151-7175 151-7177 151-7176 151-7178 2 159-8822 159-8824 159-8823 159-8825 8 169-2603 169-2605 169-2604 169-2606 16 176-6008 176-6010 176-6009 176-6011 17-21 205-6979 205-6980 25-37 latest 226-2346 226-2347 46 1785 RPM, LIGHT WEIGHT, B RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3080 185-3082 185-3081 185-3083 205-1563 205-1564 25-37 latest 230-5081 230-5082 46 1835 RPM, LIGHT WEIGHT, C RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 156-3696 156-3698 156-3697 156-3699 168-8354 168-8356 168-8355 168-8357 15, 16 176-6024 176-6026 176-6025 176-6028 18,19,20,21 latest 205-6931 205-6932 25-37 latest 226-2348 226-2349 46 1835 RPM, LIGHT WEIGHT, C RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3084 185-3086 185-3085 185-3087 205-1565 205-1566 25-37 latest 231-4999 231-5000 46 1880 RPM, LIGHT WEIGHT, D RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 163-6374 163-6376 163-6375 163-6375 168-6549 168-6551 168-6550 168-6552 15, 16 173-2897 173-2899 173-2898 173-2900 17 176-6028 176-6030 176-6029 176-6031 18,19,20,21 205-6929 205-6930 25-37 latest 226-2350 226-2351 46 1880 RPM, LIGHT WEIGHT, D RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3076 185-3078 185-3077 185-3079 205-1561 205-1562 25-37 latest 231-4997 2312-4998 46 1925 RPM, LIGHT WEIGHT, E RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 153-1058 153-1060 153-1059 153-1061 171-5652 171-5654 171-5653 171-5655 17 176-6032 176-6034 176-6033 176-6035 18,19,20,21 205-6927 205-6928 25-37 latest 226-2352 226-2353 46 1925 RPM, LIGHT WEIGHT, E RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 183-2266 183-2268 183-2267 183-2269 205-1559 205-1560 25-37 latest 231-4362 231-4363 46 1600 RPM, HEAVY WEIGHT, LO BSFC (Special - POWER LIMITED) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 158-6604 158-6606 158-6605 158-6607 ******************************************************************************** 3516B MARINE PROPULSION ******************************************************************************** 900 RPM, Heavy Weight, Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 179-9319 latest 226-2369 226-2370 46 1600 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 148-3655 148-3657 148-3656 148-3658 151-7137 151-7139 151-7138 151-7140 2 162-8192 162-8194 162-8193 162-8195 13 168-1985 168-1987 168-1986 168-1988 15, 16 173-2873 173-2875 173-2874 173-2876 17 176-6056 176-6058 176-6057 176-6059 18-21 196-3687 196-3688 25-29 latest 226-2361 226-2362 46 1600 RPM, HEAVY WEIGHT, EMISSIONS Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 165-1623 165-1625 165-1624 165-1626 15, 16 168-1993 168-1995 168-1994 168-1996 173-2881 173-2883 173-2882 173-2884 17 176-6064 176-6066 176-6065 176-6067 18-21 latest 205-1595 205-1596 25-37 1600 RPM, HEAVY WEIGHT, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 168-1989 168-1990 176-6060 176-6061 183-4073 183-4075 183-4074 183-4076 205-1535 205-1536 25-37 224-3089 224-3090 46 latest 251-3187 251-3188 48 1800 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-0319 149-0321 149-0320 149-0322 149-1991 149-1993 149-1992 149-1994 1 151-7133 151-7135 151-7134 151-7136 2 176-6092 176-6094 176-6093 176-6095 18,19,20,21 205-1593 205-1594 25-37 latest 226-2363 226-2364 46 1800 RPM, HEAVY WEIGHT, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3092 185-3094 185-3093 185-3095 205-1531 205-1532 25-37 latest 230-5079 230-5080 46 1800 RPM, HEAVY WEIGHT, EMISSIONS (SPECIAL) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 162-5343 162-5345 162-5344 162-5346 168-2223 168-2225 168-2224 168-2226 15, 16 173-2869 173-2871 173-2870 173-2872 17 latest 176-6088 176-6090 176-6089 176-6091 18,19,20,21 1735 RPM, LIGHT WEIGHT, A RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1785 RPM, LIGHT WEIGHT, B RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3108 185-3110 185-3109 185-3111 204-2510 N/a 204-2511 N/A 25-37 latest 232-2633 N/A 232-2634 N/A 46 1835 RPM, LIGHT WEIGHT, C RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 155-1727 155-1729 155-1728 155-1730 169-2589 169-2591 169-2590 169-2592 176-6100 176-6102 176-6101 176-6103 18,19,20,21 205-6921 205-6922 25-37 latest 226-2365 226-2366 46 1835 RPM, LIGHT WEIGHT, C RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3112 185-3114 185-3113 185-3115 207-3611 207-3612 25-37 latest 230-9539 230-9540 46 1880 RPM, LIGHT WEIGHT, D RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-0323 149-0325 149-0324 149-0326 151-7162 151-7164 151-7163 151-7165 2 176-6104 176-6106 176-6105 176-6107 18,19,20,21 205-6921 205-6922 25-37 latest 226-2367 226-2368 1880 RPM, LIGHT WEIGHT, D RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3100 185-3102 185-3101 185-3103 205-1541 205-1541 25-37 latest 230-9537 230-9538 46 1925 RPM, LIGHT WEIGHT, E RATING Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 157-3690 157-3692 157-3691 157-3693 168-2229 168-2231 168-2230 168-2232 15, 16 174-5187 174-5189 174-5188 171-5190 17 176-6108 176-6110 176-6109 176-6111 18,19,20,21 205-1599 205-1600 25-37 latest 230-5083 230-5084 46 1925 RPM, LIGHT WEIGHT, E RATING, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3104 185-3106 185-3105 185-3107 205-1539 205-1540 25-37 latest 230-9535 230-9536 46 900 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 1200 RPM, HEAVY WEIGHT, LO BSFC, JWAC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 153-3042 152-3044 153-3043 153-3045 155-1737 155-1739 155-1738 155-1740 3 168-1997 168-1999 168-1998 168-2000 15, 16 173-2933 173-2935 173-2934 173-2936 17 176-6052 176-6054 176-6053 176-6055 18-21 197-0569 197-0570 25-29 latest 226-2359 226-2360 46 1200 RPM, HEAVY WEIGHT, IMO CERT Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 185-3088 185-3090 185-3089 185-3091 205-1537 205-1538 25-37 latest 231-5001 231-5002 46 1785 RPM, HEAVY WEIGHT, LO BSFC (Special) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 148-3649 148-3651 148-3650 148-3652 151-7146 151-7148 151-7147 151-7149 2 176-6080 176-6082 176-6081 176-6083 18,19,20,21 213-9326 213-9327 latest 227-4853 227-4854 1600/1800 RPM, HEAVY WEIGHT, LO BSFC (Special) Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 149-6156 149-6158 149-6157 149-6159 latest 151-7150 151-7152 151-7151 151-7153 2 1700 RPM, HEAVY WEIGHT, LO BSFC Primary Chip Backup Chip Reason Flash Part No. Version Flash Part No. Version 146-6462 146-6464 146-6463 146-6465 151-7142 151-7144 151-7143 151-7145 2 3500B Commercial Engine (Built > 4/97) FLASH File Cross-Reference
Updated 3/08/2002
latest 176-6076 176-6078 176-6077 176-6079 18,19,20,21

*******************************************************************************

3508B PETROLEUM
********************************************************************************

60 HZ, 1200 RPM, PRIME, LO BSFC, JWAC
Flash Part No. Chip Version Reason
155-1749 155-1750
latest 178-9617 178-9618 18-22

60 HZ, 1200 RPM, EPA CERT (LAND Electric Drive)
Flash Part No. Chip Version
185-2987 185-2988
205-6965
231-4364 46
latest 251-3198 63

60 HZ, 1200 RPM DITA JWAC (LAND ELEC ENG) MUD PUMPER “SPECIAL”
Flash Part No. Chip Version Reason
196-3684 NA
220-2133 25

60 HZ, 1200 RPM, EPA CERT (LAND Mech. Drive)
Flash Part No. Chip Version
197-3957
213-9329
251-3186 57
272-2472 67
latest 292-7983 68

********************************************************************************

3512B PETROLEUM
********************************************************************************

60 HZ, 1200 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC
Flash Part No. Chip Version Reason
154-8115 154-8116
180-1730 180-1731 18-22
208-6650 NA 25-33,37
Latest 228-5162 46

60 HZ, 1200 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC
Flash Part No. Chip Version Reason
154-8111 154-8112 10
161-8026 161-8027 11
180-2994 180-2995 16,18,21-24
latest 230-9546 46

60 HZ, 1200 RPM, EPA CERT (Land) Reason
Flash Part No. Chip Version
193-3285
212-4405
231-5010 46
latest 348-0207 64

60 HZ, 1200 RPM, EPA/IMO CERT (OS)
Flash Part No. Chip Version Reason
193-3284
212-4404
latest 236-2280 47

********************************************************************************

3516B PETROLEUM
********************************************************************************

60 HZ, 1200 RPM, CONTINUOUS/PRIME, LO BSFC, JWAC
Flash Part No. Chip Version Reason
153-3023 153-3024
153-3047 153-3048 3
latest 178-9164 178-9165 18-22

60 HZ, 1200 RPM, EPA CERT (LAND)
Flash Part No. Chip Version
185-3017 185-3018
209-9737
213-9333
latest 231-5003 46

60 HZ, 1200 RPM, EPA/IMO CERT (OS)
Flash Part No. Chip Version
185-3019 185-3020
212-4403
Latest 237-5235 46

********************************************************************************

3512B OIL WELL SERVICE (now w/high 1920 idle)
********************************************************************************

1900 RPM, EPA CERT
Flash Part No. Chip Version Reason
177-2384 177-2385
192-3721
205-6958
212-4411 N/A 39
215-5820 N/A 41, 44
224-3067 N/A 50
Latest 246-7398 N/A 48

********************************************************************************

3512B OIL WELL SERVICE (now w/high 1950 idle) Halliburton
********************************************************************************

1900 RPM, EPA CERT
Flash Part No. Chip Version Reason
177-2384 177-2385
205-6958 N/A
213-9330 N/A 40
215-5810 N/A 34,41,42
Latest 245-0546 N/A 54

********************************************************************************

3508B LOCOMOTIVE
********************************************************************************

3508B 1500 RPM
Flash Part No. Chip Version Reason
174-2225 174-2226
174-3596 174-3597 8,16,18
207-3608 NA
latest 249-1801 NA 56

3508B 1573 RPM
Flash Part No. Chip Version Reason
161-8032 161-8033
183-9515 183-9516 16,18
latest 207-3609

3508B 1800 RPM
Flash Part No. Chip Version Reason
168-1983 168-1984
183-9517 183-9518 16,18
latest 205-7011

3508B 1800 RPM DIESEL ELECTRIC LOCOMOTIVE
Flash Part No. Reason
Latest 261-8311

3508B 1350 RPM LOCOMOTIVE ENGINE
Flash Part No. Reason
Latest 255-9303

********************************************************************************

3512B LOCOMOTIVE (STANDARD)
********************************************************************************

3512B 1500 RPM, LO BSFC, HIGH IDLE = 1620 RPM
Flash Part No. Chip Version Reason
150-8476 150-8477
151-7190 151-7191 11
184-0800 184-0801 16,18
latest 205-7012

3512B 1500 RPM, EMISSIONS
Flash Part No. Chip Version Reason
164-4519 164-4520
171-5656 171-5657 8
183-9562 183-9563 16,18
205-7013
215-5821 43
224-3074 61
Latest 261-8313 49

3512B 1500 RPM, LO BSFC, HIGH IDLE = 1500 RPM
Flash Part No. Chip Version Reason
164-2042 164-2043
184-0802 184-0803 16,18
latest 205-7014

3512B 1660 RPM, EMISSIONS
Flash Part No. Chip Version Reason
175-5356 175-5357
183-9564 183-9565 16,18
latest 205-7015

3512B 1750 RPM, EMISSIONS
Flash Part No. Chip Version Reason
242-5339 N/A
latest 251-3190 N/A 56

3512B 1800 RPM, EMISSIONS
Flash Part No. Chip Version
175-5358 175-5359
latest 205-7010

3512B 1800 RPM, EPG, EMISSIONS Reason
Flash Part No. Chip Version
208-6646
237-5244 60
242-5340 61
Latest 266-2770 62

3512B 1800 RPM, SPECIAL
Flash Part No. Chip Version Reason
167-0593 167-0594
171-5668 171-5669
183-9566 183-9567 16,18
188-7228
latest 205-7016

********************************************************************************

3512B LOCOMOTIVE (EMD)
********************************************************************************

3512B 1800 RPM
Flash Part No. Chip Version Reason
200-7860 NA
215-5824 NA
Latest 236-2277 49

********************************************************************************

3516B LOCOMOTIVE (STANDARD)
********************************************************************************

3516B 1800 RPM
Flash Part No. Chip Version
174-7093 174-7094
latest 205-7017

********************************************************************************

3516B LOCOMOTIVE (EMD)
********************************************************************************

3516B 1800 RPM
Flash Part No. Chip Version
200-7863 NA
215-5825 NA
Latest 236-2276 49

********************************************************************************
3508B Industrial
********************************************************************************

3508B 1800 RPM, EMISSIONS
Flash Part No. Chip Version Reason
Latest 205-6955

********************************************************************************

3512B Industrial
********************************************************************************

3512B 1800 RPM, EMISSIONS
Flash Part No. Chip Version Reason
Latest 205-6956

********************************************************************************

3516B Industrial
********************************************************************************

3516B 1800 RPM, EMISSIONS
Flash Part No. Chip Version Reason
205-6957
Latest 234-0288 NA 45
================================================================================
3500B HD (High Displacement) Commercial Engine FLASH File Cross-Reference
Updated 17Nov2005

Use this document for 3500B HD (High Displacement) engines
with the following serial number prefixes.

EPG MARINE PROPULSION
2JW 4BW
5AW 2EZ

NOTE: Software information for 3500B (Standard Displacement)
engines can be found in the “3500B Commercial Engine (Built >
4/97) FLASH File Cross-Reference” or the “3500B Commercial Engine
(Built < 4/97) FLASH File Cross-Reference." Software information for 3500 with EUI Option Commercial Engine FLASH files is listed in the cross reference entitled "3500 with EUI Option Commercial Engine FLASH File Cross-Reference." **************************************************************** Notes for Using This Document **************************************************************** Latest software services 3500B HD engines back to first production. Software is listed by application then number of cylinders. All engines are SCAC (Separate Circuit After Cooled) unless specified. Part numbers listed under the "Flash Part No." column are flash file numbers. These are software numbers that can be downloaded from the Caterpillar mailbox or SISWeb or copied from the SIS Flash Files CD. These numbers can not be ordered from the parts distribution system. Flash files must be used when updating software electronically using Winflash. A part number listed under the "Service Replacement" column is the part number of the removable chip inside the ECM that contains the flash file software listed in the same row in the table. These "chips" are made available for a very small percentage of service locations that do not have flash capability. These parts must be ordered from the parts distribution system and physically installed in the ECM using the access cover. Most dealers will never order chips from the service replacement column. The flash method of updating software described in the paragraph above is the preferred method. **************************************************************** Reasons for software change: **************************************************************** 1. Fix for intermittent EMSII "!Stop" light flashing. See 15 July 1998 TIB entitled "Intermittent Engine Monitoring System (EMS) "!Stop" Light Flashing On Marine Propulsion Engines." 2. Fix for Engine Vision Display Error. A negative crankcase pressure value would cause Engine Vision to display "Error". The new software eliminates this problem. 3. Fix for erroneous logging of high crankcase pressure events. New software has improved software filtering of crankcase pressure sensor raw data to stabilize readings and eliminate false event logging. 4. A change was made to the 94-02 and 289-02 fuel pressure sensor misinstalled diagnostic strategies to reduce false logging. The diagnostics will no longer activate below 200 RPM. Electronic filtering was also added to the software for the fuel pressure signals for more stable readings. A March 17, 1999 TIB will also help to properly identify the filtered and unfiltered fuel pressure sensor ports. 5. Solution to EMSII 248-02 code and light flashing issue mentioned in Jan 28, 1998 TIB. This issue only affects Marine Propulsion applications equipped with Pilothouse panels. 6. Improved inlet air restriction and oil pressure monitoring. This should help to reduce false high inlet air restriction warnings. 7. Software added dedicated low idle switch input (J1-P26)to ECM. Earlier EPG engines with switchgear conversion panels (Electronic Instrument Panels) would activate a 91-08 Speed Control Output Signal Is Abnormal diagnostic when the low idle switch was activated. The diagnostic became active because the switch was wired in-line with the PWM speed control signal. When a 91-08 diagnostic is active the ECM defaults to low idle so the switch has the intended effect. However, the active diagnostic created problems with certain electronic monitoring systems. The new dedicated low idle switch ECM input allows the switch to request low idle speed without opening the speed control signal and activating the 91-08 diagnostic. This feature can be utilized on all previous 3500B EPG engines by rewiring the low idle switch. The engine uses the speed control signal to determine desired speed when ECM J1-P26 is open. Low idle becomes the desired speed when J1-P26 is grounded. If the switch wiring is not changed when the new software is flashed, the low idle switch will continue to operate as it always has - activating the 91-08 diagnostic. This feature applies to EPG and Marine Auxiliary applications only. 8. Improved 94-02 and 289-02 fuel pressure sensor misinstalled diagnostic strategy. The previous change in reason code 18 was only partially successful. The new strategy increases the amount of negative fuel pressure differential required to log the misinstalled codes from -15 kPa to -70 kPa. In addition, the absolute value of the fuel filter differential pressure is now used for display purposes and event logging. This will allow the ECM to monitor differential pressure even if the sensors are installed backward. 9. The percent load calculation has been changed to more accurately reflect engine load. The new percent load calculation also effects the Load Feedback signal ECM output. Be certain to verify that the new software strategy will not adversely effect vessel control systems that utilize this output before flashing the ECM with the new software. 10. The Low Coolant Temperature warning strategy has been improved. This strategy has been improved to reduce low coolant temperature warnings when the engine is lightly loaded. The strategy now uses engine load as well as coolant temperature to determine if the engine is being over cooled. A new Coolant Warning Engine Load Enable Threshold parameter has been added to support this feature. This parameter label will be used in forthcoming versions of Cat ET. Until then the parameter will show up as Load Warning Set. 11. FLS/FTS power adjustment added. Factory level passwords are required to change FLS and FTS. FLS and FTS may be programmed without passwords once on a new (blank) ECM. This occurs when the tattletale is zero. Cat ET Version 3.2 or later is required to program FLS/FTS. 12. The monitoring system is now disabled when engine speed is zero. It was previously possible for the monitoring system to activate an alarm with no engine speed. This resulted in nuisance alarms in applications where the electrical system is left powered up when the engine is not running. 13. Programmable governor gains added. Engine ECM governor gains may be adjusted if the default gain factors do not provide satisfactory system response characteristics. Default governor gain settings are recommended for almost all applications. If changing gain parameters refer to Special Instruction form REHS1109. 14. Rated Fuel Default to Minimum. When replacing a failed ECM the rated fuel limit parameter will now default to a minimum value. The parameter will need to be programmed after the correct value has been obtained from TMI. Previously, the rated fuel limit parameter defaulted to a maximum value and engine damage could occur if it was not properly programed following an ECM replacement. 15. Altitude derate annunciation supression on EMSII. Altitude derate causes the EMSII "!Stop" light to flash. Many customers knowingly operate in derate mode and the continuous light flashing is a nuisance and may disguise a new diagnostic. For this reason, altitude derate will now cause the EMSII "!Stop" light to flash for 15 seconds. After 15 seconds the light will stop flashing. The derate is still active and can be viewed with Cat ET. Only the annunication of the derate has changed. 16. Minimum oil pressure map for low oil pressure warnings is now 69 kPa at low engine speeds. This value was increased to provide added protection to turbochargers. 17. General alarm relay feature updated. The general alarm relay will now activate for low fuel level and low coolant level. These two conditions did not previously activate the general alarm relay. 18. Injector E-Trim feature has been updated. A 1495-02 "Injector Trim Not Prog" diagnostic code will activate if the injector trim calibration codes have not been entered. Previously the injector trim codes defaulted to 1100 (no adjustment) and no diagnostic was present. The 1495-02 diagnostic will activate when updating software on existing engines containing injectors that do not have trim codes. To fix the problem, go the calibration screen in Cat ET and reprogram all of the codes to 1100. If the injectors in the engine DO have trim codes program those trim codes into Cat ET. 19. Torque Limit feature added. Programmable parameter allows engine torque to be limited. Parameter may be programmed to a value between torque at rated speed and peak torque. 20. Software change to be used with 130 degree spray pattern injectors. 21. Allows changes to the configuration with in the first 100 hrs. with a password. 22. 1495-02 (injector E-trim code not programmed) fix. 23. Change to smoke and torque map. 24. Added adjustable gains 25. Revised default governor gains to fix problem with adjustable gains. 26. Updated torque maps 27. Updated template to provide 3 miniute delay on oil pressure at cold startup 28. Updated the 94-11 code (fuel pressure dropped below 320 kpa for more than 20 sec. *************************************************************** 3512B HIGH DISPLACEMENT GENSET APPLICATION *************************************************************** 50 HZ, 1500 RPM, PRIME/STANDBY, LO BSFC Flash Part No. Service Replacement Reason 156-9266 156-9267 latest 178-4420 178-4421 3,4,6,7 60 HZ, 1200 RPM, CONT/PRIME/PRIME+10, EPA CERT Flash Part No. Service Replacement Reason latest 185-2959 185-2960 60 HZ, 1800 RPM, PRIME/STANDBY, LO BSFC Flash Part No. Service Replacement Reason 156-3696 156-3697 latest 178-4422 178-4423 3,4,6,7 60 HZ, 1800 RPM, PRIME/STANDBY, EPA CERT Flash Part No. Service Replacement Reason latest 185-2961 185-2962 *************************************************************** 3516B HIGH DISPLACEMENT GENSET APPLICATION *************************************************************** 50 HZ, 1500 RPM, PRIME/STANDBY, LO BSFC (With 155-0727 injector) Flash Part No. Service Replacement Reason 156-9264 156-9265 178-4330 178-4331 3,4,6,7 201-1681 209-9738 8-18 228-5177 22 255-9314 27 Latest 271-0373 28 50 HZ, 1500 RPM, PRIME/STANDBY, LO BSFC (With 159-8832 injector) Flash Part No. Service Replacement Reason 195-0969 NA 20 201-1677 NA 8-18 205-6978 NA 21 228-5173 NA 22 237-5243 NA 237-5248 NA 23 255-9315 NA 27 Latest 271-0366 28 50 HZ, 1500 RPM, PRIME+10, EMISSIONS Flash Part No. Service Replacement Reason 174-7101 174-7102 197-0556 205-7008 8-18 228-5174 22 255-9312 27 Latest 271-0375 28 50 HZ, 1500 RPM, EMISSIONS Flash Part No. Service Replacement Reason 197-0556 205-7008 8-18 228-5174 22 Latest 255-9312 59 50 HZ, 1500 RPM, STANDBY, EMISSIONS Flash Part No. Service Replacement Reason 208-6653 255-9311 27 Latest 271-0376 28 60 HZ, 1200 RPM, CONT/PRIME/P+10, EPA CERT Flash Part No. Service Replacement Reason 185-2965 185-2966 203-9240 8-18 228-5175 22 255-9313 27 Latest 271-0374 28 60 HZ, 1800 RPM, PRIME/STANDBY, LO BSFC Flash Part No. Service Replacement Reason 161-1801 161-1802 latest 178-4540 178-4541 3,4,6,7 60 HZ, 1800 RPM, CONT/PRIME/P+10, EPA CERT Flash Part No. Service Replacement Reason Latest 185-2967 185-2968 *************************************************************** 3512B HIGH DISPLACEMENT LOCOMOTIVE APPLICATION *************************************************************** 60HZ, 1800 RPM, LOW EMISSIONS Flash Part No. Service Replacement Reason 215-5803 NA 245-0556 NA 24 Latest 249-1809 NA 25 *************************************************************** 3516B HIGH DISPLACEMENT LOCOMOTIVE APPLICATION *************************************************************** 60HZ, 1800 RPM, LOW EMISSIONS Flash Part No. Service Replacement Reason 190-0084 NA 237-5249 NA 24 Latest 246-7397 NA 25 *************************************************************** 3512B HIGH DISPLACEMENT MARINE PROPULSION APPLICATION *************************************************************** 1600 RPM, HEAVY WEIGHT, IMO CERT Primary Service Backup Service Reason Flash Part No. Replacement Flash Part No. Replacement 184-6996 184-6998 184-6997 184-6999 205-1547 205-1548 8-19 224-3083 224-3084 22 Latest 242-5341 242-5342 26 1600 RPM, LIGHT WEIGHT, IMO CERT Primary Service Backup Service Reason Flash Part No. Replacement Flash Part No. Replacement latest 185-2981 185-2983 185-2982 185-2984 *************************************************************** 3516B HIGH DISPLACEMENT MARINE PROPULSION APPLICATION *************************************************************** 1600 RPM, HEAVY WEIGHT Primary Service Backup Service Reason Flash Part No. Replacement Flash Part No. Replacement 168-1989 168-1991 168-1990 168-1992 176-6060 176-6062 176-6061 176-6063 1-6 Latest 227-4855 228-4856 22 1600 RPM, HEAVY WEIGHT, IMO CERT Primary Service Backup Service Reason Flash Part No. Replacement Flash Part No. Replacement 185-3096 185-3098 185-3097 185-3099 205-1533 205-1534 8-19 Latest 224-3076 224-3077 22 ================================================================================ 3500B Machine Engine FLASH file Cross Reference Updated 6/28/01 Software is listed by machine model. Section 1 shows personality module change history. Section 2 shows the reasons why the software was changed. ********************************************* Section 1 - Personality Module Change History ********************************************* 793C Off Highway Truck 3516B Engine Flash Part No. Service Replacement 132-6459 132-6461 146-9358 146-9360 152-7245 152-2746 158-7601 158-7602 168-8620 168-8621 179-4966 179-4967 179-8320 179-8321 latest 200-0826 200-0827 793C HD Off Highway Truck Tier I Certified Flash Part No. Service Replacement 161-8916 161-8917 194-9640 194-9641 196-7335 196-7336 198-0189 198-0190 latest 199-4441 199-4442 793C Off Highway Truck High Altitude 3516B Engine Flash Part No. Service Replacement 168-8607 168-8608 169-6262 169-6263 185-6730 185-6731 191-9406 191-9407 latest 200-0828 200-0829 789C Off Highway Truck Flash Part No. Service Replacement 136-1581 136-1583 187-1256 187-1257 latest 206-2522 206-2523 789C Off Highway Truck Tier I Certified Flash Part No. Service Replacement 161-8016 161-8017 latest 206-2531 206-2532 785C Off Highway Truck Flash Part No. Service Replacement 136-1577 136-1579 194-6588 194-6589 latest 206-2522 206-2523 785C Off Highway Truck Tier I Certified Flash Part No. Service Replacement 161-8014 161-8015 206-2526 206-2527 latest 211-0578 785C Off Highway Truck High Altitude Flash Part No. Service Replacement 151-1311 151-1312 151-7064 151-7065 206-2524 206-2525 latest 211-1857 776D Tractor, 777D Off Highway Truck (Model RM561) 3508B Engine Flash Part No. Service Replacement 132-6455 132-6457 142-0378 142-0380 151-2155 151-2157 158-2234 158-2235 176-0065 176-0066 latest 194-6596 194-6597 777D Off Highway Truck(Model RM636) Flash Part No. Service Replacement 184-8016 184-8016 777D Off Highway Truck Tier I Certified Flash Part No. Service Replacement 166-0943 166-0943 185-8623 185-8624 188-2771 188-2771 latest 195-6427 195-6428 777D Off Highway Truck - High Altitude 3512B Engine Flash Part No. Service Replacement 134-3946 134-3948 175-6461 175-6462 latest 185-3602 185-3603 992G Wheel-Type Loader 3508B Engine Flash Part No. Service Replacement 139-6027 139-6029 146-9370 146-9372 150-1194 150-1196 163-7212 163-7213 175-3317 175-3318 193-4245 193-4246 193-7131 193-7132 latest 205-4658 205-4659 D11R 9TR1-Up Tractor 3508B Engine Flash Part No. Service Replacement 136-9332 136-9334 148-6513 148-6515 149-8181 149-8183 161-8000 161-8003 165-5026 165-5027 167-0750 167-0751 175-6453 175-6454 178-2661 178-2662 latest 200-0084 200-0085 5130B 4CS1-Up Excavator 3508B Engine Flash Part No. Service Replacement 141-6732 141-6735 146-5703 146-5705 159-5221 159-5222 168-4416 168-4417 180-9126 180-9127 186-3141 186-3141 latest 199-1174 199-1175 5130B 4CS1-Up Excavator Tier I Certified Flash Part No. Service Replacement 151-7083 151-7084 latest 192-1896 192-1897 ************************************************** Section 2 - Reasons for Personality Module Changes ************************************************** 793C Changes: From 146-9358 to 152-7245: 1. Hybrid engine 2. 40% initial current for wastegate 3. Learned wastegate current stored in battery backed RAM 4. 2200 RPM overspeed 5. Low boost warning set to 19.2mm-25mm rack 6. High boost warning set to 17mm-25mm rack 7. Learned speed set to 1350-1750 RPM 8. Low and high boost warning derate to 20% 9. 100 rpm below low idle cold cylinder cutout for kickout 10. No event for negative crankcase pressure 11. Engine speed check for loss of coolant flow 12. Reduce learning time from 30 to 20 seconds 13. New fuel rate map 14. New area map 15. Shutter control 16. Support added for Oil Renewal System (ORS) From 152-7245 to 158-7601: 1. Addition of 1.0% oil burn feature 2. 2200 RPM engine overspeed 3. Pre-lube trip point set to 3kPa, 17 seconds From 158-7601 to 168-8620: 1. Added body up lean smoke made for neutral gear 2. Added selectable throttle (default to 75%-90% high throttle limits) 3. Removed Oil Renewal System 4. Changed crank case filter factor to 25 PIR 5. Changed engine coolant flow switch debounce from 2 to 10 seconds 6. Changed prelube map (increased kickout time from 15 to 17 seconds and reduced pressure kickout to 3kPa) PIR CMT-98-02 From 168-8620 to 179-4966: 1. New timing map 2. Increased wastegate derate from 20% to 30% 3. Timing changes to 4 ?during high boost event and engine speed > 1200 rpm
4. Wastegate driver preset at 28% (41 bits or 0.56 Amp)
5. Extended wastegate governed region, new range is
1275 to 1800 rpm
6. Engine load check for wastegate is now load > 35%
rather than load > 50%
7. Debounce on the oil level switch is now 3 seconds set
and 0.5 second to reset
8. Debounce on the coolant level switch is now 3 seconds
to set and 0.5 second to reset

From 179-4966 to 179-8320:
1. Support for Oil Renewal System
2. New torque maps

From 179-8320 to 200-0826:
1. Support for True Weight Speed Manager – Keeps
transmission from switching gears constantly when
weight is being changed.

793C HD Tier I Certified Changes:
From 161-8916 to 194-9640
1. Support for True Weight Speed Manager – Keeps
transmission from switching gears constantly when
weight is being changed.
2. Support for coolant flow switch

From 194-9640 to 196-7335:
1. New Advance on Acceleration timing map to improve engine
performance
2. New High Altitude Advance on Acceleration timing map to
improve engine performance

From 196-7335 to 198-0189:
1. Support for Muli- Torque/ DualHP strategy
2. Support for lower case transmission serial numbers
3. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
4. Modified low oil pressure event map (lowered to 69 kPa)
to meet 3500B Basic Engine Requirement and protect turbo
chargers

From 198-0189 to 199-4441
1. Support for Oil Renewal System

793C High Altitude Changes:
From 168-8607 to 169-6262:
1. Negative timing support
2. Analog inputs are filtered and initialized except TOT
3. Dyno mode – Feature simplifies dyno testing of electronic engines.
Certain diagnostic codes caused by removing the engine from chassis
are ignored. Desired engine may be entered through Cat ET. This
eliminates the need to connect a throttle position sensor to the
engine during testing. This feature require up to date version of
Cat ET.
4. Test cell throttle support
5. Exhaust derate increments 2% every 15 seconds
CMT requested feature changes Jul1999

From 169-6262 to 185-6730:
1. Increased wastegate derate from 20% to 30%
2. Timing changes to 4 ?during high boost event and
engine speed > 1200 rpm
3. Wastegate driver preset at 28% (41 bits or 0.56 Amp)
4. Extended wastegate governed region, new range is
1275 to 1800 rpm
5. Engine load check for wastegate is now load > 35%
rather than load > 50%
6. Debounce on the oil level switch is now 3 seconds set
and 0.5 second to reset
7. Debounce on the coolant level switch is now 3 seconds
to set and 0.5 second to reset

From 185-6730 to 191-9406:
1. Support for Oil Renewal System

From 191-9406 to 200-0828:
1. Added to feature True Weight Speed Manager – Keeps transmission
from switching gears constantly when weight is being changed.

789C Changes:
From 136-1581 to 187-1256:
1. New torque map
2. New timing map

From 187-1256 to 206-2528:
1. Support for TWSM – Keeps transmission from switching
gears constantly when weight is being changed.
2. 10 second debounce on air filter restriction derate
3. Modified low oil pressure event map to meet 3500B
Basic Engine Requirement
4. FTS Programming
5. FLS/ FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
6. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
7. E- Trim diagnostics were added to meet 3500B Basic
Engine Requirement
8. Testcell Throttle
9. Dyno Mode – Feature simplifies dyno testing of electronic
engines. Certain diagnostic codes caused by removing the
engine from chassis are ignored. Desired engine speed may
be entered through Cat ET. This eliminates the need to
connect a throttle position sensor to the engine during
testing. This feature requires up to date version of Cat ET.

789C Tier I Certified Changes:
From 161-8016 to 206-2531:
1. Support for TWSM – Keeps transmission from switching gears
constantly when weight is being changed.
2. 10 second debounce on air filter restriction derate
3. Modified low oil pressure event map to meet 3500B
Basic Engine Requirement
4. FLS/ FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
5. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
6. E- Trim diagnostics were added to meet 3500B Basic
Engine Requirement

785C Changes:
From 136-1577 to 194-6588
1. New 12 degree Master Timing map

From 194-6588 to 206-2522:
1. Support for TWSM – Keeps transmission from switching gears
constantly when weight is being changed.
2. 10 second debounce on air filter restriction derate. Reduces
false logging of high air filter rest events.
3. Modified low oil pressure event map to meet 3500B
Basic Engine Requirement
4. FTS Programming
5. FLS/ FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
6. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
7. E- Trim diagnostics were added to meet 3500B Basic
Engine Requirement
8. Testcell Throttle
9. Dyno Mode – Feature simplifies dyno testing of electronic engines.
Certain diagnostic codes caused by removing the engine from chassis
are ignored. Desired engine speed may be entered through Cat ET.
This eliminates the need to connect a throttle position sensor to the
engine during testing. This feature requires up to date version of
Cat Et.

785C Tier I Certified Changes:
From 161-8014 to 206-2526:
1. Support for TWSM – Keeps transmission from switching gears
constantly when weight is being changed.
2. 10 second debounce on air filter restriction derate. Reduces
false logging of high air filter rest events.
3. Modified low oil pressure event map to meet 3500B
Basic Engine Requirement
4. FLS/ FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
5. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
6. E- Trim diagnostics were added to meet 3500B Basic
Engine Requirement

From 206-2526 to 211-0578:
1. Added support for Oil Renewal System (ORS)

785C High Altitude Changes:
From 151-1311 to 151-7064:
1. New torque map
2. New timing map

From 151-7064 to 206-2524:
1. Support for TWSM – Keeps transmission form switching gears
constantly when weight is being changed.
2. 10 second debounce on air filter restriction derate. Reduces
false logging of high air filter rest events.
3. Modified low oil pressure event map to meet 3500B
Basic Engine Requirement
4. FTS Programming
5. FLS/ FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
6. 20 hour ‘Free Event Clearing’ which eliminates need for
factory passwords to clear event in the first 20 hours
7. E- Trim diagnostics were added to meet 3500B Basic
Engine Requirement
8. Testcell Throttle
9. Dyno Mode – Feature simplifies dyno testing of electronic engines.
Certain diagnostic coeds caused by removing the engine from chassis
are ignored. Desired engine speed may be entered through Cat ET.
This eliminates the need to connect a throttle position sensor to
the engine during testing. This feature requires up to date version
of Cat ET.

From 206-2524 to 211-0578:
1. Added support for Oil Renewal System (ORS)

776D & 777D (model RM561) Changes:
From 142-0378 to 151-2155:
1. Water cannon throttle lock
2. Pre-lube override and trup points
3. 2100 RPM engine overspeed
4. Fan clutch rampup
5. Zero out hours and fuel
6. PID for engine status
7. No coolant flow event w/ ground level shutdown
8. 2 second debounce for trup
9. E-trim
10. EEprom clearing for interlock mismatch
11. 100 RPM below low idle cold cylinder cutout disable
12. No event for negative crankcase pressure
13. New fuel rate map
14. Altitude derate 0.75%/kPa at 10,000 ft
15. New torque map

From 151-2155 to 158-2234:
1. Added body up lean smoke make for neutral gear
2. Added selectable throttle (default to 40%-50%
high throttle limits)
3. Crank case filter factor to 25 PIR
4. Engine coolant flow switch debounce from 2 to 10 seconds.
Reduces false logging of loss of coolant flow events.
5. Prelube map (kickout time 17 seconds and pressure
kickout 3 kPA)

From 158-2234 to 176-0065:
1. New torque map (1% increase)

From 176-0065 to 194-6596:
1. New torque map timing map to address valve sticking
problem

777D (Model RM636) changes:
Initial Production 184-8016:
1. Added support for Electronic Muffler
2. Set debounce on the oil level switch and coolant level switch to
3s and the reset debounce to 0.5s
3. Negative timing support
4. All analog inputs are filtered and initialized except TOT
5. Throttle Pedal Configuration default to 75%-90%
6. New 12º timing map (addresses valve sticking problem)
7. Add support for FTS programming
8. FLS and FTS default to 0
9. New interlock code

777D Tier I changes:
Initial Production 166-0943:
1. New torque maps
2. New timing map
3. New fuel rate map
4. Max value for the FARC adjustment is 0 instead of 25. Required
for emission certification.
5. Set debounce on the oil level switch and coolant level switch to
3s and the reset debounce to 0.5s
6. Change level in the device ID to $0020
7. Body up smoke
8. Selectable throttle (default to 75-90%)
9. Overspeed raised from 2100 to 2200 RPM
10. Negative timing support
11. All analog inputs are filtered and initialized except TOT
12. Dyno mode support – Feature simplifies dyno testing of electronic
engines. Certain diagnostic codes caused by removing the engine
from the chassis are ignored. Desired engine speed may be entered
through Cat ET. This eliminates the need to connect a throttle
position sensor to the engine during testing. This feature requires
up to date version of Cat ET.
13. Test cell throttle support
14. Exhaust derate increments 2% every 15 seconds

From 166-0943 to 185-8623:
1. New Torque maps

From 185-8623 to 188-2771:
1. New Torque Maps

From 188-2771 to 195-6427:
1. Added support for True Weight Speed Manager – Keeps transmission
from switching gears constantly when weight is being changed.
2. Added support for FTS programming
3. FLS/FTS default to ‘Not Programmed’ on a new ECM. 268-02
code activated until parameter is programmed one time.
4. Added Free Event Clearing which eliminates need for
factory passwords to clear event in the first 20 hours

777D High Altitude Changes:
From 134-3946 to 175-6461:
1. Fixed crank case pressure sensor autocal
2. Added body-up smoke feature
3. Added selectable throttle
4. Added negative timing support
5. Added coolant flow 10 second debounce. Reduces false
logging of loss of coolant flow events.
6. Added filters for all pressure sensors (except TOT)
7. New torque map (1% increase over full range)
8. Raised prelube map to 3 kPa or 17 seconds to avoid prelube
timeout logged diagnostics.
9. Changed tran control diagnostic from CID 248 to 296
10. Fixed Etrim map
11. Fixed torque map parameters in ET
12. Removed throttle lock so engine can’t be locked to one speed

992G Changes:
From 139-6027 to 146-9370:
1. Changed torque map
2. Changed oil pressure scaling in the hardware file.

From 146-9370 to 150-1194:
1. Changed torque map
2. Changed timing map
3. Changed fuel rate map
4. Changed VIMS map

From 150-1194 to 163-7212:
1. Cold cylinder cutout de-activates if engine speed
drops 100 RPM below low idle (was 50 RPM)
2. Added cold cylinder cutout Enable/Disable via
service tool. Default is on.
3. Added cold cylinder cutout status display to Service Tool.
4. Changed crankcase pressure sensor filter to 25 from 225.
This change causes high frequency noise on this signal
to be ignored.
5. Suppress logging crankcase pressure event when crankcase
pressure goes negative.
6. Software written for ADEM II 16 D control. Version C
control not supported. Cat Data Link Flashing is supported
7. Added axle protection derate override in ECAP and
ET version 2.3
8. Coolant flow event is disabled if ground level shutdown
switch causes a shutdown or engine speed is 50 or
more RPM below low idle.
9. Coolant flow status on Service Tool Status Screens
is updated regardless of whether or not engine is running.
Loss of coolant flow event logging still requires
engine to be running.
10. EEprom clearing occurs when a Personality Module
Interlock mismatch code occurs and the interlock code
is cleared via Factory Passwords.
11. Added fuel correction factor programmable parameter to
allow customer to fine-tune engine control’s calculation
of fuel used.
12. Added ability to program hours and total fuel via ET.
13. Added 1.67 degree timing/second ramp when control
switches between warm and cold modes.
14. Added Product ID Programmable Parameter.
15. Disabled logging Event ID 265. User defined shutdown when
implement control requests shutdown over Cat Data Link.
16. Removed Equipment ID from the required list of parameters
needed to be programmed to avoid getting a 268-02 Check
Programmable Parameters diagnostic.

From 163-7212 to 175-3317:
1. New torque map (2% increase)
2. Corrected enable/disable function of cold cylinder cutout
3. Changed filter factors for pressure sensors which affected
auto calibration

From 175-3317 to 193-4245:
1. Master timimng map change

From 193-4245 to 193-7131:
1. New tourque map

From 193-7131 to 205-4658:
1. New torque map
2. New timing map

D11R Changes:
From Experperimental to 136-9332:
1. Add hydraulic retarding strategy.
2. Correct crankcase pressure warning work negative pressures.

From 136-9332 to 148-6513:
1. Add Cat Data Link communications to determine if
implement control is on machine and if the minimum
fan pump pressure should be modified.

From 148-6513 to 149-8181:
1. Added PING for VIDS (using MID $33 instead of $31)
to determine whether to drive “Service Required” and
“High Exhaust Temperature” lamps.
2. Modified smoke map, fuel rate map, timing map and torque map.
3. Added “Ramped Elevated Low Idle”
4. Modified “Service Required” lamp support to enable off of
“fuel filter event” not the switch status as in “apr97” release.

From 149-8181 to 161-8000:
1. Changed the crank case pressure sensor filtering factor to 41%.
2. Changed nominal fan pump pressure from 2900 kPa to 3800 kPa.
3. Disabled Engine lugging from the demand fan control strategy.
4. Added diagnostics for the Overspeed Retarder Solenoid.
5. Increased the coolant flow warning and event debounce to 10 sec.
6. Changed the Cold Cylinder Cutout feature to deactivate for
ten minutes whenever engine speed drops 100 RPM (currently
50 RPM) below low idle.

From 161-8000 to 165-5026:
1. Modified minimum fan pump pressure from 3800 kPa to
1169 kPa for the D11R-B only.
2. Changed the crank case pressure sensor filtering factor
from 41% to 25%.
3. Changed the overspeed retarder solenoid pinging from
180 msec to 120 msec

From 165-5026 to 167-0750:
1. Changed the torque map.
2. Changed the crank case pressure sensor filter factor
from 25% to 10%.
3. Changed the overspeed retarder solenoid pinging from
120 msec to 180 msec.
4. Added check engine (PID $F803) and Service Code (PID $PID $F192)
lamps support for the hydraulic retarder.

From 167-0750 to 175-6453:
1. New torque map (2% increase)
2. Corrected injector E-trim table errors
3. Added 10 second delay to high air filter restriction event

From 175-6453 to 178-2661:
1. Changed the Torque map for new BTL-75 Turbos.
2. Changed the Timing map.
3. Dyno Mode – Feature simplifies dyno testing of electronic engines.
Certain diagnostic codes caused by removing the engine from chassis
are ignored. Desired engine speed may be entered through Cat ET. This
eliminates the need to connect a throttle position sensor to the engine
during testing. This feature requires up to date version of Cat ET.
4. Different minimum on acceleration fan pump pressure for
D11Rb & Carry Dozer

From 178-2661 to 200-0084:
1. New timing map
2. New cold mode elevated idle strategy – Added hysteresis to prevent frequent
changes in engine speed. New stategy remains at constant engine speed
for at least 1 minute regardless of coolant temperature. Engine speed
will remain constant for at least 10 minutes at the lowest speed before
dropping to low idle.

5130B Changes:
From 141-6732 to 146-5703:
1. Add capability to zero out ECM hours.
2. Add capablility to zero out fuel consumed
3. Change exhaust temp from level 1 warning to level 3 warning
after 5 occurances.
4. Add PID to display engine cold cylinder cutout status data on
service tool and VIMS.
5. EEprom clearing on personality module mismatch override
6. Crankcase pressure event should not be logged when pressure
goes negative.
7. Coolant flow event is disabled when ground level or user
defined shutdown is enabled.
8. Coolant flow event is disabled when engine speed is 50 or
more RPM below low idle.
9. Coolant flow event activation debounce time of 2 sec.
Deactivation time of 0.5 sec.

From 146-5703 to 159-5221:
1. Fix user defined shutdown.
2. Fix default values for monitoring system.
3. Perform complete software module test.

From 159-5221 to 168-4416:
1. High altitude software support.
2. Attachment oil renewal system.
3. Attachment ECM controlled prelube system.

From 168-4416 to 180-9126:
1. New torque map to increase power in order to reduce
HP variability seen in LEC test cell
2. New Torque Map Request for 5130B to increase engine
power for power variability problems

From 180-9126 to 186-3141:
1. 5130B Programmable Monitoring System refresh fix. This is the
same type of fix that went into 159-5221, but was not set up
correctly in the next release. If the PMS trigger values become
corrupted, there is no way to refresh them to the defaults with
the current s/w.

From 186-3141 to 199-1174:
1. Change torque map to new KLC map that raises power at rated speed
by 3.4%
2. Change E-Trim map to 3500B baseline map
3. Cool Engine Elevated Idle – Added hysteresis to prevent frequent
changes in engine speed. New stategy remains at constant engine speed
for at least 1 minute regardless of coolant temperature. Engine speed
will remain constant for at least 10 minutes at the lowest speed before
dropping to low idle.
4. Fix Exhaust Temp Derate – 1. Derate % PID does not indicate correct
value when derate is latched 2. Sensor fault does not cause derate
5. 100-13 Engine Oil Pressure Cal Required – needs to be changed to
543-13
6. Fix update on the override screen for Fan Bypass override. The fan speed
was being overridden, but the display on the ET
overrides screen was not updating.
7. Generate a diagnostic code “1495-2” when the E-Trim
codes are set to the default value of 0000 (no correction). E-Trim would
be set on 0000 on a blank/new ECm or when the EEPROM is cleared
with an interlock and application ID mismatch.
8. Change minimum low oil pressure setting to 69 kPa. For
the 5130B applications, the minimum low oil pressure is set to 44 kPa
at 650 RPM and below and ramps up to 250 kPa at 1500 RPM.

5130B Tier I Certified changes:
From original to 151-7083:
1. Change Universal Broadcast timeout for VIMS from 3 tries to 6 tries
2. Include support for Test Cell Throttle PWM input (SRN000029)
3. Fix known problems –
4. Include 2000 Cert maps –
5. New Interlock = 16, per RJL
6. New Fan Control Strategy – incorporate SCAC temp sensor
7. Replace PWM PS Pressure Sensor with Analog PS Pressure Sensor
8. NO PS solenoid change
9. Do NOT remove coolant flow switch
10. Add support for FTS to engine s/w and the ET configuration screen
11. New smoke map with FRC range from -25 to 0

From 151-7083 to 192-1896:
1. Change torque map to new KLC map with lower torque at peak torque to
retarget tourque map.
2. Change E-Trim map to 3500B baseline map
3. Add analog PS Pressure filtering and change Underspeed cal tolerance to
+/- 40 kPa like 5130B HAA
4. Fix Cool Engine Elevated Idle – Added hysteresis to prevent frequent
changes in engine speed. New stategy remains at constant engine speed
for at least 1 minute regardless of coolant temperature. Engine speed
will remain constant for at least 10 minutes at the lowest speed before
dropping to low idle.
5. Fix Exhaust Temp Derate – 1. Derate % PID does not indicate correct
value when derate is latched 2. Sensor faults do not cause derate
6. Default FLS/FTS to “not programmed”
7. Change to Version D software
8. Fix update on the override screen for Fan Bypass override – (library
update). The fan speed was being overridden, but the display on the ET
overrides screen was not updating.
================================================================================
3500B Commercial Engines Equipped with A3 ECM, FLASH File Cross-Reference
Updated July 10, 2006

A3 ECM – A3 ECM – A3 ECM – A3 ECM – A3 ECM – A3 ECM – A3 ECM – A3 ECM

Use this document for 3500B HD (High Displacement) engines
with the following serial number prefixes.

EPG MARINE PROPULSION
2JW 4BW
5AW 2EZ

This software list services engines built after Oct 2003
that have A3 ECM’s. Latest software services these
Serial Numbers back to the first Serial Number listed.

FLASH File Cross-Reference.”

MARINE AUX MARINE PROPULSION
S2A1-UP S2D1-UP
S2B1-UP S2E1-UP
S2G1-UP S2F1-UP
S2H1-UP S2J1-UP
S2P1-UP S2K1-UP
S2R1-UP S2L1-UP
S2M1-UP
S2N1-UP
S2S1-UP
S2T1-UP
S2W1-UP
S2X1-UP
S2Y1-UP

********************************************************************************

Notes for Using This Document
********************************************************************************

Software is listed by application then number of cylinders.

Part numbers listed under the “Flash Part No.” column are
flash file numbers. These are software numbers that can be
downloaded from the Caterpillar mailbox or SISWeb or copied from
the SIS Flash Files CD. These numbers can NOT be ordered from the
parts distribution system. Flash files must be used when updating
software electronically using Winflash in Cat ET.

EXAMPLE:

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
238-5175 238-5176
Latest 247-6320 247-6321 1,2

In the example above, assume that an engine ECM currently has the
238-5175 flash file in it. The latest flash file available for
this engine is 247-6320 as indicated.

********************************************************************************

Reasons for software change:
********************************************************************************

1:To change from Air Shutoff configuration to air shutoff switch detection
2:To eliminate undesired starter engagement on off/reset
3:To eliminate a erroneous air shutoff detect event
4:Updated torque, monitoring and core maps with the 1835 rpm version.
5:Eliminate the nuisance event, unable to clear E2088 (1) Air Intake Shutoff Detection. Various bug fixes.
6:Updated with latest clack test software
7:Updates with Rack Stop
8:Programmable Sensors, Boost derate, J1939 Improvements, Prelube logic change, ORS support
9:Eliminate the nuisance event for Low Coolant Level and Air Shutoff Closed Events on J1939
10:Udate Jacket water toggle Yes or No
11:Fixed the PWM Throttle Failure Mode
12:Torque maps modified to add turbo surge margin and extend the scaling cutoff down to a “B” rating for Fast Ferries.
13:CPI 94859 File modified to eliminate premature cranking cycle abort
14:CPI 108202 Eliminate E198 code “low fuel pressure” on shutdown
15:CPI 105958 Overspeed verify available over J1939
16:Improvements made to reduce starting time. Delay from start of cranking to injection enable reduced.
Delay from time EMCPII receives remote start signal to engagement of starters reduced.
17:New configuration parameter added to enable or disable the “Air Shutoff Control” for engines with one air shutoff
Note: To avoid nuisance fault codes, engines without air shutoff’s need to have configuration changed to “Disabled or Off”.
18:Primary Speed Timing Sensor will now log a 190-8 if speed signal is lost while engine is operating.
19:Overcrank event added when engine fails to start after cranking cycle is exceeded. CDL EID 225, WCI 3,
J1939 SPN 1664, FMI 31
20:Boost pressure is limited to positive values (CAT datalink)
21:Low coolant level and low aftercooler level events can now be activated without engine running.
22:Additional J1939 parameter support added for the following; SCAC Temperature, SCAC Level Warning or JW Level Warning
are now communicated via low coolant message, Air Inlet Shutoff (driver status), Crankcase Pressure, Left and Right
Air Filter Differential Pressure, Overspeed Verify, Unfiltered Oil Pressure and Turbo Inlet Pressure changed from
absolute to gauge, Fuel Rate Scaling corrected, Boost Pressure limited to positive values, Overcrank Event added
(SPN 1664/FMI 31).
23:General Alarm Relay feature added; Synchronization Driver (J2-29) will activate for any active diagnostic or event,
Feature is optional but not configurable, No diagnostics are supported on driver.
24:Load Feedback Feature adds the following; Provides 4 to 20 mA output that corresponds to 0% to 100% load on engine,
Feature must be calibrated with ET Service Tool before use, Load Feedback +: J1-44, Load Feedback -:J1-45, Feature is
optional but not configurable, No diagnostics are supported on output.
25:Direct Rack available.
26:Continuous Prelube feature added the following; Periodic prelube routine when run/stop input is in the stop position,
Two new configurable parameters in ET (Engine Prelube System/Automatic or Continuous, Engine Continuous Prelube Interval),
Engine Prelube Duration (Duration = 0 still disables prelube), Need switch to ground input added to ECM (J1-64) (no
configuration in ET for this), To use the “Continuous” feature, configure prelube to “Continuous” and activate the
switch input, If configured to the “Automatic” or if configured to “Continuous” but the switch is inactive (open) the
prelube will function the same as before, No configuration change is required when flashing over existing software.
27.Rating performance monitoring added.
28:Altitude derate is now incremental and “Check Engine” indicator will light for only 15 seconds when altitude derate event
is active.
29:Add Air Shutoff relay diagnostic to resolve nuisance relay diagnostic.
30:Modified Air Shutoff Driver enable time
31:Add Air Throttle Feature.
32:Modified the Load Feed Back Calibration Strategy for three point calibration (software allows calibration of the
intermediate point instead of a fixed value. Note Full support with ET 2006A.

********************************************************************************

3508B GENSET APPLICATIoN EQUIPPED WITH A3 ECM
********************************************************************************
3508 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1952
259-8329 6
261-7515 7
266-2732 9
267-1855 10
Latest 267-7137 11
Latest 273-9063 13-27

3508 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1953
259-8330 6
261-7516 7
266-2733 9
267-1856 10
267-7138 11
Latest 273-9064 13-27

3508 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1990
259-8391 6
261-8306 7
266-2761 9
267-1884 10
267-7166 11
Latest 273-9092 13-27

3508 EPG 1200 RPM (A3 ECM) Certified
Primary Reason Code
245-1960
259-8368 6
261-7519 7
266-2738 9
267-1862 10
Latest 267-7144 11

3508 EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1988
259-8389 6
266-2759 9
267-1882 10
Latest 267-7164 11

3508 EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1989
259-8390 6
266-2760 9
267-1883 10
267-7165 11
Latest 273-9091 13-27

3508 EPG 1500 RPM (A3 ECM) Certified
Primary Reason Code
245-1997
259-8335 6
266-2737 9
267-1861 10
Latest 267-7143 11

50 EPG HZ, 1500 RPM, CONTINUOUS/PRIME/STANDBY, LO BSFC, JWAC – A3 software
Flash Part No. Chip Version Reason
Latest 257-6268 Original A3 flasfile made from 229-0265 A2

3508 EPG 1800 RPM (A3 ECM)
Primary Reason Code
245-1987
259-8388 6
266-2758 9
267-1881 10
267-7163 11
Latest 273-9089 13-27

3508 EPG 1800 RPM (A3 ECM) (Field Test File Only)
Primary Reason Code
245-1985
266-5940 9
267-1893 10
Latest 267-7175 11

3508 EPG 1800 RPM (A3 ECM) (Field Test File only)
Primary Reason Code
245-1954
266-5941 9
267-1894 10
Latest 267-7176 11

3508 EPG 1800 RPM (A3 ECM) Certified
Primary Reason Code
245-1958
259-8334 6
266-2736 9
267-1860 10
267-7142 11
Latest 273-9068 13-27

3508 EPG 1200 RPM (A3 ECM) Certified
Primary Reason Code
245-1948
259-8387 6
266-2757 9
267-1880 10
267-7162 11
Latest 273-9088 13-27

********************************************************************************

3512B GENSET APPLICATIoN EQUIPPED WITH A3 ECM
********************************************************************************

3512 EPG 1000 RPM (A3 ECM)
Primary Reason Code
245-1966
259-8374 6
261-8300 7
266-2744 9
267-1868 10
267-7150 11
Latest 273-9076 13-27

3512 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1951
259-8331 6
261-7517 7
266-2734 9
267-1857 10
Latest 267-7139 11
Latest 273-9065 13-27

3512 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1965
259-8373 6
261-7520 7
266-2743 9
267-1867 10
267-7149 11
Latest 273-9075 13-27

3512 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1974
259-8380 6
261-8302 7
266-4750 9
267-1874 10
Latest 267-7156 11
Latest 273-9082 13-27

3512 EPG 1200 RPM (A3 ECM)
Primary Reason Code
261-8315
266-2977 9
267-1895 10
Latest 267-7177 11

3512 EPG 1200 RPM (A3 ECM) Certified
Primary Reason Code
245-1967
259-8375 6
261-8301 7
266-2745 9
267-1869 10
267-7151 11
Latest 273-9077 13-27

3512 HD EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1957
259-8333 6
266-2751 9
267-1859 10
267-7141 11
Latest 273-9067 13-27

3512 EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1964
259-8372 6
266-2742 9
267-1866 10
Latest 267-7148 11

3512 EPG 1500 RPM (A3 ECM) Certified
Primary Reason Code
245-1998
259-8370 6
266-2740 9
267-1864 10
267-7146 11
Latest 273-9072 13-27

3512 EPG 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, LO BSFC
Flash Part No. Chip Version Reason
latest 257-6265 Original A3 flasfile made from 266-2984 A2

3512 EPG 50 HZ, 1500 RPM, CNT/PR/PR+10/SB, EMISSIONS – A3 software
Flash Part No. Chip Version Reason
Latest 257-6266 Original A3 flasfile made from 228-5154 A2

3512 HD EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1973
259-8379 6
266-4749 9
267-1873 10
267-7155 11
Latest 273-9081 13-27

3512 HD EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1971
259-8378 6
266-4748 9
267-1872 10
267-7154 11
Latest 273-9080 13-27

3512 HD EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1970
259-8377 6
266-2747 9
267-1871 10
267-7153 11
Latest 273-9079 13-27

3512 EPG 1800 RPM (A3 ECM)
Primary Reason Code
245-1961
259-8369 6
266-2739 9
267-1863 10
267-7145 11
Latest 273-9071 13-27

3512 EPG 1800 RPM (A3 ECM) Certified
Primary Reason Code
245-1949
259-8371 6
266-2741 9
267-1865 10
267-7147 11
Latest 273-9073 13-27

3512 EPG 1800 RPM (A3 ECM)
Primary Reason Code
245-1968
259-8376 6
266-2746 9
267-1870 10
267-7152 11
Latest 273-9078 13-27

********************************************************************************

3516B GENSET APPLICATIoN EQUIPPED WITH A3 ECM
********************************************************************************

3516 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1955
259-8328 6
261-7514 7
266-2731 9
267-1854 10
267-7136 11
Latest 273-9062 13-27

3516 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1983
259-8385 6
261-8304 7
266-2755 9
267-1878 10
Latest 267-7160 11
Latest 273-9086 13-27

3516 EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1984
259-8386 6
261-8305 7
266-2756 9
267-1879 10
Latest 267-7162 11

3516 HD EPG 1200 RPM (A3 ECM)
Primary Reason Code
245-1956
259-8332 6
261-7518 7
266-2735 9
267-1858 10
267-7140 11
Latest 273-9066 13-27

3516 HD EPG 1200 RPM (A3 ECM) Certified
Primary Reason Code
245-1980
259-8383 6
261-8303 7
266-2753 9
267-1876 10
267-7158 11
Latest 273-9084 13-27

3516 EPG 1500 RPM (A3 ECM) Certified
Primary Reason Code
245-1950
259-8396 6
266-2766 9
267-1889 10
267-7171 11
Latest 273-9097 13-27

3516 EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1978
259-8398 6
266-2768 9
267-1891 10
267-7173 11
Latest 273-9099 13-27

3516 EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1950
259-8399 6
266-2769 9
267-1892 10
Latest 267-7174 11

3516 HD EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1979
259-8382 6
266-2752 9
267-1875 10
267-7157 11
Latest 273-9083 13-27

3516 HD EPG 1500 RPM (A3 ECM)
Primary Reason Code
245-1992
259-8392 6
266-2762 9
267-1885 10
267-7167 11
Latest 273-9093 13-27

3516 HD EPG 1600 RPM (A3 ECM)
Primary Reason Code
245-1982
259-8384 6
266-2754 9
267-1877 10
267-7159 11
Latest 273-9085 13-27

3516 EPG 1800 RPM (A3 ECM)
Primary Reason Code
245-1975
259-8393 6
266-2763 9
267-1886 10
267-7168 11
Latest 273-9094 13-27

3516 EPG 1800 RPM (A3 ECM) Certified
Primary Reason Code
245-2007
259-8394 6
266-2764 9
267-1887 10
267-7169 11
Latest 273-9095 13-27

3516 EPG 1800 RPM (A3 ECM) Certified
Primary Reason Code
245-1972
259-8395 6
266-2765 9
267-1888 10
267-7170 11
Latest 273-9096 13-27

3516 EPG 1800 RPM (A3 ECM)
Primary Reason Code
245-1977
259-8397 6
266-2767 9
267-1890 10
267-7172 11
Latest 273-9098 13-27

**********************************************************************************

3508B SERIES II MARINE PROP. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************
3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9927 231-9928
247-6322 247-6323 1,2
Latest 259-8272 259-8273 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9929 231-9930
247-6324 247-6325 1,2
250-1402 250-1403 3
Latest 259-8274 259-8275 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9931 231-9932
247-6326 247-6327 1,2
Latest 259-8276 259-8277 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9933 231-9934
247-6328 247-6329 1,2
Latest 259-8278 259-8279 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9935 231-9936
247-6330 247-6331 1,2
Latest 259-8280 259-8281 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9937 231-9938
247-6332 247-6333 1,2
Latest 259-8282 259-8283 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9939 231-9940
247-6334 247-6335
254-0062 254-0063 4
Latest 259-8284 259-8285 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9991 231-9992
247-6374 247-6375 1,2
250-1412 250-1413 3
Latest 259-8286 259-8287 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9985 231-9986
247-6368 247-6369 1,2
250-1408 250-1409 3
Latest 259-8288 259-8289 8

3508 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9997 231-9998
247-6380 247-6381 1,2
Latest 259-8290 259-8291 8

**********************************************************************************

3512B SERIES II MARINE PROP. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9951 231-9952
247-6342 247-6343 1,2
Latest 259-8248 259-8249 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9965 231-9966
247-6352 247-6353 1,2
Latest 259-8250 259-8251 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9967 231-9968
247-6354 247-6355 1,2
Latest 259-8252 259-8253 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9969 231-9970
247-6356 247-6357 1,2
250-1406 250-1407 3
Latest 259-8254 259-8255 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9971 231-9972
247-6358 247-6359 1,2
Latest 259-8256 259-8257 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9973 231-9974
247-6360 247-6361 1,2
Latest 259-8258 259-8259 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9975 231-9976
247-6362 247-6363 1,2
Latest 259-8258 259-8259 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9977 231-9978
247-6364 247-6365 1,2
Latest 259-8262 259-8263 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9983 231-9984
247-6366 247-6367
Latest 259-8264 259-8264 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9987 231-9988
247-6370 247-6371 1,2
250-1410 250-1411 3
Latest 259-8266 259-8267 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9989 231-9990
247-6372 247-6373 1,2
Latest 259-8268 259-8269 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
237-9024 237-9025
247-6382 247-6383 1,2
Latest 259-8270 259-8271 8

3512 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
244-1708 244-1709
Latest 259-8296 259-8297 8

3512 HD Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9925 231-9926
Latest 261-8309 261-8310 8

**********************************************************************************

3512C SERIES II MARINE PROP. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3512C HD 1800 RPM C/D Propulsion Series II Marine Uprate (A3 ECM) – IMO Cert
Primary Secondary Reason Code
245-1131 245-1132
Latest 277-7542 277-7543 12

**********************************************************************************

3516B SERIES II MARINE PROP. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
238-5175 238-5176
247-6320 247-6321 1,2
250-1400 250-1401 3
Latest 259-8228 259-8229 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9945 231-9946
247-6336 247-6337 1,2
Latest 259-8230 259-8231 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9947 231-9948
247-6338 247-6339 1,2
Latest 259-8232 259-8233 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
238-5177 238-5178
247-6340 247-6341 1,2
250-1404 250-1405 3
Latest 259-8234 259-8235 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9953 231-9954
247-6344 247-6345 1,2
Latest 259-8236 259-8237 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9955 231-9956
247-6346 247-6347 1,2
Latest 259-8238 259-8239 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9957 231-9958
247-6348 247-6349
Latest 259-8340 259-8241 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9959 231-9960
247-6350 247-6351 1,2
Latest 259-8242 259-8243 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9995 231-9996
247-6378 247-6379 1,2
250-1414 250-1415 3
Latest 259-8244 259-8245 8

3516 Propulsion Series II Marine (A3 ECM) – IMO Cert
Primary Secondary Reason Code
231-9993 231-9994
247-6376 247-6377 1,2
Latest 259-8246 259-8247 8

**********************************************************************************

3516C SERIES II MARINE PROPULSION ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3516C HD 1800 RPM C/D Propulsion Series II Marine Uprate (A3 ECM) – IMO Cert
Primary Secondary Reason Code
245-1125 245-1126
Latest 277-7544 277-7545 12

**********************************************************************************

3508B SERIES II MARINE AUXILIARY. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3508 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9941
254-8112 5
260-3777 6
Latest 261-7508 7

3508 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9942
254-8113 5
260-3778 6
Latest 261-7509 7
Latest 273-9057 13-27

3508 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9943
254-8114 5
260-3779 6
Latest 273-9058 13-27

3508 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9944
254-8115 5
260-3780 6
Latest 273-9059 13-27

**********************************************************************************

3512B SERIES II MARINE AUXILIARY. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3512 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9979
254-8120 5
260-3785 6
Latest 261-7512 7

3512 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9980
254-8121 5
260-3786 6
261-7513 7
Latest 273-9053 13-27

3512 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9981
254-8122 5
260-3787 6
Latest 273-9054 13-27

3512 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9982
254-8123 5
260-3788 6
Latest 273-9055 13-27

**********************************************************************************

3516B SERIES II MARINE AUXILIARY. ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3516 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9961
254-8116 5
260-3781 6
Latest 261-7510 7

3516 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9962
254-8117 5
260-3782 6
261-7511 7
Latest 273-9049 13-27

3516 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9963
254-8118 5
Latest 260-3783 6
Latest 273-9050 13-27

3516 Auxiliary Series II Marine (A3 ECM) – IMO Cert
Primary Reason Code
231-9964
254-8119 5
260-3784 6
Latest 273-9051 13-27

**********************************************************************************

3508B Petroleum ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3508 Petroleum 60 HZ, 1200 RPM, EPA CERT (LAND Mech. Drive) – A3 software
Flash Part No.
Latest 254-5605 original A3 flashfile made from 251-3186 A2 file

3508 Petroleum 60 HZ, 1200 RPM, EPA CERT (LAND Electric Drive) – A3 software
Flash Part No.
Latest 254-5606 original A3 flashfile made from 275-5243 A2 file

**********************************************************************************

3512B Petroleum ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3512 Petroleum 60 HZ, 1200 RPM, EPA CERT (Land) – A3 software
Flash Part No. Chip Version Reason
Latest 254-5604 Original A3 flasfile made from 275-5244 A2 File

**********************************************************************************

3516B Petroleum ENGINES EQUIPPED WITH AN A3 ECM

**********************************************************************************

3516 Petroleum 60 HZ, 1200 RPM, EPA CERT (LAND)
Flash Part No. Chip Version Reason
latest 254-5608 Original A3 flasfile made from 213-9333 A2 File

********************************************************************************
3512B OIL WELL SERVICE (now w/high 1950 idle) Halliburton – A3
********************************************************************************
1900 RPM, EPA CERT
Flash Part No. Chip Version Reason
Latest 253-8004 Original A3 made from 245-0546 A2 file

********************************************************************************
3508B Industrial Engines Equipped with an A3 ECM
********************************************************************************

3508B IND 1800 RPM, EMISSIONS – A3
Flash Part No. Chip Version Reason
Latest 254-5609 Original A3 made from 205-6955 A2 file

********************************************************************************
3512B Industrial Engines Equipped with an A3 ECM
********************************************************************************

3512B IND 1800 RPM, EMISSIONS – A3
Flash Part No. Chip Version Reason
Latest 254-5610 Original A3 made from 205-6956 A2 file

********************************************************************************
3516B Industrial Engines Equipped with an A3 ECM
********************************************************************************

3516B 1800 RPM, EMISSIONS – A3
Flash Part No. Chip Version Reason
Latest 254-5611 Original A3 made from 234-0288 A2 file

********************************************************************************
3508B LOCOMOTIVE – A3
********************************************************************************

3508B 1500 RPM
Flash Part No. Reason
Latest 255-5574 Original A3 flashfile made from 249-1801

3508B 1573 RPM
Flash Part No. Reason
latest 254-5575 Original A3 flashfile made from 207-3609

3508B 1800 RPM
Flash Part No. Reason
latest 254-5577 Original A3 flashfile made from 205-7011

3508B 1800 RPM, ERRI Certified
Flash Part No. Reason
latest 254-5572 Original A3 flashfile made from 249-1812

********************************************************************************
3512B LOCOMOTIVE (STANDARD) – A3
********************************************************************************

3512B 1500 RPM, LO BSFC, HIGH IDLE = 1620 RPM
Flash Part No. Reason
latest 254-5581 Original A3 flashfile made from 205-7012

3512B 1500 RPM, EMISSIONS
Flash Part No. Reason
Latest 278-8327 Original A3 flashfile made from 261-8313

3512B 1660 RPM, EMISSIONS
Flash Part No. Reason
latest 254-5580 Original A3 flashfile made from 205-7015

3512B 1750 RPM, EMISSIONS
Flash Part No. Reason
latest 278-8320 Original A3 flashfile made from 251-3190

3512B 1800 RPM, EMISSIONS
Flash Part No. Reason
latest 254-5583 Original A3 flashfile made from 205-7010

3512B 1800 RPM, EPG, EMISSIONS
Flash Part No. Reason
latest 277-9445 Original A3 flashfile made from 242-5340

3512B 1800 RPM, SPECIAL
Flash Part No. Reason
latest 254-5579 Original A3 flashfile made from 205-7016

3512B 1845 RPM, SPECIAL 1% High Idle
Flash Part No. Reason
latest 254-5578 Original A3 flashfile made from 249-1811

********************************************************************************
3516B LOCOMOTIVE (EMD) – A3
********************************************************************************

3516B 1800 RPM
Flash Part No. Reason
Latest 277-9447 Original A3 flashfile created from 236-2276

***************************************************************
3512B HIGH DISPLACEMENT LOCOMOTIVE APPLICATION
***************************************************************

60HZ, 1800 RPM, LOW EMISSIONS
Flash Part No. Reason
Latest 278-8318 Original A3 flashfile created from 249-1809
================================================================================
LTTT DriveTrain Flash Files
FLASH SOFTWARE NOW AVAILABLE FOR TRACK TYPE
TRACTOR MODELS

D10R (3KR)
D11R (8ZR, 9TR, 9XR, 7PZ, AAF)

Reference:
Special Instruction, REHS0494, Accessing Flash Software for Machines;
SENR8367, Power Train Electronic Control System for Track Type
Tractors

Description of Change:
Flash software is now available for the drivetrain controller on the track
type tractor models listed above. The feature enhancements of this new
software are described below:

Removes 248F09 Fault Code
No longer allows flash programming if the parking brake is released.
Accommodates the new 1/2″ solenoid valves
Implementation of solenoid diagnostic and driver control changes to
keep drivers off, when they are commanded off
VIDS calibration security functionality added for 7PZ and AAF prefix
D11R tractors
Manual brake touch-up calibration functionality added for 7PZ and AAF
prefix D11R tractors

Note: When flashing software, always be sure to use the latest software
release available.

Adaptable To:
The new software is directly adaptable to the track type tractors listed above.

Model New Part
D10R 183-7424
D11R 183-7424
================================================================================
Machine Flash file part numbers
The following document contains a listing of flash files for basic
MAC-14 applications AND a listing of available pre-programmed ECMs
for premium MAC-14 applications.

CHART “A” contains flash files applicable to basic MAC-14 ECMs only.
CHART “B” contains a listing of pre-programmed premium ECMs.

Please refer to and read all notes at the bottom of each list.

NOTICE:
SOME MAC-14 MACHINE CONTROLS MAY CONTAIN PREMIUM SOFTWARE. THESE
PREMIUM CONTROLS INCLUDE AUTOSHIFT TRANSMISSION ECMs FOR
MOTORGRADERS, ARC CONTROLS FOR SMALL OFF-HIGHWAY TRUCKS, AND
INTEGRATED BRAKE CONTROLS FOR SMALL OFF-HIGHWAY TRUCKS. THE FLASH
FILES FOR THESE CONTROLS ARE NOT AVAILABLE TO THE FIELD. FLASHING
A PREMIUM BOX WITH A BASIC FLASH FILE WILL RESULT IN LOST
FUNCTIONALITY.

CHART A: BASIC MAC-14 APPLICATIONS – FLASH FILES
**********************************************************************
Machine Application / Description (notes) Flash File
**********************************************************************
938G traction control 170-4871
IT38G traction control 170-4871
950G transmission control 192-9953
962G transmission control 192-9953
IT62G transmission control 192-9953
966G transmission control 192-9953
972G transmission control 192-9953
950G implement control 187-8499
962G implement control 187-8499
966G implement control 187-8499
972G implement control 187-8499
980G transmission control 196-1262
824G transmission control 185-8099
825G transmission control 185-8099
826G transmission control 185-8099
980G implement control 175-0228
824G implement control 186-2954
825G implement control 186-2954
826G implement control 186-2954
988G transmission control 174-6077
988G implement control 174-6079
992G transmission control 174-9009
992G implement control 174-9007
854G transmission control 178-4215
994D transmission control 188-4503
525B transmission control 172-4623
535B transmission control 172-4623
545 transmission control 172-4623
D5M drivetrain control 191-5019
D6M drivetrain control 191-5019
D6R drivetrain control 191-5019
D7R drivetrain control 191-5019
D8R drivetrain control 199-0928
572R drivetrain control 191-5021
D10R drivetrain control 183-7424
D11R drivetrain control 183-7424
953C drivetrain control 199-7184
963C drivetrain control 199-7184
973C drivetrain control 199-7184
5130A machine control 186-5154
5130B machine control 196-7827
5230A machine control 196-7825
12H transmission control – basic 190-8457
120H transmission control – basic 190-8457
130H transmission control – basic 190-8457
135H transmission control – basic 190-8457
140H transmission control – basic 190-8457
160H transmission control – basic 190-8457
143H transmission control – basic 190-8457
163H transmission control – basic 190-8457
24H transmission control 161-2019
12H transmission control – basic – homologation (1) 190-8462
120H transmission control – basic – homologation (1) 190-8462
130H transmission control – basic – homologation (1) 190-8462
135H transmission control – basic – homologation (1) 190-8462
140H transmission control – basic – homologation (1) 190-8462
160H transmission control – basic – homologation (1) 190-8462
143H transmission control – basic – homologation (1) 190-8462
163H transmission control – basic – homologation (1) 190-8462
D250E II powertrain control 198-2810
D300E II powertrain control 198-2810
D350E II powertrain control 198-2810
D400E II powertrain control 198-2810
769D transmission control 201-4703
771D transmission control 201-4703
773D transmission control 201-4703
775D transmission control 201-4703
776D transmission control 201-4703
777D transmission control 201-4703
784C transmission control 201-4703
785C transmission control 201-4703
789C transmission control 201-4703
793C transmission control 201-4703
769D traction control system 184-4622
771D traction control system 184-4622
773D traction control system 184-4622
775D traction control system 184-4622
776D traction control system 184-4622
777D traction control system 184-4622
784C integrated brake control 199-5076
785C integrated brake control 199-5076
789C integrated brake control 199-5076
793C integrated brake control 199-5076

NOTES:

(1) Homologation refers to a limited road speed version of motorgrader
sold in Italy.

CHART B: PREMIUM MAC-14 APPLICATIONS – PRE PROGRAMMED ECMS
**********************************************************************
Machine Application / Description (notes) Pre-prog ECM
**********************************************************************
12H transmission control – AUTOSHIFT 190-8461
120H transmission control – AUTOSHIFT 190-8461
130H transmission control – AUTOSHIFT 190-8461
135H transmission control – AUTOSHIFT 190-8461
140H transmission control – AUTOSHIFT 190-8461
160H transmission control – AUTOSHIFT 190-8461
143H transmission control – AUTOSHIFT 190-8461
163H transmission control – AUTOSHIFT 190-8461
12H transmission control – AUTOSHIFT homologation (1) 190-8465
120H transmission control – AUTOSHIFT homologation (1) 190-8465
130H transmission control – AUTOSHIFT homologation (1) 190-8465
135H transmission control – AUTOSHIFT homologation (1) 190-8465
140H transmission control – AUTOSHIFT homologation (1) 190-8465
160H transmission control – AUTOSHIFT homologation (1) 190-8465
143H transmission control – AUTOSHIFT homologation (1) 190-8465
163H transmission control – AUTOSHIFT homologation (1) 190-8465
769D integrated brake control 184-5116
771D integrated brake control 184-5116
773D integrated brake control 184-5116
775D integrated brake control 184-5116
776D integrated brake control 184-5116
777D integrated brake control 184-5116
769D automatic retarder control (ARC) 184-5110
771D automatic retarder control (ARC) 184-5110
773D automatic retarder control (ARC) 184-5110
775D automatic retarder control (ARC) 184-5110
776D automatic retarder control (ARC) 184-5110
777D automatic retarder control (ARC) 184-5110

NOTES:

(1) Homologation refers to a limited road speed version of motorgrader
sold in Italy.

================================================================================
191-5019 d/t s/w for MTTT
191-5019

MTTT Flash Software Now Available

SMCS Code: 7620

Track-Type Tractor:
D5M
D6M
D6R
D7R

Reference: Special Instruction REHS0494, “Accessing Flash Software
for Machines”.

Reference: Systems Operation, Testing and Adjusting, SENR8367.

Description of Change: Flash software is now available for the drive
train controller. The following enhancements have been made to the
software:

Support for both older 5/8″, and newer 1/2″, ECPC transmission
valves

To install the software, perform the following operations in this order.
1 — Install the new software
2 — Bring the transmission up to operating temperature
3 — Perform the clutch engagement and fill calibrations
(submodes 31-35, 40)

Perform all calibrations per the Systems Operation, Testing and
Adjusting Manual. Do not attempt to reload values from previous software
versions as they are not valid with the new software.

Note: Verify that you are using the latest software release that is
available whenever you flash software.

Machine Adaptability:

Model Part Number
D5M 191-5019
D6M 191-5019
D6R 191-5019
D7R 191-5019
================================================================================
191-5021 d/t s/w for 572R pipelayer
191-5021

PL Flash Software Now Available

SMCS Code: 7620

Pipelayers:
572R

Reference: Special Instruction REHS0494, “Accessing Flash Software
for Machines”.

Reference: Systems Operation, Testing and Adjusting, SENR8367.

Description of Change: Flash software is now available for the drive
train controller. The following enhancements have been made to the
software:

Support for both older 5/8″, and newer 1/2″, ECPC transmission
valves

Perform all calibrations per the Systems Operation, Testing and
Adjusting Manual. Do not attempt to reload values from previous software
versions as they are not valid with the new software.

Note: Verify that you are using the latest software release that is
available whenever you flash software.

Machine Adaptability:

Model Part Number
572R 191-5021
================================================================================
======================================================================
C-Series Excavators 320, 322, 325, and 330 Flash File Cross Reference
March 29, 2004
Revision 3

Current production Flash files for the ECM used on the following
C-Series machines 320, 322, 325, and 330 are available by downloading
the files from SIS Web. All ECM’s on a tractor should be updated each
time a particular module is flashed in order to take advantage of the
added features and improvements.

NOTE !!!
Service personnel should go into SERVICE OPTIONS from the MAIN MENU
to access software version. Following are the steps and parameters
to follow for accessing software version:

At Main Display, hit MENU button
Scroll down to SERVICE OPTIONS
Press OK key
First line should say SERVICE and second line ECM SUMMARY
Go down and highlight the third line
Use right or left arrow key to change third line to parameter 006
*Parameter is for Standard controller software*
Use right or left arrow key change third line to parameter 105
*Parameter is for Attachment controller software*
Exit SERVICE OPTIONS mode

Service personnel should make a note of each parameter reviewed.

If ‘STD – ATT NOT COMPATIBLE’ or ‘STD – MON NOT COMPATIBLE’
appears on the monitor display screen, use the steps above to
understand what software is currently flashed in the controllers.

ADEM controller software is not available via the monitor.
To view ADEM software version, Electronic Technician (ET) should
be used.

WARNING!!!
Since, the flash process erases the software file from the ECM
before programming it, a failure while flashing the module will
render that module inoperable (loss communication); and depending
on which module is being flashed could render the tractor inoperable.
Once this occurs, there are two options: 1) if failure was due to loss
of communication (CDL wires pulled or battery went dead), reestablish
communications with the module and re-flash. Or 2) if failure was due
to a corrupt Flash file, flash the ECM with any earlier software version.

320C
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
191-6922 191-6866 191-6879 Fix Fluid/Filter “0 Hour” display problem

195-8835 195-8839 195-8837 ET 3.2 Compatible

195-8918 195-8923 195-8837 Tier II Engine Introduction
2Pump Flow Simultaneous Operation Improvement
Overload Warning Device switch logic fix

195-9017 195-9019 195-9021 2Pump Flow Simultaneous Operation Improvement
Change engine speed dial setting and hydraulic
output dial setting of throttle position 1,2,3
Overload warning device switch logic fix

211-5557 211-5561 211-5559 AEC Stage 0 Elimination
ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement
Improve engine speed display Service Function
Improve communication function of key switch
turning with short interval

320C Tier II
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
227-7626 227-7630 211-5559 Add engine stopping function (backup of
governor actuator failure).

322C Tier I
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
195-8920 195-8925 185-2493 First Production

195-8968 195-8925 195-8970 2Pump Flow Simultaneous Operation Improvement

211-5503 211-5505 195-8970 Overload warning device switch logic fixed

211-5563 211-5565 211-5567 AEC Stage 0 Elimination
ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement
Improve engine speed display of Service function
Improve communication function of key switch
turning with short interval.
Change detecting time of low engine oil pressure.

322C Tier II
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
211-5653 211-5655 211-5567 First Production
ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement

227-7600 227-7606 211-5567 Change ‘590-12’ error code to ‘590-09 error
code, which will indicate loss of communication
with engine ECM. All engine error codes
should be viewed on the engine ECM via ET.

325C
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
195-8988 195-8903 (175 HP) 191-6847 First Production

195-8988 195-8903 (175 HP) 195-8994 2Pump Flow Simultaneous Operation Improvement
Overload Warning Device switch logic fix

211-5569 211-5571 (175 HP) 211-5577 AEC Stage O Elimination
ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement
Improve engine speed display of Service Function
Improve communication function of key switch
turning with short interval.
Correspond to ‘Individual Clear’ and ‘All Clear’
of diagnostic codes of ADEM 3
High Ambient: reverse bug of Straight Travel
solenoid control.

227-7602 227-7610 (175 HP) 211-5577 Change ‘590-12’ error code to ‘590-09’ error
code, which will indicate loss of communication
with engine ECM. All engine related error codes
should be viewed on the engine ECM via ET.

325C
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
195-8938 191-6849 (190 HP) 191-6847 First Production

195-8990 195-8992 (190 HP) 195-8944 2Pump Flow Simultaneous Operation Improvment
Overload Warning Device switch logic fix

211-5573 211-5575 (190 HP) 211-5577 AEC Stage 0 Elimination
ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement
Improve engine speed display of Service Function
Improve communication function of key switch
turning with short interval.
Correspond to ‘Individual Clear’ and ‘All Clear’
of diagnostic codes of ADEM 3

227-7608 227-7612 (190 HP) 211-5577 Change ‘590-12’ error code to ‘590-09’ error
code, which will indicate loss of communication
with engine ECM. All engine related error codes
should be viewed on the engine ECM via ET.

330C
STD Controller Software Attachment Controller Software Release Reason
Normal High Ambient
195-8996 191-6855 195-8929 First Production
2Pump Flow Simultaneous Operation Improvement
Overload Warning Device switch logic fix
AEC Stage 0 Elimination

211-5550 191-6855 211-5552 ET2001B Compatible
1Pump Flow Simultaneous Operation Improvement

227-7604 227-7614 211-5552 Change ‘590-12’ error code to ‘590-09’ error
code, which will indicate loss of communication
with engine ECM. All engine related error codes
should be viewed on the engine ECM via ET.

================================================================================
=============================================================
C-Series Excavator 320, 322, 325, and 330 Monitor
Flash File Cross Reference

March 29, 2004
Revision 3

Current production Flash files for the monitor used on the
following C-Series machines 320, 322, 325, and 330 are
available by downloading the files from SIS Web.
All ECM’s on a tractor should be updated each time a
particular module is flashed in order to take advantage of
added features and improvements.

NOTE !!!
If ‘STD – MON NOT COMPATIBLE’ appears on the monitor display screen
then software versions for the monitor and machine need to be.
verified by Service Personnel.

To verify the monitor software version use Winflash via
Electronic Technician.

To verify the machine software version, use the following steps:

At Main Display, hit MENU key
Scroll down to SERVICE OPTIONS
Press OK key
First line should say SERVICE and second line ECM SUMMARY
Go down and highlight the third line
Use right or left arrow key to change third line to parameter 006
*Parameter is for Standard controller software*
Use right or left arrow key change third line to parameter 105
*Parameter is for Attachment controller software*

WARNING !!!
Since, the flash process erases the software file from the ECM
before programming it, a failure while flashing the module
will render that module inoperable (loss communication); and
depending on which module is being flashed could render the tractor
inoperable.
Once this occurs, there are two options: 1) if failure was due
to loss of communication (CDL wires pulled or battery went
dead), reestablish communications with the module and re-flash.
Or 2) if failure was due to a corrupt Flash file, flash the
ECM with any earlier software version.

Monitor Software Packages
South Europe (used on all machines in NACD)
*Supported languages: English, French, German, Italian,
Japanese, Spanish, and Portuguese
Software versions: Release Reason
Old 177-7690 First Production C-Series – 320C
(24 Hour clock)

195-8866 Changed to agree with machine software changes
(24 Hour clock)

211-5522 Add 12 Hour clock
Improve precision of display time

211-5617 Improve datalink communication
(24/12 Hour clock)

221-8750 Fixed function of 12 Hour clock
(24/12 Hour clock)

221-8840 Add retry process for software download
(24/12 Hour clock)

New 247-5140 Improved software for download using ET or PSPS
(24/12 Hour clock)

Only monitor software 195-8866 and higher is compatible with all C-Series Software.
Software 177-7690 is only compatible with First Production 320C.

West Europe
*Supported languages: English, Dutch, French, German, and Italian

Software versions: Release Reason
Old 177-7687 First Production C-Series – 320C
(24 Hour clock)

195-8864 Changed to agree with machine software changes
(24 Hour clock)

211-5528 Add 12 Hour clock
Improve precision of display time

211-5615 Improve datalink communication
(24/12 Hour clock)

221-8756 Fixed function of 12 Hour clock
(24/12 Hour clock)

221-8839 Add retry process for software download
(24/12 Hour clock)

New 247-5142 Improved software for download using ET or PSPS
(24/12 Hour clock)

Only monitor software 195-8864 and higher is compatible with all C-Series Software.
Software 177-7687 is only compatible with First Production 320C.

East Europe
*Supported languages: English, Czech, German, Greek, Russian, and Turkish

Software versions: Release Reason
Old 177-7684 First Production C-Series – 320C
(24 Hour clock)

195-8862 Changed to agree with machine software changes
(24 Hour clock)

211-5525 Add 12 Hour clock
Improve precision of display time

211-5613 Improve datalink communication
(24/12 Hour clock)

221-8754 Fixed function of 12 Hour clock
(24/12 Hour clock)

221-8838 Add retry process for software download
(24/12 Hour clock)

New 247-5143 Improved software for download using ET or PSPS
(24/12 Hour clock)

Only monitor software 195-8862 and higher is compatible with all C-Series Software.
Software 177-7684 is only compatible with First Production 320C.

North Europe
*Supported languages: English, Danish, Finnish, Icelandic, Norwegian, and Swedish

Software versions: Release Reason
Old 177-7681 First Production C-Series – 320C
(24 Hour clock)

195-8860 Changed to agree with machine software changes
(24 Hour clock)

211-5531 Add 12 Hour clock
Improve precision of display time

211-5611 Improve datalink communication
(24/12 Hour clock)

221-8752 Fixed function of 12 Hour clock
(24/12 Hour clock)

New 221-8837 Add retry process for software download
(24/12 Hour clock)

Only monitor software 195-8860 and higher is compatible with all C-Series Software.
Software 177-7681 is only compatible with First Production 320C.

Asia
*Supported languages: English, Indonesian, Japanese, Chinese, and Thai

Software versions: Release Reason
Old 185-2525 First Production C-Series – 320C
(24 Hour clock)

195-8868 Changed to agree with machine software changes
(24 Hour clock)

211-5534 Add 12 Hour clock
Improve precision of display time

211-5619 Improve datalink communication
(24/12 Hour clock)

221-8758 Fixed function of 12 Hour clock
(24/12 Hour clock)

221-8841 Add retry process for software download
(24/12 Hour clock)

New 247-5144 Improved software for download using ET or PSPS
(24/12 Hour clock)

Only monitor software 195-8868 and higher is compatible with all C-Series Software.
Software 185-2525 is only compatible with First Production 320C.

Norwegian
*Supported languages: English, Danish, Finnish, Icelandic, Norwegian, and Swedish

Software versions: Release Reason
Old 227-7568 Released to provide Norwegian language package
(24/12 Hour clock)

New 247-5141 Improved software for download using ET or PSPS
(24/12 Hour clock)

================================================================================
3126E HEUI Flash File Cross Reference
Updated Jan 21, 2004

===========================================================================
===========================================================================

Released software to meet 2.09.2 Clean Power Phase II, Adem 2000,
Version 6, 7, & 8 ECM, MY2001 EPA Emission for April 2001
Production with 24 MHz ECM,
Support for 3.5 NOx FEL Truck Consent Decree, and
GM Two Speed Axle Switch Update.

Description Serial Flash Part IC Release
No.Range No. Date
*************************************************************************
175 HP @ 2200 CKM 1 and up 246-8293 219 NOV03
420 @ 1500 EPA Cert

190 HP @ 2400 CKM 1 and up 246-8292 229 NOV03
420 @ 1500 EPA Cert.

190 HP @ 2300 CKM 1 and up 246-8291 227 NOV03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

210 HP @ 2400 CKM 1 and up 246-8290 228 NOV03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

****** Standard Ratings ***************

210 HP @ 2200 CKM 1 and up 246-8289 222 NOV03
520 @ 1500 EPA Cert.

210 HP @ 2200 CKM 1 and up 246-8288 223 NOV03
605 @ 1500 EPA Cert.

230 HP @ 2200 CKM 1 and up 246-8287 206 NOV03
660 @ 1500 EPA Cert.

250 HP @ 2200 CKM 1 and up 246-8286 207 NOV03
660 @ 1500 EPA Cert.

250 HP @ 2200 CKM 1 to CKM10423 246-8285 208 NOV03
800 @ 1500 EPA Cert.

250 HP @ 2200 CKM10424 and up 246-8284 205 NOV03
800 @ 1500 EPA Cert.

275 HP @ 2200 CKM 1 and up 246-8283 209 NOV03
800 @ 1500 EPA Cert.

275 HP @ 2200 CKM 1 and up 246-8282 210 NOV03
860 @ 1500 EPA Cert.

300 HP @ 2200 CKM 1 and up 246-8281 211 NOV03
800 @ 1500 EPA Cert.

300 HP @ 2200 CKM 1 and up 246-8280 212 NOV03
860 @ 1500 EPA Cert.

******************** Emergency Ratings *****************************

275 HP @ 2200 CKM 1 and up 246-8279 213 NOV03
800 @ 1500 Emergency.

275 HP @ 2200 CKM 1 and up 246-8278 214 NOV03
860 @ 1500 Emergency.

300 HP @ 2200 CKM 1 and up 246-8277 215 NOV03
800 @ 1500 Emergency.

300 HP @ 2200 CKM 1 and up 246-8276 216 NOV03
860 @ 1500 Emergency.

330 HP @ 2400 CKM 1 and up 246-8275 217 NOV03
860 @ 1500 Emergency

******************* RV Rating **************************************

330 HP @ 2400 CKM 1 and up 246-8274 218 NOV03
860 @ 1500 RV

================================================================================
3116 HEUI Flash File Cross Reference
Updated Jan 22, 2004

1WM 7LZ 8WL AND 7AS flash files for engine rebuild kits
ADEM II AND ADEM III Low Nox engine rebuild kit flash files
Updated July 6,2001
******************* 3116 Standard Ratings **************************

170 HP @ 2200 8WL 1 and up 188-8046 301 JAN00
420 @ 1560 EPA LoNox Cert.

185 HP @ 2200 8WL 1 and up 188-8047 302 JAN00
520 @ 1560 EPA LoNox Cert.

190 HP @ 2300 8WL 1 and up 188-8053 303 JAN00
520 @ 1560 EPA LoNox Cert.

195 HP @ 2200 8WL 1 and up 188-8048 303 JAN00
520 @ 1560 EPA LoNox Cert.

215 HP @ 2200 8WL 1 and up 188-8049 304 JAN00
605 @ 1560 EPA LoNox Cert.

230 HP @ 2200 8WL 1 and up 188-8050 305 JAN00
660 @ 1560 EPA LoNox Cert.

250 HP @ 2200 8WL 1 and up 188-8051 306 JAN00
660 @ 1560 EPA LoNox Cert.

275 HP @ 2200 8WL 1 and up 188-8052 307 JAN00
750 @ 1470 EPA LoNox Cert.

********************** 3126 Standard Ratings ************************

175 HP @ 2400 1WM/7LZ 1 and up 188-8054 301 JAN00
420 @ 1440 EPA LoNox Cert.

190 HP @ 2200 1WM/7LZ/4ES 1 and up 188-8055 302 JAN00
520 @ 1440 EPA LoNox Cert.

210 HP @ 2400 1WM/7LZ 1 and up 188-8056 303 JAN00
520 @ 1440 EPA LoNox Cert.

210 HP @ 2200 1WM/7LZ/4ES 1 and up 188-8057 304 JAN00
605 @ 1440 EPA LoNox Cert.

230 HP @ 2200 1WM/7LZ/4ES 1 and up 188-8058 305 JAN00
660 @ 1440 EPA LoNox Cert.

250 HP @ 2200 1WM/7LZ/4ES 1 and up 188-8059 306 JAN00
660 @ 1440 EPA LoNox Cert.

250 HP @ 2200 1WM/7LZ 1 and up 188-8060 307 JAN00
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 1WM/7LZ 1 and up 188-8061 308 JAN00
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 1WM/7LZ 1 and up 188-8062 309 JAN00
860 @ 1440 EPA LoNox Cert.

300 HP @ 2200 1WM/7LZ 1 and up 188-8063 311 JAN00
800 @ 1440 EPA LoNox Cert.

300 HP @ 2200 1WM/7LZ 1 and up 188-8064 310 JAN00
860 @ 1440 EPA LoNox Cert.

300 HP 1WM1 and Up 130-7832 16 OCT96
860 @ 1440 OWS

***************** Emergency Vehicles ********************************

275 HP @ 2200 1WM 1 and up 188-8065 312 JAN00
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 1WM 1 and up 188-8066 313 JAN00
860 @ 1440 EPA LoNox Cert.

300 HP @ 2200 1WM 1 and up 188-8067 314 JAN00
800 @ 1440 EPA LoNox Cert.

300 HP @ 2200 1WM 1 and up 188-8068 315 JAN00
860 @ 1440 EPA LoNox Cert.

330 HP @ 2200 1WM 1 and up 188-8069 320 JAN00
860 @ 1440 EPA LoNox Cert.

330 HP @ 2200 1WM 1 and up 188-8070 321 JAN00
860 @ 1440 EPA LoNox Cert.

**************************CEC Rating*********************************
250 HP @ 2200 1WM 1 and up 188-8071 319 JAN00
800 @ 1440 EPA LoNox Cert.

**************** Hi-performance AT/MT/HT Rating *********************

190 HP @ 2300 1WM/7LZ 1 and up 188-8072 302 JAN00
520 @ 1440 EPA LoNox Cert.

********************** 3126B Standard Ratings ************************

175 HP @ 2400 7AS 1 and up 246-8248 301 NOV03
420 @ 1440 EPA LoNox Cert.

190 HP @ 2200 7AS 1 and up 246-8247 302 NOV03
520 @ 1440 EPA LoNox Cert.

**************** Hi-performance AT/MT/HT Rating *********************
190 HP @ 2300 7AS 1 and up 246-8246 302 NOV03
520 @ 1440 EPA LoNox Cert.

210 HP @ 2400 7AS 1 and up 246-8245 332 NOV03
520 @ 1440 EPA LoNox Cert.

*********************************************************************

210 HP @ 2200 7AS 1 and up 246-8244 303 NOV03
520 @ 1440 EPA LoNox Cert.

210 HP @ 2200 7AS 1 and up 246-8243 304 NOV03
605 @ 1440 EPA LoNox Cert.

************************** DINA Only *******************************
210 HP @ 2200 7AS 1 and up 246-8242 329 NOV03
605 @ 1440 EPA LoNox Cert.

*******************************************************************

230 HP @ 2200 7AS 1 and up 246-8241 305 NOV03
660 @ 1440 EPA LoNox Cert.

250 HP @ 2200 7AS 1 and up 246-8240 306 NOV03
660 @ 1440 EPA LoNox Cert.

250 HP @ 2200 7AS 1 and up 246-8239 307 NOV03
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 7AS 1 and up 246-8238 308 NOV03
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 7AS 1 and up 246-8237 309 NOV03
860 @ 1440 EPA LoNox Cert.

300 HP @ 2200 7AS 1 and up 246-8236 310 NOV03
800 @ 1440 EPA LoNox Cert.

300 HP @ 2200 7AS 1 and up 246-8235 311 NOV03
860 @ 1440 EPA LoNox Cert.

***************** Emergency Vehicles *******************************

275 HP @ 2200 7AS 1 and up 246-8234 312 NOV03
800 @ 1440 EPA LoNox Cert.

275 HP @ 2200 7AS 1 and up 246-8233 313 NOV03
860 @ 1440 EPA LoNox Cert.

300 HP @ 2200 7AS 1 and up 246-8232 314 NOV03
800 @ 1440 EPA LoNox Cert.

300 HP @ 2200 7AS 1 and up 246-8231 315 NOV03
860 @ 1440 EPA LoNox Cert.

330 HP @ 2400 7AS 1 and up 246-8230 316 NOV03
860 @ 1440 EPA LoNox Cert.

***************** Recreational Vehicles *****************************

330 HP @ 2400 7AS 1 and up 246-8229 317 NOV03
860 @ 1440 EPA LoNox Cert.

Updated JAN 29, 2001
******************* FMTV Vehicles Only ********************************

275 HP @ 2200 6PZ 1 and up 224-4622 119 SEP02
860 @ 1440 EPA LoNox Cert.

330 HP @ 2400 7JZ 1 and up 224-4623 120 SEP02
860 @ 1440 EPA LoNox Cert.

350 HP @ 2400 1AJ 1 and up 224-4627 45 SEP02
820 @ 1500 EPA LoNox Cert.

===========================================================================
TEST ECM Primer Software file 188-9579 MAR00

NOTE: Flash this file into ADEM 2000 Test ECM before loading any engine
flash file.
===========================================================================

3126B 8YL HEUI Flash File Cross Reference
Updated JAN 29, 2001

The reason for this SEP 00 release was to provide Software features
including:

For all ratings except Euro II:

Released software to meet 2.09 Version 6&7, 4g S.S.NOx MY2000
EPA emission for Sep 2000 production with 24 MHz ECM, support for
GM2001i truck,consent decree torque and timing readout, updated
idle quality adjustment maps,and modify progressive shift.

For Euro II rating:

Released software to meet 2.09 Version 6&7, 6g S.S.NOx MY2000 EPA emission
for Sep 2000 production with 24 MHz ECM, support for GM2001i truck,
consent decree torque and timing readout,updated idle quality adjustment
maps, and modify progressive shift.

This software update also contains a fix for false logging of injector faults.
Revision to Exhaust Brake Special Test.Improvements to reduce ECM Engine software
Lock-Up.
Enhancements for vehicles with Allision AT/MT/HT transmission.Combines

Interlock codesfor use on GM = IC1 and NON GM = IC2 chassis.

NOTE: Duel Fuel and Steel Piston Parts Service Only files are not in this release.

Description Serial Flash Part IC IC2 Release
No.Range No. Date

*************** 175 and 190 HP can be used with *******************
************** Allison AT545 Transmission *******************

175 HP @ 2200 8YL 1 to 8YL34999 246-8273 101 151 NOV03
420 @ 1500 EPA Cert

175 HP @ 2200 8YL35000 and up 246-8272 169 169 DEC03
420 @ 1500 EPA Cert

190 HP @ 2300 8YL 1 to 8YL34999 246-8271 102 152 NOV03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

190 HP @ 2300 8YL35000 and up 246-8270 170 170 DEC03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

****** 210HP Rating with an Allison AT545 *************
****** Transmission *************

210 HP @ 2400 8YL 1 to 8YL34999 246-8269 103 153 NOV03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

210 HP @ 2400 8YL35000 & 9SZ 1 and up 246-8268 171 171 DEC03
520 @ 1500 EPA Cert. ***** HIGH PERFORMANCE AT545 *****

****** Standard Ratings ***************

210 HP @ 2200 8YL 1 to 8YL34999 246-8267 104 154 NOV03
520 @ 1500 EPA Cert.

210 HP @ 2200 8YL35000 & 9SZ 1 and up 246-8266 172 172 DEC03
520 @ 1500 EPA Cert.

210 HP @ 2200 8YL 1 to 8YL34999 246-8265 105 155 NOV03
605 @ 1500 EPA Cert.

210 HP @ 2200 8YL35000 & 9SZ 1 and up 246-8264 173 173 DEC03
605 @ 1500 EPA Cert.

230 HP @ 2200 8YL & 9SZ 1 and up 246-8263 106 156 DEC03
660 @ 1500 EPA Cert.

250 HP @ 2200 8YL 1 TO 8YL68263 246-8262 107 157 NOV03
660 @ 1500 EPA Cert.

250 HP @ 2200 8YL68264 & 9SZ 1 and up 246-8261 187 187 DEC03
660 @ 1500 EPA Cert.

250 HP @ 2200 8YL 1 TO 8YL68263 246-8260 108 158 NOV03
800 @ 1500 EPA Cert.

250 HP @ 2200 8YL68264 & 9SZ 1 and up 246-8259 188 188 DEC03
800 @ 1500 EPA Cert.

275 HP @ 2200 8YL & 9SZ 1 and up 246-8258 109 159 DEC03
800 @ 1500 EPA Cert.

275 HP @ 2200 8YL & 9SZ 1 and up 246-8257 110 160 DEC03
860 @ 1500 EPA Cert.

300 HP @ 2200 8YL & 9SZ 1 and up 246-8256 111 161 DEC03
800 @ 1500 EPA Cert.

300 HP @ 2200 8YL & 9SZ 1 and up 246-8255 112 162 DEc03
860 @ 1500 EPA Cert.

******************** Emergency Ratings *****************************

275 HP @ 2200 8YL & 9SZ 1 and up 246-8254 113 163 DEC03
800 @ 1500 Emergency.

275 HP @ 2200 8YL & 9SZ 1 and up 246-8253 114 164 DEC03
860 @ 1500 Emergency.

300 HP @ 2200 8YL & 9SZ 1 and up 246-8252 115 165 DEC03
800 @ 1500 Emergency.

300 HP @ 2200 8YL & 9SZ 1 and up 246-8251 116 166 DEC03
860 @ 1500 Emergency.

330 HP @ 2400 8YL & 9SZ 1 and up 246-8250 117 167 DEC03
860 @ 1500 Emergency

******************* RV Rating **************************************

330 HP @ 2400 8YL & 9SZ 1 and up 246-8249 118 168 DEC03
860 @ 1500 RV

3126 HEUI (8HW) EURO 2 FLASH File Cross Reference
Updated JAN 29,2001
***************************************************************************
Description Serial NO. FLASH PART IC Release
Range NO. Date

190 HP 8HW00001 & up 146-9883 22 DEC97
520 @ 1440

210 HP 8HW00001 & up 146-9880 23 DEC97
605 @ 1440

275 HP 8HW00001 & up 187-2097 24 NOV99
830 @ 1440

300 HP 8HW00001 & up 187-2096 25 NOV99
860 @ 1440

********** FULL FEATURE ECM FILES *****************************************

Description Serial NO. FLASH PART IC IC2 Release
Range NO. Date

190 HP @ 2300 8SZ00532 & up 212-4002 125 125 OCT01
520 @ 1440

210 HP @ 2200 8SZ00532 & up 212-4001 126 126 OCT01
605 @ 1440

250 HP @ 2200 8SZ00532 & up 212-4000 127 127 OCT01
800 @ 1440

275 HP @ 2200 8SZ00001 & up 212-3999 128 128 OCT01
830 @ 1440

300 HP @ 2200 8SZ00001 & up 212-3998 129 129 OCT01
860 @ 1440
======================================================================
======================================================================
======================================================================
================================================================================
3126B Marine Flash file reference
3126B HEUI MARINE Flash File Cross Reference
Updated Jan 29,2001

Description Serial Flash Part IC Release
No.Range No. Date

420 HP 3GS 1 and Up 203-4002 11 DEC OO

450 HP 3GS 1 and Up 203-4003 1 DEC OO
================================================================================
************** 3126E HEP Flash File Reference *****************
Updated December 6, 2002
******************************************************************
Emergency Vehicle Ratings
Serial No.Range
Part Number
Interlock Code Rating/Application Information
*******************************************************************
HEP1 – HEP07579
227-9339 3126 Truck 330HP 860 lb-ft, 2400 RPM ER Date Code SEP02
Interlock Code = 251
Replaced 225-2366

HEP07580 & UP
231-2609 3126 Truck 330HP 860 lb-ft, 2400 RPM ER Date Code OCT02
Interlock Code = 298

HEP1 – HEP07579
227-9341 3126 Truck 300HP 860 lb-ft, 2200 RPM ER Date Code SEP02
Interlock Code = 250
Replaced 225-2368

HEP07580 & UP
230-1562 3126 Truck 300HP 860 lb-ft, 2200 RPM RV Date Code OCT02
Interlock Code = 297

HEP1 – HEP07579
227-9342 3126 Truck 300HP 800 lb-ft, 2200 RPM ER Date Code SEP02
Interlock Code = 249
Replaced 225-2369

HEP07580 & UP
230-1563 3126 Truck 300HP 800 lb-ft, 2200 RPM ER Date Code OCT02
Interlock Code = 296

HEP1 – HEP07579
227-9343 3126 Truck 275HP 860 lb-ft, 2200 RPM ER Date Code SEP02
Interlock Code = 248
Replaced 225-2370

HEP07580 & UP
230-1564 3126 Truck 275HP 860 lb-ft, 2200 RPM ER Date Code OCT02
Interlock Code = 295

HEP1 – HEP07579
227-9344 3126 Truck 275HP 800 lb-ft, 2200 RPM ER Date Code SEP02
Interlock Code = 247
Replaced 225-2371

HEP07580 & UP
230-1565 3126 Truck 275HP 800 lb-ft, 2200 RPM ER Date Code OCT02
Interlock Code = 294

*******************************************************************
Recreational Vehicle Ratings

Serial No.Range
Part Number
Interlock Code Rating/Application Information
*******************************************************************
HEP1 – HEP07579
227-9340 3126 Truck 330HP 860 lb-ft, 2400 RPM RV Date Code SEP02
Interlock Code = 252
Replaced 225-2367

HEP07580 & UP
230-1561 3126 Truck 330HP 860 lb-ft, 2400 RPM RV Date Code OCT02
Interlock Code = 299

*******************************************************************
Truck Ratings
Serial No.Range
Part Number
Interlock Code Rating/Application Information
*******************************************************************
HEP1 – HEP07579
227-9345 3126 Truck 300HP 860 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 246
Replaced 225-2372

HEP07580 & UP
230-1566 3126 Truck 300HP 860 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 293

HEP1 – HEP07579
227-9346 3126 Truck 300HP 800 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 245
Replaced 225-2373

HEP07580 & UP
230-1567 3126 Truck 300HP 800 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 292

HEP1 – HEP07579
227-9347 3126 Truck 275HP 860 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 244
Replaced 225-2374

HEP07580 & UP
230-1568 3126 Truck 275HP 860 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 291

HEP1 – HEP07579
227-9348 3126 Truck 275HP 800 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 243
Replaced 225-2375

HEP07580 & UP
230-1569 3126 Truck 275HP 800 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 290

HEP1 – HEP07579
227-9349 3126 Truck 250HP 800 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 242
Replaced 225-2376

HEP07580 & UP
230-1570 3126 Truck 250HP 800 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 289

HEP1 – HEP07579
227-9350 3126 Truck 250HP 660 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 241
Replaced 225-2377

HEP07580 & UP
230-1571 3126 Truck 250HP 660 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 288

HEP1 – HEP07579
227-9351 3126 Truck 230HP 660 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 240
Replaced 225-2378

HEP07580 & UP
236-2149 3126 Truck 230HP 540 lb-ft, 2300 RPM Date Code MAR03
Interlock Code = 239

HEP07580 & UP
230-1572 3126 Truck 230HP 660 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 287

HEP1 – HEP07579
227-9352 3126 Truck 210HP 605 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 257
Replaced 225-2380

HEP07580 & UP
230-1573 3126 Truck 210HP 605 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 286

HEP1 – HEP07579
227-9353 3126 Truck 210HP 520 lb-ft, 2200 RPM Date Code SEP02
Interlock Code = 256
Replaced 225-2380

HEP07580 & UP
230-1574 3126 Truck 210HP 520 lb-ft, 2200 RPM Date Code OCT02
Interlock Code = 285

HEP1 & UP
227-9354 3126 Truck 210HP 520 lb-ft, 2400 RPM Date Code SEP02
High Performance Interlock Code = 255
Replaced 225-2381

HEP1 & UP
227-9355 3126 Truck 190HP 520 lb-ft, 2300 RPM Date Code SEP02
High Performance Interlock Code = 254
Replaced 225-2382

HEP1 & UP
227-9356 3126 Truck 190HP 420 lb-ft, 2400 RPM Date Code SEP02
Interlock Code = 253
Replaced 225-2383
================================================================================
C7C9 On-Highway Engine Flash files
Updated December 20, 2010
*************************************************************************************

IMPORTANT: It is very important to select the CORRECT flash file for the injector part
number that is in the engine!!! Engines that have the “factory installed injector p/n”
can use the flash file for the s/n range listed. However, for the s/n ranges noted
below, if a “single” injector is replaced “all six” injectors MUST be updated to the
same part number and the appropriate “flash file” and “etrim” files MUST be installed
to match the “new” part number injector!
Please refer to Truck Engine News SEBD6764 dated January 2004
Please check for rerateability using the rerate charts at https://truck.cat.com
*************************************************************************************
C7 (2007 Emissions A4 ECM) “Mid HP Ratings” 190HP to 300HP:
*************************************************************************************
C7S0001-up Date Code Interlock Flash File
*************************************************************************************
C7 190HP @ 2500 RPM JUL08 40/140 334-2353
Replaced 308-5717,309-1838,312-4768,313-9518,
316-7964,319-5927,321-7212,324-7626.326-9115,
328-0693

C7 210HP @ 2500 RPM Dec10 41/141 348-5528
Replaced 308-5718,309-1839,312-4769,313-9519,
316-7965,319-5928,321-7213,324-7627,326-9116,
328-0694,334-2354

C7 210HP @ 2500 RPM JUL08 42/142 334-2355
Replaced 308-5719,309-1840,312-4770,313-9520,
316-7966,319-5929,321-7214,324-7628,326-9117,
328-0695

C7 230HP @ 2500 RPM JUL08 43/143 334-2356
Replaced 308-5720,309-1841,312-4771,313-9521,
316-7967,319-5930,321-7215,324-7629,326-9118,
328-0696

C7 230HP @ 2500 RPM JUL08 44/144 334-2357
Replaced 300-1766,307-8355,309-1842,312-4772
313-9522,316-5997,316-7968,319-5931,321-7216,
324-7630326-9119,328-0697

C7 230HP @ 2400 RPM JUL08 45/145 334-2358
Replaced 300-1768,308-5721,309-1843,312-4773
313-9523,316-7969,319-5932,321-7217,324-7631,
326-9120,328-0698

C7 250HP @ 2400 RPM JUL08 46/146 334-2359
Replaced 308-5722,309-1844,312-4774
313-9524,316-7970,319-5933,321-7218,324-7632,
326-9121,328-0699

C7 250HP @ 2400 RPM JUL08 47/147 334-2360
Replaced 308-5723,309-1845,312-4775
313-9525,316-7971,319-5934,321-7219,324-7633,
326-9122,328-0700

C7 275HP @ 2400 RPM JUL08 48/148 334-2361
Replaced 308-5724,309-1846,312-4776
313-9526,316-7972,319-5935,321-7220,324-7634,
326-9123,328-0701

C7 300HP @ 2400 RPM JUL08 49/149 334-2362
Replaced 300-1776,307-8356,309-1847,312-4777
313-9527,316-7973,319-5936,321-7221,324-7635,
326-9124,328-0702

C7 300HP @ 2400 RPM ER JUL08 50/150 334-2363
Replaced 312-4778,313-9528,316-7974,319-5937
321-7222,324-7636,326-9125,328-0703

C7 330HP @ 2400 RPM ER JUL08 51/151 334-2364
Replaced 312-4779,313-9529,316-7975,319-5938
321-7223,324-7637,326-9126,328-0704

C7 350HP @ 2400 RPM ER JUL08 52/152 334-2365
Replaced 312-4780,313-9530,316-7976,319-5939
321-7224,324-7638,326-9127,328-0705

C7 360HP @ 2400 RPM ER JUL08 57/157 334-2370
Replaced 322-4567,324-7643,326-9132,328-0710

C7 300HP @ 2400 RPM RV JUL08 53/153 334-2366
Replaced 312-4781,313-9531,316-7977,319-5940
321-7225,324-7639,326-9128,328-0706

C7 330HP @ 2400 RPM RV JUL08 54/154 334-2367
Replaced 312-4782,313-9532,316-7978,321-7226,
324-7640,326-9129,328-0707

C7 350HP @ 2400 RPM RV JUL08 55/155 334-2368
Replaced 312-4783,313-9533,316-7979,321-7227,
324-7641,326-9130,328-0708

C7 360HP @ 2400 RPM RV JUL08 56/156 334-2369
Replaced 313-9535,316–7980,321-7228,
324-7642,326-9131,328-0709

*************************************************************************************
C7 (KAL, SAP, WAX) “Low HP Ratings” 190HP to 210HP:

NOTE: C7 “Low HP Ratings” 190HP to 210HP KAL1-07985 were factory built with Injector
p/n 233-3536. If a “single” 233-3536 injector is replaced with a 243-4502 injector
w/seals (241-3238 p/n on injector… not serviced) then “all six” injectors MUST be
updated to the same part number and the appropriate flash file and “etrim” files MUST
be installed to match the “new” part number injector! Use list below to determine flash
file based on installed injector number!
*************************************************************************************
S/N Range Injector P/N Date Code Interlock Flash File
*************************************************************************************
C7 KAL 190HP 520 lb-ft …* Important see note above for complete detail
KAL 1 – 07985 w/ Factory installed 233-3536 Injectors APR04 IC 1 247-4649
REplaced 242-8316,243-4420
KAL1-07985 w/ “Field installed” 241-3238 Injectors SEP06 IC 25 300-0446
Replaced 248-7461,251-7438,
254-0804,259-5558,265-3311,277-5700,295-2303

KAL07986-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3238 Injectors SEP06 IC 25 300-0446
Replaced 248-7461,251-7438,
254-0804,259-5558,265-3311,277-5700,295-2303

C7 KAL 210HP 520 lb-ft …* Important see note above for complete detail
KAL 1 – 07985 w/ Factory installed 233-3536 Injectors APR04 IC 3 247-4648
Replaced 242-1847,243-4421
KAL1-07985 w/ “Field installed” 241-3238 Injectors SEP06 IC 26 300-0447
Replaced 248-7460,251-7439,
254-0805,259-5559,265-3312,277-5701,295-2304

KAL07986-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3238 Injectors SEP06 IC 26 300-0447
Replaced 248-7460,251-7439,
254-0805,259-5559,265-3312,277-5701,295-2304

C7 KAL 210HP 605 lb-ft …* Important see note above for complete detail
KAL 1 – 07985 w/ Factory installed 233-3536 Injectors APR04 IC 4 247-4647
Replaced 242-8317,243-4422
KAL1-07985 w/ “Field installed” 241-3238 Injectors SEP06 IC 27 300-0448
Replaced 248-7459,251-7440,
254-0806,259-5560,277-5702,295-2305

KAL07986-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3238 Injectors SEP06 IC 27 300-0448
Replaced 248-7459,251-7440,
254-0806,259-5560,277-5702,295-2305
************************************************************************************
C7 (KAL, SAP, WAX) “Mid HP Ratings” 230HP to 250HP 660lbft:

NOTE: C7 “Mid HP Ratings” 230HP to 250HP 660lbft KAL1-11870 were factory built with
Injector p/n 236-6011. If a “single” 236-6011 injector is replaced with a 243-4503
injector w/seals (241-3239 p/n on injector… not serviced) then “all six” injectors
MUST be updated to the same part number and the appropriate flash file and “etrim”
files MUST be installed to match the “new” part number injector! Use list below to
determine flash file based on installed injector number!

S/N Range Injector P/N Date Code Interlock Flash File
*************************************************************************************
C7 KAL 230HP 540 lb-ft …* Important see note above for complete detail
KAL 1 – 11870 w/ Factory installed 236-6011 Injectors APR04 IC 18 247-4646
Replaced 242-1845,243-4423

KAL1-11870 w/ “Field installed” 241-3239 Injectors SEP06 IC 28 300-0449
Replaced 248-7458,251-7441,
259-5561,265-3314,271-1678,277-5703,295-2306

KAL11871-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3239 Injectors SEP06 IC 28 300-0449
Replaced 248-7458,251-7441,
259-5561,265-3314,271-1678,277-5703,295-2306

C7 KAL 230HP 660 lb-ft …* Important see note above for complete detail
KAL 1 – 11870 w/ Factory installed 236-6011 Injectors APR04 IC 5 247-4645
Replaced 242-1844,243-4424

KAL1-11870 w/ “Field installed” 241-3239 Injectors SEP06 IC 29 300-0450
Replaced 248-7457,251-7442,
259-5563,265-3315,271-1679,277-5704,295-2307

KAL11871-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3239 Injectors SEP06 IC 29 300-0450
Replaced 248-7457,251-7442,
259-5563,265-3315,271-1679

C7 KAL 250HP 660 lb-ft …* Important see note above for complete detail
KAL 1 – 11870 w/ Factory installed 236-6011 Injectors APR04 IC 6 247-4644
Replaced 242-1843,243-4425

KAL1-11870 w/ “Field installed” 241-3239 Injectors AUG08 IC 30 335-8257
Replaced 248-7456,251-7443,
259-5564,265-3316,277-5705,295-2308,300-0451

KAL11871-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 241-3239 Injectors AUG08 IC 30 335-8257
Replaced 248-7456,251-7443,
259-5564,265-3316,277-5705,295-2308,300-0451
****************************************************************************************
C7 (KAL, SAP, WAX) “Hi HP Ratings” 250HP 800lbft to 330HP:

NOTE: C7 “Hi HP Ratings” 250HP 800lbft to 330HP KAL1-12897 were factory built with
Injector p/n 233-3535. If a “single” 233-3535 injector is replaced with a 241-3400
injector w/seals (238-8091 p/n on injector… not serviced) then “all six” injectors
MUST be updated to the same part number and the appropriate flash file and “etrim”
files MUST be installed to match the “new” part number injector! Use list below to
determine flash file based on installed injector number!

S/N Range Injector P/N Date Code Interlock Flash File
****************************************************************************************
C7 KAL 250HP @ 2200 800 lb-ft …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 7 247-4643
Replaced 245-0834

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 41 300-0465
Replaced 248-7641,251-7457,
254-0999,259-5609,265-3334,272-5324,295-2333

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 41 300-0465
Replaced 248-7641,251-7457,
254-0999,259-5609,265-3334,272-5324,295-2333

C7 KAL 275HP 800 lb-ft …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 8 247-4642
Replaced 245-0835

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 42 300-0464
Replaced 248-7640,251-7456,
254-0998,259-5608,265-3333,272-5323,295-2332

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 42 300-0464
Replaced 248-7640,251-7456,
254-0998,259-5608,265-3333,272-5323,295-2332

CARB (California Bus only) MAR04 IC 59 251-6210

C7 KAL 275HP 860 lb-ft …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 9 247-4640
Replaced 245-0837

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 43 300-0462
Replaced 248-7638,251-7454,
254-0996,259-5606,265-3331,272-5321,295-2330

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 43 300-0462
Replaced 248-7638,251-7454,
254-0996,259-5606,265-3331,272-5321,295-2330

C7 KAL 300HP 800 lb-ft …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 10 247-4638
Replaced 245-0839

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 44 300-0460
Replaced 248-7636,251-7452,
254-0994,259-5604,265-3329,272-5319,295-2328

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 44 300-0460
Replaced 248-7636,251-7452,
254-0994,259-5604,265-3329,272-5319,295-2328

CARB (California Bus only) MAR04 IC 60 251-6209

C7 KAL 300HP @ 2200 860 lb-ft …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 11 247-4636
Replaced 245-0841

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 45 300-0458
Replaced 248-7634, 251-7450, 254-0992,259-5602,
265-3326,272-5317,295-2326

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 45 300-0458
Replaced 248-7634, 251-7450, 254-0992,259-5602,
265-3326,272-5317,295-2326

C7 KAL 330HP 860 lb-ft (Truck) …* Important see note above for complete detail
KAL1-UP w/ “Field installed” 238-8091 Injectors SEP06 IC 53 300-0456
Replaced 248-7645,251-7448,
254-0990,259-5600,265-3323,272-5315,295-2324

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 53 300-0456
Replaced 248-7645,251-7448,
254-0990,259-5600,265-3323,272-5315,295-2324
****************************************************************************************
*********************************** EMERGENCY RATINGS (ER) ***************************
S/N Range Injector P/N Date Code Interlock Flash File
****************************************************************************************
C7 KAL 275HP 800 lb-ft (ER) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 12 247-4641
Replaced 245-0836

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 46 300-0463
Replaced 248-7639,251-7455,
254-0997,259-5607,265-3332,272-5322,295-2331

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 46 300-0463
Replaced 248-7639,251-7455,
254-0997,259-5607,265-3332,272-5322,295-2331

C7 KAL 275HP 860 lb-ft (ER) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 13 247-4639
Replaced 245-0838

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 47 300-0461
Replaced 248-7637,251-7453,
254-0995,259-5605,265-3330,272-5320,295-2329

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 47 300-0461
Replaced 248-7637,251-7453,
254-0995,259-5605,265-3330,272-5320,295-2329

C7 KAL 300HP 800 lb-ft (ER) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 14 247-4637
Replaced 245-0840

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 48 300-0459
Replaced 248-7635,251-7451,
254-0993,259-5603,265-3327,272-5318,295-2327

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 48 300-0459
Replaced 248-7635,251-7451,
254-0993,259-5603,265-3327,272-5318,295-2327

C7 KAL 300HP 860 lb-ft (ER) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 15 247-4635
Replaced 245-0842

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 49 300-0457
Replaced 248-7633,251-7449,
254-0991,259-5601,265-3324,272-5316,295-2325

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 49 300-0457
Replaced 248-7633,251-7449,
254-0991,259-5601,265-3324,272-5316,295-2325

C7 KAL 330HP 860 lb-ft (ER) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 16 247-4634
Replaced 245-0843

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 50 300-0455
Replaced 248-7632,251-7447,
254-0989,259-5599,265-3322,272-5314,295-2323

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 50 300-0455
Replaced 248-7632,251-7447,
254-0989,259-5599,265-3322,272-5314,295-2323

C7 KAL 350HP @ 2400 RPM (ER) SEP06 IC 54 300-0453
Replaced 272-1428,298-7453

****************************************************************************************
******************************** RECREATION VEHICLE (RV) *******************************
S/N Range Injector P/N Date Code Interlock Flash File
****************************************************************************************

C7 KAL 330HP 860 lb-ft (RV) …* Important see note above for complete detail
KAL 1 – 12897 w/ Factory installed 233-3535 Injectors APR04 IC 17 247-4633
Replaced 245-0844

KAL1-12897 w/ “Field installed” 238-8091 Injectors SEP06 IC 51 300-0454
Replaced 248-7631,251-7446,
254-0988,259-5598,265-3321,272-5313,295-2322

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 51 300-0454
Replaced 248-7631,251-7446,
254-0988,259-5598,265-3321,272-5313,295-2322

C7 KAL 350HP @ 2400 860 lb-ft (RV) …* Important see note above for complete detail
KAL1-UP w/ “Field installed” 238-8091 Injectors SEP06 IC 52 300-0452
Replaced 248-7630,251-7445,
254-0986,259-5597,265-3320,272-5312,295-2321

KAL12898-UP, SAP1-UP, WAX1-UP
w/ “Factory installed” 238-8091 Injectors SEP06 IC 52 300-0452
Replaced 248-7630,251-7445,
254-0986,259-5597,265-3320,272-5312,295-2321
****************************************************************************************
******************** Family of Medium Tactical Vehicle (FMTV) **************************
S/N Range Injector P/N Date Code Interlock Flash File
****************************************************************************************

C7 FML 275HP @ 2200 RPM 860 lb-ft (FMTV)
FML 1-UP w/ “Factory installed” 238-8091 Injectors NOV09 IC 55 353-8652
Replaced 248-7642,259-5595,266-4248,280-3274,
296-0076

C7 FMM 330HP @ 2400 RPM 860 lb-ft (FMTV)
FMM 1-UP w/ “Factory installed” 238-8091 Injectors NOV09 IC 56 353-8653
Replaced 248-7643,259-5596,266-4249,280-3275,
296-0077

C7 330HP @ 2600 RPM FMM 1-UP NOV09 IC 82 353-8655
Replaced 325-4611

C7 275HP @ 2600 RPM FML 1-UP NOV09 IC 83 353-8684
Replaced 330-4542

C7 350HP @ 2600 RPM JRT 1-UP NOV09 IC 80 355-2831
Replaced 286-5702,303-4272,335-9389,346-5217

C7 350HP @ 2400RPM-261KW (Bronco Tactical Vehicle) Mar09 IC 85 344-9633
Replaced N/A

C7 370HP @ 2600RPM-276KW (Bronco Tactical Vehicle) Aug09 IC 84 346-3689
Replaced 338-3672
***************************************************************************************
*******EURO III Rating for use in Europe only – not for North America use**************
C7 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************************
190 HP 2500 RPM 142 KW-EURO3 331-0117 71 APR08
Replaced 290-0419

210 HP 2500 RPM 157 KW-EURO3 331-0119 70 APR08
Replaced 290-0418

210 HP 2500 RPM 157 KW-EURO3 331-0118 72 APR08
Replaced 290-0420

230 HP 2400 RPM 172 KW-EURO3 331-0120 73 APR08
Replaced 290-0421

250 HP 2400 RPM 186 KW-EURO3 331-0121 74 APR08
Replaced 290-0422

275 HP 2400 RPM 205 KW-EURO3 331-0122 75 APR08
Replaced 290-0423

300 HP 2400 RPM 224 KW-EURO3 331-0123 76 APR08
Replaced 290-0424

330 HP 2400 RPM 246 KW-EURO3 331-0124 77 APR08
Replaced 290-0425
*********************************** C9 Files *****************************************
NOTE: C9 335HP and 350HP 9DG 1 -700 were factory built with Injector p/n 233-3534.
If a “single” 233-3534 injector is replaced with a 239-6871 Injector w/seals
(238-8092 p/n on injector… not serviced) then “all six” injectors
must be updated to the same part number and the appropriate flash file and “etrim”
Files must be installed to match the “new” part number injector. Use list below to
determine flash file based on installed injector number.

Reference Truck Engine News SEBD6774 November 2004
***************************************************************************************
S/N Range Injector P/N Date Code Interlock Flash File
***************************************************************************************
C9 MTB 285 HP @ 2100 RPM 890 lb-ft (Bus) JAN05 IC 20 270-9204
Replaced 246-4701,251-7416,265-2873

C9 MTB 330 HP @ 2100 RPM 1150 lb-ft (Bus) AUG07 IC 22 319-1842
HEV (Hybrid Electric Vehicle)
Replaced 255-1178,260-1435,286-9589

C9 MTB 330 HP @ 2100 RPM 1150 lb-ft (Bus) SEP04 IC 12 260-1438
MTB00001-00999
Replaced 242-8332,247-4650

C9 MTB 330 HP @ 2100 RPM 1150 lb-ft (Bus) FEB08 IC 21 326-2663
Replaced 246-4700, 251-7415,260-1449,
286-9588,319-1843

C9 9DG 335 HP @ 2100 RPM 1050 lb-ft (TRUCK)
9DG1-700 w/factory installed 233-3534 injectors OCT03 IC 10 247-4652
Replaced 242-1854

9DG1-700 w/field installed 238-8092 injectors MAR04 IC 18 252-0028

9DG1000-UP NOV06 IC 23 305-7997
Replaced 251-7420,260-1450,273-3788,
280-9032,292-5521,296-8233

C9 9DG 350 HP @ 2100 RPM 1100 lb-ft (TRUCK)
9DG1-700 w/factory installed 233-3534 injectors OCT03 IC 11 247-4651
Replaced 242-1852

9DG1-700 w/field installed 238-8092 injectors MAR04 IC 19 252-0029

9DG1000-UP JAN08 IC 24 324-7773
Replaced 251-7419,260-1451,273-3789,
280-9033,286-5300,296-8234,305-7998

C9 9DG 400 HP @ 2300 RPM NOV09 IC 39 355-2987
Replaced 275-2256

C9 9DG 400 HP @ 2200 RPM MAY05 IC 40 275-2257
Replaced N/A

C9 9DG 450 HP @ 2300 RPM Nov09 IC 41 355-2988
Replaced 275-2258

C9 9DG 370 HP @ 2100 RPM 1100 lb-ft (RV) MAR04 IC 30 253-0979
Replaced 251-7418

C9 9DG 400 HP @ 2100 RPM 1100 lb-ft (RV) SEP07 IC 25 320-0329
Replaced 249-9196,251-7418,258-2347,
265-2872,282-8992,289-1223,305-7972

C9 9DG 335 HP @ 2300 RPM 1050 lb-ft (ER) JAN07 IC 42 308-4885
Replaced 264-1214,292-5522

C9 9DG 350 HP @ 2300 RPM 1100 lb-ft (ER) JAN07 IC 43 308-4886
Replaced 264-1215

C9 9DG 400 HP @ 2300 RPM 1100 lb-ft (ER) SEP07 IC 31 320-0330
Replaced 258-2348,282-8993,290-9008,305-7973

C9 9DG 350 HP @ 2100 RPM 1100 lb-ft JAN08 IC 44 324-7772
PSO (Parts service only)
Replaced 293-4644,299-5079,305-7971

C9 LFR 400 HP @ 2300 RPM 1100 lb-ft OCT06 IC 45 303-1504
Defense and Federal Products
Replaced N/A

*************************************************************************************
C9 (2007 Emissions A4 ECM) “Mid HP Ratings” 300HP to 425HP:
*************************************************************************************
C9S0001-up Date Code Interlock Flash File
*************************************************************************************
C9 285HP @ 2200 RPM 890lb-ft JUN08 30/130 334-2371
Replaced 313-2608,313-9567,321-7469,324-7645,
328-0711

C9 335HP @ 2200 RPM 1150lb-ft JUN08 31/131 334-2372
Replaced 313-9568,321-7470,324-7646,328-0712

C9 335HP @ 2200 RPM 1150lb-ft JUN08 32/132 334-2373
Replaced 313-2610,313-9569,321-7471,324-7647,
328-0713

C9 350HP @ 2200 RPM 1250lb-ft JUN08 33/133 334-2374
Replaced 313-2611,313-9570,321-7472,324-7648,
328-0714

C9 365HP @ 2200 RPM 1250lb-ft JUN08 34/134 334-2375
Replaced 313-2612,313-9571,321-7473,324-7649,
328-0715

C9 400HP @ 2300 RPM 1250lb-ft (RV) JUN08 35/135 334-2376
Replaced 313-2613,313-9572,321-5296,321-7474,
324-7650,328-0716

C9 425HP @ 2300 RPM 1250lb-ft (RV) JUN08 37/137 334-2378
Replaced 313-2615,313-9574,321-5298,321-7476,
324-7652,328-0718

C9 425HP @ 2300 RPM 1350lb-ft (RV) JUN08 39/139 334-2380
Replaced 313-2617,313-9576,321-5300,321-7478,
324-7654,328-0720

C9 400HP @ 2300 RPM 1250lb-ft (FT) JUN08 36/136 334-2377
Replaced 313-2614,313-9573,321-5297,321-7475.
324-7651,328-0717

C9 425HP @ 2300 RPM 1250lb-ft (FT) JUN08 38/138 334-2379
Replaced 313-2616,313-9575,321-5299,321-7477,
324-7653,328-0719

C9 425HP @ 2300 RPM 1350lb-ft (FT) JUN08 40/140 334-2381
Replaced 313-2618,313-9577,321-5301,321-7479,
324-7655,328-0721

================================================================================
================================================================================
Skid Steer Loader / Multi Terrain Loader
SSL / MTL Auxiliary ECM flash file reference, updated April 24, 2003
************************************************************************
Sales Serial Flash File Release
Model No. Range Part No. Date
************************************************************************
216 4NZ1-up 228-3168 10/2002
226 5FZ1-UP 228-3168 10/2002
228 6BZ1-UP 228-3168 10/2002
236 4YZ1-UP 228-3168 10/2002
246 5SZ1-UP 228-3168 10/2002
248 6LZ1-UP 228-3168 10/2002
232 CAB1-UP 228-3168 10/2002
252 FDG1-UP 228-3168 10/2002
262 CED1-UP 228-3168 10/2002
242 CMB1-UP 228-3168 10/2002
247 CML1-UP 228-3168 10/2002
257 CMM1-UP 228-3168 10/2002
267 CMP1-UP 228-3168 10/2002
277 CNC1-UP 228-3168 10/2002
287 CNY1-UP 228-3168 10/2002

************************************************************************
Instructions:
Flash the ECM with the latest software using the Datalink port in the engine
compartment. In the configuration screen, it is necessary to set the following perameters to the proper values:
SALES MODEL NUMBER (select the sales model of the machine)

TWO SPEED MOTOR INSTALLATION STATUS (select ‘installed’ if the machine has the two speed option, select ‘not installed’ if the machine does not have the two speed option)

HYDRAULIC AUXILIARY JOYSTICK CONFIGURATION (select ‘PWM’ if the machine has a proportional handle, select ‘switch to ground’ if the machine has an on/off handle, select ‘off’ if the machine is not equipped with auxiliary control)
================================================================================
================================================================================
C-10/C-12/3176B LOW NOX FLASH FILE CROSS REFERENCE
C-10/C-12/3176B LOW NOX FLASH FILE CROSS REFERENCE
UPDATED December 21, 2000

The Low Nox Software files listed below have the same interlock codes as the
sta
ndard rating software for the specified engines with 300 added to the interlock
code.

LOW NOX EMISSIONS REBUILD SOFTWARE FOR ’98 IRON C-10/C-12 ADEM II
PARTS SERVICE ONLY (PSO)

’98 MY C-10 IRON

DESCRIPTION GOV S/N FLASH ITRLCK RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————-
305 HP 1800/2100 8YS1 – UP 191-9918 325 OCT 00
1150/1050 PT

305 HP 1800/2100 8YS1 – UP 191-9919 330 OCT 00
(208.5? FAN-ON TEMP)
1150/1050 PT

335 HP 1800/2100 8YS1 – UP 191-9921 326 OCT 00
1250/1350 PT

335 HP 1800/2100 8YS1 – UP 191-9922 331 OCT 00
(208.5? FAN-ON TEMP) 1250/1350 PT

335/370HP MT 1800 8YS1 – UP 191-9920 329 OCT 00
1250/1350 PT

350 HP 1800/2100 8YS1 – UP 191-9923 327 OCT 00
1350 PT

370 HP 1800 8YS1 – UP 191-9924 328 OCT 00
1350 PT

’98 MY C-12 IRON

DESCRIPTION GOV S/N FLASH ITRLCK RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————-
335 HP 2100 9NS1 – UP 191-9926 329 OCT 00
1550 PT

355 HP 1800/2100 9NS1 – UP 191-9928 324 OCT 00
1350 PT

355 HP 1800 9NS1 – UP 191-9927 331 OCT 00
(208.5? FAN-ON TEMP) 1350 PT

355/410 MT 1800/2100 9NS1 – UP 191-9937 327 OCT 00
1350/1450/1550 PT

380 HP 1800/2100 9NS1 – UP 191-9930 321 OCT 00
1450 PT

380/410 MT 1800 9NS1 – UP 191-9935 328 OCT 00
1450/1550 PT

380/430 MT 1800 9NS1 – UP 191-9938 322 OCT 00
1450/1650 PT

380/430 MT 1800 9NS1 – UP 191-9936 322 OCT 00
(SERVICES 153-8417 – TOP 2 GEARS ONLY – MS CARRIERS CUSTOMER ONLY)
1450/1650 PT

395 HP 2100 9NS1 – UP 191-9931 325 OCT 00
1450 PT

410 HP 1800/2100 9NS1 – UP 191-9932 326 OCT 00
1450/1550 PT

425 HP 2100 9NS1 – UP 191-9934 330 OCT 00
(EMERGENCY VEHICLE, RV, AND BUS ONLY) 1450/1550 PT

430 HP 1800/2100 9NS1 – UP 191-9933 316 OCT 00
1650 PT

455 HP 2100 9NS1 – UP 191-9929 320 OCT 00
(EMERGENCY VEHICLE, RV, AND BUS ONLY) 1550 PT

LOW NOX REBUILD SOFTWARE – PARTS SERVICE ONLY (PSO)

’97 MY C-10 IRON
DESCRIPTION GOV S/N FLASH ITRLCK RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
280 HP 1800 2PN1 – UP 190-0224 305 DEC 99
280 HP 2100 2PN1 – UP 190-0225 306 DEC 99

305 HP 1800 2PN1 – UP 190-0226 307 DEC 99
305 HP 2100 2PN1 – UP 190-0227 308 DEC 99
305 HP 1800 2PN1 – UP 190-0231 307 DEC 99
(208.5Œ FAN-ON TEMP)

325 HP 1800 2PN1 – UP 190-0229 310 DEC 99
(FIELD UPRATE FOR 280 OR 305 HP IRON)

325 HP 2100 2PN1 – UP 190-0228 309 DEC 99

335 HP 1800 2PN1 – UP 190-0221 302 DEC 99
335 HP 1800 2PN1 – UP 190-0230 302 DEC 99
(208.5Œ FAN-ON TEMP)

335/370HP MT 1800 2PN1 – UP 190-0223 304 DEC 99

350 HP 1800 2PN1 – UP 190-0220 301 DEC 99

370 HP 1800 2PN1 – UP 190-0222 303 DEC 99

LOW NOX REBUILD SOFTWARE – PARTS SERVICE ONLY (PSO)

’97 MY C-12 IRON
DESCRIPTION GOV S/N FLASH ITRLCK RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
335 HP 2100 1YN1 – UP 190-0241 315 DEC 99

355 HP 1800 1YN1 – UP 190-0233 302 DEC 99

355 HP 1800 1YN1 – UP 190-0242 323 DEC 99
(208.5Œ FAN-ON TEMP)

355/410HP MT 1800 1YN1 – UP 190-0235 304 DEC 99

360 HP 2100 1YN1 – UP 190-0238 307 DEC 99

380 HP 1800 1YN1 – UP 190-0234 303 DEC 99

380/410HP MT 1800 1YN1 – UP 190-0236 305 DEC 99

390 HP 2100 1YN1 – UP 190-0239 308 DEC 99

410 HP 1800 1YN1 – UP 190-0232 301 DEC 99
410 HP 2100 1YN1 – UP 190-0237 306 DEC 99

425 HP 2100 1YN1 – UP 190-0240 309 DEC 99
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

3176B LOW NOX REBUILD SOFTWARE – PARTS SERVICE ONLY (PSO)

DESCRIPTION GOV S/N FLASH ITRLCK RELEASE
SPEED RANGE FILE CODE DATE

275 HP 1800 9CK1 – UP 188-8079 304 DEC 99
(STANDARD)
188-8091 304 DEC 99
(208.5ŒF FAN-ON TEMP)

300 HP 1800 9CK1 – UP 188-8080 305 DEC 99

325 HP 1800 9CK1-18308 188-8081 302 DEC 99

325 HP 1800 9CK18309-UP 188-8086 326 DEC 99

325/350 HP 1800 9CK18309-UP 188-8087 327 DEC 99
MULTI TORQUE

335/365 HP 1800 9CK1 – UP 188-8084 313 DEC 99
MULTI TORQUE

342 HP 1800 9CK1 – UP 188-8085 312 DEC 99
(OIL FIELD ONLY)

350 HP 1800 9CK1 – UP 188-8082 301 DEC 99

365 HP 1800 9CK1 – UP 188-8083 309 DEC 99

300 HP (2T7318) 1800 9CK1 – UP 188-8088 334 DEC 99
(FIELD UPRATE ONLY! W/ 275 HP IRON)

350 HP (2T7314) 1800 9CK1-18308 188-8089 335 DEC 99
(FIELD UPRATE ONLY! W/ 325 HP IRON)

365 HP (2T7316) 1800 9CK18309-UP 188-8090 336 DEC 99
(FIELD UPRATE ONLY! W/ 325 HP OR 350 HP IRON)
================================================================================
RUCK, MACHINE, AND COMMERCIAL ENGINES
Updated January 15, 2008 ajk

C-10 TRUCK 2001 MY – CLEAN POWER
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
305 HP 1800/2100 3CS23000 – UP 215-7354 20 JAN02
1050/1150 PT

335 HP 1800/2100 3CS23000 – UP 215-7355 21 JAN02
1250 PT

350 HP 1800/2100 3CS23000 – UP 270-7024 22 APR05
1350 PT
REPLACED 215-7357,237-0713,
241-0760,251-1818

370 HP 1800 3CS23000 – UP 215-7358 23 JAN02
1350 PT

335/370 HP MT 1800 3CS23000 – UP 215-7359 24 JAN02
1250/1350 PT

C-10 TRUCK 2000 MY – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
—————————————————————————
305 HP 1800/2100 3CS12000 – 22999 270-7006 10 APR05
REPLACED 220-6615,237-0699,
241-0759,251-1761

335 HP 1800/2100 3CS12000 – 22999 220-6617 11 MAR02

350 HP 1800/2100 3CS12000 – 22999 220-6619 12 MAR02

370 HP 1800 3CS12000 – 22999 220-6620 13 MAR02

335/370 HP MT 1800 3CS12000 – 22999 220-6622 14 MAR02

C-10 TRUCK ’99 MY – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
305 HP 1800/2100 3CS1 – 11999 215-7806 6 MAR02

335 HP 1800/2100 3CS1 – 11999 215-7807 2 MAR02

350 HP 1800/2100 3CS1 – 11999 215-7808 4 MAR02

370 HP 1800 3CS1 – 11999 215-7809 5 MAR02

335/370 HP MT 1800 3CS1 – 11999 215-7810 3 MAR02

Note: The LOW NOx FLASH files each have an personality module code which has been incremented by 300, compared to the interlock code of the original production FLASH file it is replacing. For example, FLASH file 185-1177,
with a personality module code of 333, replaces the DEC98 PSO FLASH file 170-8128, which had a personality module code of 33.

C-10 TRUCK – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
305 HP 1800/2100 8YS1 – UP 191-9918 325 OCT00
(Replaces 191-2810)

305 HP 1800/2100 8YS1 – UP 191-9919 330 OCT00
(208.5° FAN-ON TEMP)(Replaces 191-2811)

335 HP 1800/2100 8YS1 – UP 191-9921 326 OCT00
(Replaces 191-2812)

335 HP 1800/2100 8YS1 – UP 191-9922 331 OCT00
208.5° FAN-ON TEMP)(Replaces 191-2813)

335/370HP MT 1800 8YS1 – UP 191-9920 329 OCT00
(Replaces 191-2817)

350 HP 1800/2100 8YS1 – UP 191-9923 327 OCT00
(Replaces 191-2814)

350 HP 1800/2100 8YS1 – UP 191-9925 327 OCT00
(208.5°F FAN-ON TEMP Replaces 191-2815)

370 HP 1800 8YS1 – UP 191-9924 328 OCT00
(Replaces 191-2816)

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
280 HP 1800 2PN1 – UP 190-0224 305 DEC99
(Replaces 170-8077)

280 HP 2100 2PN1 – UP 190-0225 306 DEC99
(Replaces 170-8078)

305 HP 1800 2PN1 – UP 190-0226 307 DEC99
(Replaces 170-8079)

305 HP 2100 2PN1 – UP 190-0227 308 DEC99
(Replaces 170-8080)

305 HP 1800 2PN1 – UP 190-0231 307 DEC99
(208.5? FAN-ON TEMP)(Replaces 170-8084)

325 HP 1800 2PN1 – UP 190-0229 310 DEC99
(FIELD UPRATE FOR 280 OR 305 HP IRON)
(Replaces 170-8082)

325 HP 2100 2PN1 – UP 190-0228 309 DEC99
(Replaces 170-8081)

335 HP 1800 2PN1 – UP 190-0221 302 DEC99
(Replaces 170-8074)

335 HP 1800 2PN1 – UP 190-0230 302 DEC99
(208.5? FAN-ON TEMP)(Replaces 170-8083)

335/370HP MT 1800 2PN1 – UP 190-0223 304 DEC99
(Replaces 170-8076)

350 HP 1800 2PN1 – UP 190-0220 301 DEC99
(Replaces 170-8073)

370 HP 1800 2PN1 – UP 190-0222 303 DEC99
(Replaces 170-8075)

C-12 TRUCK 2001 MY – CLEAN POWER
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————-
335 HP 2100 2KS72000 – UP 215-7360 50 JAN02
1550 PT

355 HP 1800/2100 2KS72000 – UP 215-7361 51 JAN02
1350 PT

380 HP 1800/2100 2KS72000 – UP 338-5263 52 OCT08
1450 PT
Replaced 215-7362,237-0714,
241-0766,251-1820,270-7026

395 HP 1800/2100 2KS72000 – UP 338-5260 53 OCT08
1450 PT
Replaced 215-7363,236-1023,
241-0765,251-1819,270-7025

355/410 MT 1800/2100 2KS72000 – UP 270-7031 54 APR05
1350/1450/1550 PT
Replaced 215-7364,241-0774,251-1825

380/410 MT 1800 2KS72000 – UP 270-7032 55 APR05
1450/1550 PT
Replaced 215-7365,241-0775,251-1826

410 HP 1800/2100 2KS72000 – UP 338-5262 56 OCT08
1450/1550 PT
Replaced 215-7366,237-9263,
241-0773,251-1824,270-7030,296-6024

425 HP 2100 2KS72000 – UP 215-7367 57 JAN02
1450/1550 PT
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

380/430 MT 1800 2KS72000 – UP 338-5264 58 OCT08
1450/1650 PT
Replaced 215-7368,237-0715,
241-0767,251-1821,270-7027

430 HP 1800/2100 2KS72000 – UP 338-5261 59 OCT08
1650 PT
Replaced 215-7369,237-0716,
241-0768,251-1822,270-7028

455 HP 2100 2KS72000 – UP 215-7370 60 JAN02
1550 PT
EMERGENCY VEHICLE,RV AND BUS ONLY

505 HP 2100 2KS72000 – UP 270-7029 61 APR05
1550 PT
RV/FT
Replaced 215-7373,226-2039,
237-0717,241-0769,251-1823

C-12 TRUCK 2000 MY – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————–
335 HP 2100 2KS40000 – 71999 220-6623 20 MAR02

355 HP 1800/2100 2KS40000 – 71999 220-6624 21 MAR02

380 HP 1800/2100 2KS40000 – 71999 270-7011 22 APR05
1450 PT
REPLACED 220-6625,237-0700,
241-0762,251-1766

395 HP 1800/2100 2KS40000 – 71999 220-6627 23 MAR02

355/410 MT 1800/2100 2KS40000 – 71999 270-7012 24 APR05
Replaced 220-6629,237-0701,
241-0763,251-1767

380/410 MT 1800 2KS40000 – 71999 220-6630 25 MAR02

410 HP 1800/2100 2KS40000 – 71999 220-6631 26 MAR02

425 HP 2100 2KS40000 – 71999 220-6632 27 MAR02
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

380/430 MT 1800 2KS40000 – 71999 270-7014 28 APR05
Replaced 220-6633,237-9262,
241-0772,251-1769

430 HP 1800/2100 2KS40000 – 71999 270-7013 29 APR05
1650 PT
REPLACED 220-6634,237-0702,
241-0764,251-1768

455 HP 2100 2KS40000 – 71999 220-6635 30 MAR02
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

505 HP 2100 2KS40000 – 71999 220-6636 31 MAR02
1550 PT
RV/FT

C-12 TRUCK ’99 MY – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED F RANGE FILE CODE DATE

335 HP 2100 2KS1 – 39999 215-7811 11 MAR02

355 HP 1800/2100 2KS1 – 39999 215-7812 12 MAR02

380 HP 1800/2100 2KS1 – 39999 270-7010 4 APR05
Replaced 215-7813,241-0776,251-1765

355/410 MT 1800/2100 2KS1 – 39999 215-7817 3 MAR02

380/410 MT 1800 2KS1 – 39999 215-7818 9 MAR02

380/430 MT-4 1800 2KS1 – 39999 270-7009 10 APR05
(STANDARD RATING OR MT-4)
Replaced 215-7820,215,241-0771,251-1764

380/430 MT-2 1800 2KS1 – 39999 270-7008 14 APR05
Replaced 215-7819, 241-0770,251-1763

395 HP 1800/2100 2KS1 – 39999 215-7815 6 MAR02

410 HP 1800/2100 2KS1 – 39999 215-7816 7 MAR02

430 HP 1800/2100 2KS1 – 39999 270-7007 8 APR05
1650 PT
REPLACED 215-7822,237-0688,241-0761,251-1762

425 HP 2100 2KS1 – 39999 215-7821 15 MAR02
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

455 HP 2100 2KS1 – 39999 215-7823 16 MAR02
(EMERGENCY VEHICLE, RV, AND BUS ONLY)

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
335 HP 2100 9NS1 – UP 191-9926 329 OCT00
(Replaces 191-2818)

355 HP 1800/2100 9NS1 – UP 191-9928 324 OCT00
(Replaces 191-2819)

355 HP 1800 9NS1 – UP 191-9927 331 OCT00
(208.5? FAN-ON TEMP)(Replaces 191-2820)

355/410 MT 1800/2100 9NS1 – UP 191-9937 327 OCT00
(Replaces 191-2827)

380 HP 1800/2100 9NS1 – UP 191-9930 321 OCT00
(Replaces 191-2821)

380/410 MT 1800 9NS1 – UP 191-9935 328 OCT00
(Replaces 191-2828)

380/430 MT 1800 9NS1 – UP 191-9938 322 OCT00
(Replaces 191-3727)

380/430 MT 1800 9NS1 – UP 191-9936 322 OCT00
(SERVICES 153-8417 – TOP 2 GEARS ONLY – MS CARRIERS CUSTOMER ONLY)
(Replaces 168-7029)

395 HP 2100 9NS1 – UP 191-9931 325 OCT00
(Replaces 191-2822)

410 HP 1800/2100 9NS1 – UP 191-9932 326 OCT00
(Replaces 191-2823)

425 HP 2100 9NS1 – UP 191-9934 330 OCT00
(EMERGENCY VEHICLE, RV, AND BUS ONLY)(Replaces 191-2824)

430 HP 1800/2100 9NS1 – UP 191-9933 316 OCT00
(Replaces 191-2825)

455 HP 2100 9NS1 – UP 191-9929 320 OCT00
(EMERGENCY VEHICLE, RV, AND BUS ONLY) (Replaces 191-2826)

DESCRIPTION GOV S/N FLASH P/M RELEASE
TORQUE SPEED RANGE FILE CODE DATE
————————————————————————
335 HP 1550 LB-FT 2100 1YN1 – UP 190-0241 315 DEC99
Replaced 170-8094

355 HP 1350 LB-FT 1800 1YN1 – UP 190-0233 302 DEC99
Replaced 170-8086

355 HP 1350 LB-FT 1800 1YN1 – UP 190-0242 323 DEC99
(208.5? FAN-ON TEMP)
Replaced 170-8095

355/410HP MT 1800 1YN1 – UP 190-0235 304 DEC99
1350/1450/1550 LB-FT
Replaced 170-8088

360 HP 1350 LB-FT 2100 1YN1 – UP 190-0238 307 DEC99
Replaced 170-8091

380 HP 1450 LB-FT 1800 1YN1 – UP 190-0234 303 DEC99
Replaced 170-8087

380/410HP MT 1800 1YN1 – UP 190-0236 305 DEC99
1450/1550 LB-FT
Replaced 170-8089

390 HP 1450 LB-FT 2100 1YN1 – UP 190-0239 308 DEC99
Replaced 170-8092

410 HP 1800 1YN1 – UP 190-0232 301 DEC99
1450/1550 LB-FT
Replaced 170-8085

410 HP 2100 1YN1 – UP 190-0237 306 DEC99
1450/1550 LB-FT
Replaced 170-8090

425 HP 2100 1YN1 – UP 190-0240 309 DEC99
1450/1550 LB-FT
(EMERGENCY VEHICLE, RV, AND BUS ONLY)
Replaced 170-8093

C-10/C-12 CLEAN POWER WITH AIR INLET SHUTOFF
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
335 HP 1800/2100 3CS23000 – UP 224-4619 26 AUG02
1250 PT
Replaced 215-7356,224-0816

410 HP 1800/2100 2KS72000 – UP 215-7371 63 JAN02
1450/1550 PT

410 HP 1800/2100 2KS72000 – UP 224-4620 67 AUG02
1450/1550 PT
Replaced 224-0817

430 HP 1800/2100 2KS72000 – UP 215-7372 62 JAN02
1650 PT

430 HP 1800/2100 2KS72000 – UP 224-4621 66 AUG02
1650 PT REPLACED 224-0818

C-10/C-12 WITH AIR INLET SHUTOFF
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
335 HP 1800/2100 3CS12000-22999 220-6618 15 MAR02
1250 PT

335 HP 1800/2100 3CS12000-22999 224-4616 17 AUG02
1250 PT REPLACED 224-0813

410 HP 1800/2100 2KS40000-71999 220-6637 35 MAR02
1450/1550 PT

410 HP 1800/2100 2KS40000-71999 224-4617 37 AUG02
1450/1550 PT REPLACED 224-0814

430 HP 1800/2100 2KS40000-71999 220-6638 34 MAR02
1650 PT

430 HP 1800/2100 2KS40000-71999 224-4618 36 AUG02
1650 PT REPLACED 224-0815

C-12 MTVR
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
355/410 MT 2100 9SM00001-1499 220-4351 18 APR02

355/410 MT 2100 9SM01500 – UP 220-4352 65 APR02
(Clean Power)

C13 TRUCK EURO3 (NOT FOR USE IN THE UNITED STATES)
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
380 HP 2100 JAM1 – UP 307-1467 66 DEC06
Replaced 273-8798,291-2044,295-1536

430 HP 2100 JAM1 – UP 307-1468 67 DEC06
Replaced 273-8799,291-2045,295-1537

470 HP 2100 JAM1 – UP 307-1469 68 DEC06
Replaced 273-8800,291-2046,295-1538
————————————————————————
C-10/C-12 TRUCK EURO II CERTIFIED (NOT FOR USE IN THE UNITED STATES)
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
325 HP 1900 8YS1 – UP 191-0986 44 MAR 00

365 HP 1900 8YS1 – UP 191-0987 46 MAR 00

335 HP 1900 9NS1 – UP 191-0988 37 MAR 00

380 HP 1900 9NS1 – UP 191-0989 38 MAR 00

410 HP 1900 9NS1 – UP 191-0990 39 MAR 00

C-10/C-12 TRUCK EURO II CERTIFIED (NOT FOR USE IN THE UNITED STATES)
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
325 HP 1900 8YS1 – UP 158-9979 33 FEB 98

350 HP 1900 8YS1 – UP 158-9981 34 FEB 98

365 HP 1900 8YS1 – UP 158-9983 35 FEB 98

335 HP 1900 9NS1 – UP 158-2023 32 FEB 98

380 HP 1900 9NS1 – UP 153-9616 33 FEB 98

410 HP 1900 9NS1 – UP 153-9618 34 FEB 98

C-12 TRUCK EURO III CERTIFIED (NOT FOR USE IN THE UNITED STATES)

430 HP 1900 229-2780 47 APR 03

430 HP 1900 250-2988 47 APR 03
For GREECE truck engines

C-10 TRUCK EURO II CERTIFIED (NOT FOR USE IN THE UNITED STATES)

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
325 HP 1900 2PN1 – UP 120-8935 12 APR 99

350 HP 1900 2PN1 – UP 120-8951 11 APR 99

365 HP 1900 2PN1 – UP 120-8922 13 APR 99

C-10 CNF TRUCK – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————-
335 HP (2000 MY) 1800/2100 3CS12000-22999 223-9987 11 APR 02

335 HP (1999 MY) 1800/2100 3CS1-11999 223-9986 2 APR 02

C-12 CNF TRUCK 2000 MY – EPA CERTIFIED

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————–
355 HP (1999 MY) 1800/2100 2KS00001 – 39999 223-9988 12 APR02

355 HP (2000 MY) 1800/2100 2KS40000 – 71999 223-9989 21 APR02

355 HP (2001 MY) 1800/2100 2KS72000 – UP 223-9992 51 APR02

355/410 HP (1999 MY) 1800/2100 2KS1 – 39999 223-9990 3 APR02

355/410 HP (2000 MY) 1800/2100 2KS40000 -71999 223-9991 24 APR02

355/410 HP (2001 MY) 1800/2100 2KS72000 – UP 223-9993 54 APR02

This Section is Industrail Engine with Truck Software

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
C13 440HP 2100 EMS1-UP 365-1096 205 Nov10
Replaced 312-3134
600HP 2100 PRM-Prefix 364-9748 206 Nov10
Replaced 340-1103,347-3441,355-9837

C-12 MT835/845 CHALLENGER

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
——————————————————————————-
349 HP 2100 BAM00001 – UP 228-3277 16 DEC02
REPLACED 224-5838

390 HP 2100 BBP00001 – UP 228-3278 17 DEC02
REPLACED 224-5839

349 HP 2100 Retrofit 240-8451 34 NOV04

CHALLENGER AGRICULTURAL TRACTOR
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
CH75D 340 HP 2100 7ZR1 – UP 126-0591 40 AUG96

CH85D 340/375 2100 6AR1 – UP 189-2131 39 MAR00
340/370/380 HP

CH65E 320 HP 2100 7ZR1 – UP 203-6416 16 DEC00

CH75E 350 HP 2100 7ZR1 – UP 203-6417 14 DEC00

CH85E 2100 6AR1 – UP 180-7277 14 AUG99
350/385 HP

CH95E 2100 6AR1 – UP 180-7279 12 OCT99
350/385/420 HP

CH95E 2100 6AR1937 – UP 180-7278 36 OCT99
350/385/420 HP

CLAAS CHALLENGER AGRICULTURAL TRACTOR
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
CH65E 320 HP 2100 7ZR1 – UP 203-6418 16 DEC00

CH75E 350 HP 2100 7ZR1 – UP 203-6419 14 DEC00

CH85E 2100 6AR1 – UP 180-7282 14 AUG99
350/385 HP

CH95E 2100 6AR1 – UP 180-7284 12 OCT99
350/385/420 HP

CH95E 2100 6AR1937- UP 180-7283 36 OCT99
350/385/420 HP

HYDRAULIC EXCAVATOR
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
345B 312 HP 2000 7ZR1 – UP 235-1784 37 FEB03
REPLACED 198-3337

345B II 344 HP 2000 7ZR1 – UP 235-1785 51 FEB03
REPLACED 205-3143

345B II 365 HP 2000 7ZR1 – UP 164-4574 52 NOV01
(CIPI Drill App.)

C13 345C ACERT STD 447-0877 3 AUG13
342 HP @ 1800 RPM
Replaced 235-8221,248-4824,255-0904
258-4514,264-1083,266-6525,271-8699
439-7180

C13 345C ACERT STD-LRC 447-0874 17 AUG13
342 HP @ 1800 RPM
Replaced 257-7696,266-6526,283-1957
439-7178

C13 345C ACEDRT HIHP 447-0873 1 AUG13
371 HP @ 1800 RPM
Replaced 220-5005,236-0583,248-4825,255-0905
258-4515,266-6527,271-8700,439-7177

C13 MACH – 345C ACERT-HIHP-LRC 447-0878 19 AUG13
371HP@1800RPM
Replaced 284-5475,439-7182

C13 MACH-345C DRILL APPL 439-7181 24 AUG13
440HP@1800RPM
Replaced 288-0330

365B 412 HP 2000 6AR1 – UP 235-1786 3 FEB03
REPLACED 174-9138

C13 MACH-349E HEX 449-5536 3 SEP13
428HP@1800RPM
Replaces 381-4853

C13 MACH-349E HEX
428HP 1800 421-8966 20 SEP12
Replaced 349-3007,360-0061,366-4350,379-6579,
384-4445,394-7218

C6.4 MACH 323D HEX PSO 441-0463 7 SEP13
157hp 1800rpm
Replaces

C6.4 MACH 320D HEX PSO 441-0512 8 SEP13
147hp 1800rpm
Replaces

3176C ADEM II MARINE

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
450 HP 2300 6BW1 – UP 227-3826 42 OCT02
REPLACED 216-2915

525 HP 2300 6BW1 – UP 227-3827 43 OCT02
REPLACED 216-2916

570 HP 2300 6BW1 – UP 227-3828 23 OCT02
REPLACED 216-2917

600 HP 2300 6BW1 – UP 227-3829 22 OCT02
REPLACED 216-2918

3196 ADEM II MARINE

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
340 HP 1800 2XR1 – UP 227-3831 2 OCT02
REPLACED 216-2919

385 HP 1800 2XR1 – UP 227-3832 1 OCT02
REPLACED 216-2920

450 HP 2100 2XR1 – UP 227-3833 48 OCT02
REPLACED 216-2921

490 HP 2300 2XR1 – UP 227-3834 45 OCT02
REPLACED 216-2922

570 HP 2300 2XR1 – UP 227-3835 42 OCT02
REPLACED 216-2923

600 HP 2300 2XR1 – UP 227-3836 44 OCT02
REPLACED 216-2924

660 HP 2300 2XR1 – UP 227-3837 38 OCT02
REPLACED 216-2925

C12 ADEM III “C” TIER, TIER II MEUI MARINE

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
340 HP 1800 9HP1 – UP 246-1141 26 MAR05
REPLACED 215-1498,
229-5802, 234-4956,243-0700

385 HP 1800 9HP1 – UP 246-1142 27 MAR05
REPLACED 215-1499,
229-5803, 234-4957,243-0701

450 HP 2100 9HP1 – UP 270-1823 28 FEB04
REPLACED 215-1500,229-5804,
234-4958,243-0702,246-1143

490 HP 2300 9HP1 – UP 246-1159 29 MAR05
REPLACED 215-1501,229-5805,234-4959

570 HP 2300 9HP1 – UP 246-1160 30 MAR05
REPLACED 215-1502,229-5806,234-4960

600 HP 2300 9HP1 – UP 246-1161 31 MAR05
REPLACED 215-1503,229-5807,234-4961

660 HP 2300 9HP1 – UP 234-4962 32 AUG03
REPLACED 215-1504,229-5808

700 HP 2300 9HP1 – UP 263-2561 33 MAR05
REPLACED 208-8511,229-5809,
234-4963,246-1162

705 HP 2300 286-5623 37 DEC05
REPLACED 273-7308

MARINE ENGINES
————————————————————————

C18 Marine-465BKW 60HZ 389-7967 182 AUG12
624 HP 1800
Replaced 370-1566

GENSET ENGINES
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
C9 EP-60Hz TIERIII/LOW-E 422-8047 OCT13
398 HP 1800 12
480 HP 1800 14
REPLACED 268-6639,277-5708,268-6640,317-0727
343-7228,383-8631,421-9060

C9 EP-REG ACERT 422-8049 OCT13
0HP@1500RPM 146
0HP@1800RPM 50
Replaces 268-6642,295-0018,345-8879,348-8768

C9 EP-REG ACERT 422-8048 OCT13
0HP@1500RPM 49
0HP@1800RPM
Replaces 268-6641,295-0019,345-8880

C9 MAR 50HZ-GENSET 394-5050 82 MAY13
0HP@1500RPM
Replaces 266-6499,308-5101,313-1947,
343-7083

C9 MAR-175EKW 60HZ-GEN SET 394-5051 83 MAY13
0HP@1800RPM
Replaced 266-6500,282-5095,292-2223
308-5110,343-7084

C9 MAR 60HZ-GENSET 394-5052 84 MAY13
0HP@1800RPM
Replaces 266-6501,282-5096,292-2224
308-5111,343-7085

C9 MAR 60HZ-GENSET 394-5053 85 MAY13
0HP@1800RPM
Replaced 266-6502,282-5097,292-2225
308-5112,343-7086

C9 MAR-250EKW 60HZ AUX 394-5059 55 MAY13
0HP@1800RPM
Replaces 242-7154,257-3280,288-1204
292-2228,308-5118,343-7092

C9 MAR-200EKW 50HZ-AUX 394-5056 52 MAY13
0HP@1500RPM
Replaces 242-7151,257-5173,308-5115
313-1948,343-7089

C9 MAR-175EKW 60HZ AUX 394-5057 53 MAY13
0HP@1800RPM
Replaces 242-7152,257-5174,288-2750
292-2226,308-5116,343-7090

C9 MAR-215EKW 60HZ AUX 394-5058 54 MAY13
0HP@1800RPM
Replaced 242-7153,257-5175,288-5925
292-2227,308-5117,343-7091

C13 EPG LOW BSFC 60HZ ENGINE 421-5509 94 MAR13
0HP @ 0RPM
Replaced

C13 EP LOW BSFC 50HZ 421-5507 93 MAR13
0HP @ 0RPM
Replaced

C13 EP-424KW 446-9469 113 OCT13
503HP@1800RPM
570HP@1800RPM
Replaced 422-8209,440-0161

C13 EP 50HZ INDIA
552HP@1500RPM

INDUSTRIAL ENGINES
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
3176C INDUSTRIAL
310 HP 2100 2AW1 – UP 165-1741 17 SEP98

325 HP 2100 2AW1 – UP 198-3090 32 AUG00

365 HP 2100 2AW1 – UP 213-8434 20 SEP01
REPLACED 183-7199

365 HP 2100 2AW1 – UP 187-0840 24 JAN00

400 HP 2100 2AW1 – UP 168-8832 49 MAR99

3196 INDUSTRIAL
420 HP 2100 1DW1 – UP 213-8435 18 SEP01
Replaced 180-6036

C9 MACH-336D HEX LRC 445-4922 193 AUG13
258HP@1600RPM, 286HP@1800RPM
Replaces 432-1199,442-8059

C9 HEX 336D ENGINE. 447-0860 91 JUL13
258 1600
286 1800
Replaced 223-9021,286-3114,291-2103,295-0583
310-7886,368-3881,377-0005,439-7155

C9 MACH-336D HEX 445-4972 194 SEP13
259HP@1600RPM
286HP@1800RPM
Replaced 439-2721

C9 HEX 336D ENGINE 447-0861 89 JUL13
259 1600
286 1800
Replaces 272-9620,275-5871,283-1725,289-2222
294-8712,310-7704,368-3024,399-6876,434-9481

C9 MACH-586 FP 430-7488 77 DEC12
350HP@1880RPM
Replaced 378-8239,387-5633,396-5543

C9 IND-261KW 448-4922 100 SEP13
350HP@1800RPM
Replaces 287-1746,307-9701,341-8283,360-8843
371-8849,379-4901

C9 IND-A/B TIER PSO 443-3006 OCT13
275 1800 171
275 2200 172
300 2200
Replaced

C9 IND-360HP LEXION 420-4251 163 DEC12
360HP@1900RPM
Replaced 357-1717,365-9494,366-7964,378-7532
385-1163,395-1106

C-9 MACH-973C 282-9433 9 AUG13
252HP@2000RPM
Replaces 201-1621,235-0976,246-1613
248-7629,257-7955,265-7894

C9.3 Industrial Claas Lexion Tier 4i 423-7016 75 DEC12
300HP 2200
Replaced 371-7705,378-3619,383-7685,385-1159
395-1105,420-4254

C9.3 Industrial Class Lexion Tier 4i 378-7530 164 Jul11
320HP 1900
Replaced 366-7961

C9 IND MEC A-B-C TIER 442-9426 SEP13
300HP@2200RPM 6
325HP@2200RPM 7
350HP@2200RPM 8
Replaces 380-9629,423-7836, 432-8397,440-3130

C9.3 IND-A/B/C TIER 434-6396 FEB13
300HP 2200 168
325HP 2200 169
350HP 2200 170
Replaced 422-6161,340-3618,362-1195,364-6433
365-1589,366-8310,375-2376,379-0975
378-7542,385-1166,395-1103,420-4249

C9.3 IND-A/B/C TIER 423-6599 DEC12
300HP 2200 165
325HP 2200 166
350HP 2200 167
Replaced 366-8306,360-6821,366-5104,373-3687
378-7359,385-1165,395-1102,420-4248

C9.3 IND D TIER 442-9544 9 SEP13
389HP@2200RPM
C9 IND-320HP CLAAS LEXION 419-6686 164 DEC12
320HP@1900RPM
Replaces 419-4835,431-1977,440-3138

Repaced 349-8891,350-1812,366-5963,366-7961
378-7530,383-7676,385-1160,395-1104

C9 IND-A/B/C TIER 442-8689 165 AUG13
300HP@2200RPM 166
325HP@2200RPM 167
350HP@2200RPM
Replaced 366-8306,360-6821,366-5104,373-3687
378-7539,385-1165,395-1102,420-4248,423-6599

C-10 INDUSTRIAL ” A & B” RATED, ADEM III,TIER II EMISSIONS
310/335 HP 2100 CRJ1 – UP 249-7373 10 JUN04
REPLACED 215-3236,229-0413,239-6847

C-10 INDUSTRIAL “C” RATED, ADEM III,WATER COOLED EXHAUST
MANIFOLD TIER II EMISSIONS
325 HP 2100 CRJ1 – UP 249-7377 13 JUN04
REPLACED 215-3240,229-0417

C-10 INDUSTRIAL “C” RATED, ADEM III,WATER COOLED EXHAUST
MANIFOLD TIER II EMISSIONS
335 HP 2100 CRJ1 – UP 249-7379 16 JUN04
REPLACED 215-3243,229-0419

C-10 INDUSTRIAL “C,D, & E” RATED, ADEM III,TIER II EMISSIONS
365/425 HP 2100 CRJ1 – UP 265-4273 11 SEP05
REPLACED 215-3237,229-0414,
239-6848,249-7374

C-10 INDUSTRIAL “C” RATED, ADEM III,AGRICULTURE,
TIER II EMISSIONS
365 HP 2100 CRJ1 – UP 249-7375 12 JUN04
REPLACED 215-3238,229-0415

C-10 INDUSTRIAL “D” RATED ADEM III,WATER COOLED EXHAUST
MANIFOLD, TIER II EMISSIONS
365 HP 2100 CRJ1 – UP 249-7378 14 JUN04
REPLACED 215-3241,229-0418

C-10 INDUSTRIAL “D” RATED ADEM III,AG CHEM,
TIER II EMISSIONS
400 HP 2100 CRJ1 – UP 249-7376 12 JUN04
REPLACED 215-3239,229-0416

3196 ADEM II INDUSTRIAL
420 HP 2100 1DW1 – UP 213-8435 18 SEP01
1200/1275/1350/1450/1575 PT

C-12 TQG-EP MILITARY ADEM III, TIER II EMISSIONS
292 HP 1800 BCY1 – UP 268-4723 20 DEC04
REPLACED 199-6931,213-1038,220-4578

C-12 INDUSTRIAL “A & B” RATED, ADEM III, TIER II EMISSIONS
370/400 HP 2100 BDL1 – UP 249-9780 18 JUN04
REPLACED 215-3242,229-0421

C-12 INDUSTRIAL “C,D,& E” RATED, ADEM III, TIER II EMISSIONS
425/505 HP 2100 BDL1 – UP 249-7381 19 JUN04
REPLACED 215-3243,229-0420,239-6849

C-12 INDUSTRIAL AGRICULTURE “C” RATED ADEM III,
TIER II EMISSIONS
425 HP 2100 BDL1 – UP 261-3285 21 JUL04
REPLACED 215-3244,229-0422,249-7382

C11 INDUSTRIAL ACERT
325 HP 1800 328-3912 10 MAR08
350 HP 1800 328-3912 11 MAR08
385 HP 1800 328-3912 4 MAR08
REPLACED 243-0453,282-9906

C11 INDUSTRIAL ACERT
420 HP 1800 282-9907 12 NOV05
450 HP 1800 282-9907 9 NOV05
REPLACED 253-3735,254-9997

C11 INDUSTRIAL ACERT
364 HP 2100 280-3519 8 SEP05
REPLACED 254-9998,266-4361

C11 MACH-MD5150 Track Drill
385 HP @ 1800RPM 445-8849 36 JUL13
Replaced by 417-0134,424-2438

C11 MACH – R1600H Load Haul Dump 444-0364 34 AUG13
279HP@1800RPM
Replaces 389-3152,418-0276,439-4534

C13 EP-350EKW 421-1570 21 DEC12
503HP@1800RPM, 568HP@1800RPM
Replaced 367-1998, 385-0319, 395-3684

C13 A IRON T4F A5:E2 AFT. 450-5585 N/A SEP13
0hp at 0 rpm
Replaces 387-4541,419-7839,444-0684,448-0034

C13 IND DE TIER, T4I PROD 6.0.7 PSO 449-1665 79 AUG13
475hp 2100rpm 80
520hp 2100rpm

C13 IND DE TIER 4F 442-9710 SEP13
475HP@2100RPM, 110
520HP@2100RPM 111
Replaces 392-3473,434-1881,440-2368

C13 IND ABC TIER 4F 442-9597 SEP13
385HP@2100RPM 107
416HP@2100RPM 108
440HP@2100RPM 109
Replaces 392-3471,434-0512,439-0508

C13 INDUSTRIAL ACERT
385 HP 1800 316-7313 11 JUN07
415 HP 1800 316-7313 12 JUN07
440 HP 1800 316-7313 4 JUN07
REPLACED 254-9989,267-3421,
282-9908,296-4327,312-1163

C13 IND-287/310/328KW ACERT
385 HP 2100 367-8486 85 Nov10
415 HP 2100 367-8486 86 Nov10
440 HP 2100 367-8486 87 Nov10
Replaced N/A

C13 IND-354 KW ACERT
475 HP 1800 320-8753 10 SEP07
520 HP 1800 320-8753 13 SEP07
REPLACED 253-1952,254-9990,282-9909

C13 IND-354 KW ACERT
475 HP 2100 367-8484 83 Nov10
520 HP 2100 367-8484 84 Nov10
REPLACED N/A

C13 INDUSTRIAL CLAAS ACERT
463 HP 2100 295-6288 6 JUN06
REPLACED 277-7524

C13 INDUSTRIAL CLAAS ACERT
463 HP 2100 276-3691 8 JUN05
REPLACED 254-9991,267-3422

C13 INDUSTRIAL CLAAS ACERT
400 HP 2100 276-5461 14 AUG05
REPLACED 254-9992,267-3423

C13 INDUSTRIAL AGCO ACERT
425 HP 2100 311-2457 9 MAR07
REPLACED 254-9993,267-3424,
271-5706,276-3692,282-0620,283-5807

C13 INDUSTRIAL CLAAS ACERT
425 HP 2100 295-6285 15 JUN06
REPLACED 254-9994,267-3425,
271-5707,276-3693,282-0621

C13 INDUSTRIAL CLAAS ACERT
425 HP 1900 309-8658 40 FEB07
REPLACED N/A

C13 INDUSTRIAL CLAAS ACERT
385 HP 2100 282-0622 16 SEP05
REPLACED 254-9995,274-4292

C13 INDUSTRIAL CLAAS LEXION Tier4i
443 HP 1900 420-4243 82 DEC12
REPLACED 366-7944,378-7544,350-1816,364-6745
384-9983,395-1110

C13 INDUSTRIAL CLAAS LEXION Tier4i
500 HP 1900 420-4244 81 DEC12
REPLACED 366-7942,378-7545,384-9981,395-1111

C13 INDUSTRIAL-A/B/C TIER4i
385 HP 2100 442-8691 76 DEC12
415 HP 2100 77 DEC12
440 HP 2100 78 DEC12
REPLACED 366-7821,373-3690,377-9505,378-7547
349-1367,359-8980,362-0219,366-3098,384-9573
395-1109,419-6671

C13 INDUSTRIAL-ABC TIER4i
475 HP 2100 434-6956 79 FEB13
520 HP 2100 80 FEB13
REPLACED 419-6212,366-7823,373-3689,378-7548,384-9979,350-4444
366-9532,394-0321

C13 Tier 4F Claas Lexion 503 HP 449-9208 101 SEP13
503HP@1900RPM
Replaces 379-2108,396-8919,399-6879
420-3307,431-1979,442-9980

C13 IND-456HP CLAAS LEXION 449-9209 106 SEP13
456HP@1900RPM
Replaced 392-1725,399-6880,431-1980,443-0006

C13 IND – 300KW 449-9220 105 SEP13
402HP@1900RPM
Replaced 391-8584,431-1999,443-0007

C-10 UNDERGROUND MINING

DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
310 HP 2100 2AW1 – UP 165-1741 17 SEP98

250/270 MT 2100 2AW1 – UP 222-9279 5 DEC02
Replaced 177-4902

270 HP 2100 2AW1 – UP 159-5259 37 JUN02

310 HP 2100 2AW1 – UP 159-5261 38 JUN98

335 HP 2100 2AW1 – UP 159-5263 39 JUN98

MACHINE ENGINES
DESCRIPTION GOV S/N FLASH P/M RELEASE
SPEED RANGE FILE CODE DATE
————————————————————————
3176C 163H
257 HP 2000 310-0996 8 MAR07
REPLACED 234-1220

3176C D7R SII
285 HP 2100 309-9698 19 APR07
REPLACED 252-4725,269-9416,282-1919

3176C CLAAS COMBINE 480/485
365 HP 2100 7ZR00269 – UP 207-4671 21 MAY01

C7 MG TIER III 12M 444-2010 89 AUG13
217HP@2000RPM
Replaces 398-2107

C7 MACH 950H MWL 437-8307 30 JUL13
219hp @ 1800rpm
Replaces 279-3462,288-2584,307-3086,314-8476
325-6444,353-2729,383-0726

C7 MACH-962H-ACERT 434-9488 5 JUL13
233hp @ 1800rpm
Replaces 247-0832,248-6218,276-8523,285-8780
286-7265,301-5244,314-8475,325-6445,353-2730,383-0727

C7 MACH-950K MWL 448-8825 51 OCT13
218HP@2150RPM
Replaces

C7 MACH-962K MWL 448-8826 52 OCT13
240HP@2150RPM
Replaces

C7 MACH – 950K MWL
218 HP 2150 438-7276 15 MAY13
Replaced 361-2200,363-5897,386-1363
394-7077

C7 MACH-950H 434-9487 6 JUL13
219hp @ 1800rpm
Replaced 247-0830,248-6217,276-8522,285-8779
286-7264,301-5234,314-8474,325-6255,353-2728,383-0725

C7 MACH-962K MWL 438-7277 16 MAY13
240HP@2150RPM
Replaced 361-2203,363-5842,386-1407
394-7078

C7.1 MACH CPPI AP10XX 452-8536 14 OCT13
249HP@2200RPM
Replaces

C7.1 IND-184KW 447-8672 28 OCT13
247HP@1800RPM
Replaces 364-5815,393-4670

C7.1 MACH-545/555 WSK FP 450-8062 13 OCT13
249HP@2200RPM
Replaces 433-2731

C7.1 MACH-950 MWL 448-5066 5 OCT13
225HP@2200RPM
Replaces

C7.1 MACH-950 MWL 448-5042 5 JUNE13
225HP@2200RPM
Replaces 441-3720

C7 MACH-573 WFB FP 432-8846 25 APR13
241HP @ 1800RPM
Replaced 366-7959,367-3834,382-0353,384-3720,388-6389
393-9372,421-1610,422-1043

C4.4 IND-81.5KW 448-5592 20 OCT13
109HP@1800RPM
Replaces 378-4569,394-7075

C4.4 1204E-E4 IND-129.1KW 448-5595 21 Oct13
173HP@1800RPM
Replaces 378-4575

C4.4 IND-129.1KW 448-5594 21 OCT13
173HP@1800RPM
Replaced 378-4573

C4.4 IND-81.5KW 448-5593 20 OCT13
109HP@1800RPM
Replaced 378-4571,394-7076

C4.4 EP GENSET 440-9719 27 JUL13
130HP@1500RPM, 157HP@1800RPM
Replaces 394-1493,301-7825,317-2540,322-8263
328-8421,340-4962,364-0525,374-2548,394-1493

C4.4 MACH 312/314F HEX 447-8240 7 SEP13
99HP@2000RPM
Replaces

C4.4 MACH-316E HEX 445-9591 5 OCT13
121HP@1950RPM
Replaces 370-8760,371-1134,380-7277,383-9946
393-1081,393-1596,417-4481

C4.4 MACH-CPPI 442-7982 101 SEP13
99HP@2200RPM
Replaced

C4.4 MACH CPPI 96KW 442-1347 76 June13
129HP@2200RPM
Replaced 388-9342

C4.4 MACH-CPPI 82.1KW 442-1348 75 June13
110HP@2200RPM
Replaced 390-3317,434-3979

C4.4 MACH CPPI 96KW ENGINE 442-1349 85 July13
129HP@2200RPM
Replaces 421-1636,426-2688

C4.4 MACH-CPPI 106KW 446-0265 14 OCT13
142HP@2200RPM
Replaces

C4.4 MACH-CPPI 129KW 443-6612 9 SEP13
173HP@2200RPM
Replaces

C4.4 MACH-CPPI ACOM 448-8841 5 SEP13
142HP@2200RPM
Replaces

C6.6 MACH-D6K TTT MLIT 443-8412 117 AUG13
152HP@2100RPM
Replaced 320-3720,344-2758,368-1460

C6.6 MACH-D6N TTT 453-1519 26 NOV13
173HP@2200RPM
Replaced 361-8083,374-2622,377-1481
389-7502,394-9578,417-2964,433-2152

C6.6 MACH D6N TTT 443-8410 114 AUG13
173HP@2200RPM
Replaces 344-7210,351-4529,354-1336
368-1462

C6.6 MACH D6N TTT 443-8409 110 AUG13
173HP@2200RPM
Replaces 321-5968,328-5405,344-7209
351-4530,354-1337,368-1461

C6.6 MACH CPPI 441-5014 131 June13
156HP@2200RPM
Replaces 388-9333

C6.6 MACH 129KW 442-1346 132 JUN13
173HP@2200RPM
Replaces 388-9342

C6.6 MACH-117KW CPPI 443-8404 46 AUG13
157HP@2200RPM
Replaces 313-3403,352-6524

C6.6 MACH-129KW CPPI 443-8405 47 AUG13
173HP@2200RPM
Replaced 313-1985,352-6516

C6.6 MACH-938/930/924 SWL 438-9599 MAY13
147HP@1800RPM 17
160HP@1800RPM 19
173HP@1800RPM 20
Replaces 371-4258,374-8047,382-2737,385-4846
387-6748,390-9119,418-1332,420-1689

C6.6 MACH- 930 SWL 443-8399 52 AUG13
152HP@2300RPM
Replaces 334-0404,334-7701,337-9428
348-9180,358-3240

C6.6 MACH-D6N 443-8407 18 AUG13
173HP@2200RPM
Replaces 289-2174,294-0059,301-8684
304-8417,307-0528,308-4282,320-3719
324-3308,368-3627

C6.6 MACH-D6N MLIT 443-8408 111 AUG13
173HP@2200RPM
Replaced 320-8754,344-2790,368-3628

C6.6 MACH-930 MLIT SWL 443-8400 70 AUG13
152HP@2300RPM
Replaces 297-1561,308-8422,316-6333,319-1673
333-7604,348-9179,358-3239

C6.6 MACH-924 MLIT-SWL 443-8401 93 AUG13
98HP@2300RPM
Replaces 334-0403,337-0491,348-9178,358-3238

C6.6 MACH-924 SWL 443-8402 67 AUG13
132HP@2300RPM
Replaces 303-9437,293-2368,308-4225,316-6327
333-7605,348-9177,358-3232,417-8571

C6.6 MACH – 120M MG 443-8403 122 AUG13
142HP@2000RPM
148HP@2000RPM
152HP@2000RPM
157HP@2000RPM
Replaces 371-8817

C6.6 MACH-953D TTL 443-8415 3 AUG13
0HP@0RPM
Replaces 309-6963,320-3721,344-2664,364-3636

C6.6 MACH-963D TTL 443-8413 4 AUG13
220HP@2000RPM
Replaced 291-1269,293-9935,305-0567
320-3722,344-2665,364-3635,386-9390

C6.6 MACH-963 AB&T TTL 443-8414 121 AUG13
224HP@2000RPM
Replaces370-1729,395-1902

C6.6 MACH 938 MWL ENGINE 443-8397 94 JUL13
197HP@2100RPM
Replaces 310-8864,334-1285,352-2417,356-7407
417-3523

C6.6 938 AB&T MWL T3 443-8398 123 JUL13
197HP@2100RPM
Replaces 370-9202,392-3468

C6.6 EP-SABRE MARINE TAG2 440-9716 105 AUG13
217HP@1800RPM
Replaces 318-0623,343-2978,350-3443,
374-2532,388-6449,416-8991

C7.1 MACH-120M3 MG 450-3934 20 OCT13
168HP@2000RPM
Replaces

C7.1 MACH SWL_Tier4f 451-6680 NOV13
153HP@1800RPM 10
164HP@1800RPM 11
88HP@1800RPM 12
Replaces 424-0781,433-8149,451-0007

C7.1 MACH 924/930/938 SWL 451-1959 SEP13
141HP 1800 1
160HP 1800 2
188HP 1800 3
Replaced 418-6757,424-0779,437-5735,446-1295

C7.1 MACH SWL_Tier4i_LRC 450-9932 SEP13
140HP@1800RPM 22
159HP@1800RPM 23
187HP@1800RPM 24
Replaces 446-8283

C7.1 MACH-CPPI AP6XX 451-7973 19 NOV13
202HP@2200RPM
Replaces 443-4197

C7.1 MACH – AP10xx Asphalt Paver Tier 4i
225 HP 2200 383-8633 21 JUL11
Replaced 360-7469,362-5278,367-3832,
373-4827,380-3098,380-8225

C7.1 MACH – AP10XX Asphalt Paver Tier4f
225HP 2200 448-9277 14 SEP13
Replaced 418-6738

C9 MACH-973D TTL 444-5241 103 OCT13
307HP@1900RPM
Replaces 293-4414,312-4407,333-6442
340-9850,362-3207,378-8068

C-12 CLAAS COMBINE 480/485
440 HP 2100 BDL00001 – UP 222-8533 23 MAY02

C-10 CLAAS COMBINE 470
365 HP 2100 231-9232 17 APR03

3176C R1700G LHD
335 HP 2100 8XZ00001 – UP 220-0137 41 FEB02

3176C R1700G LHD
310/335 HP 2100 293-9655 56 JUN06

C11 MACH UGM R1700G 434-3221 22 FEB13
324 HP @ 1800RPM
Replaces 365-8995

C11 UGM R1700G II ACERT 422-7455 14 APR13
324HP@1800RPM, 353HP@1800RPM
Replaces 270-0390,282-5105,300-7676
–
C11 MACH – R1700G LHD 422-7453 30 APR13
353HP@1800RPM
Replaces 382-6771,417-8566

3176C R1600 LHD
270 HP – 2100 9EW00001 – UP 245-7323 41 NOV03
REPLACED 177-4902,222-9279

C9 966 MWL Tier 4i 423-1460 72 SEP12
274 HP 2200
Replaced 367-5132,374-2624,386-1738
390-3132,395-1074,399-2820

C9 MACH-966/972 MWL 450-7651 SEP13
298HP@2200RPM 21
300HP@2200RPM 22
Replaced 375-6360

C9 972 MWL TIER 4
299 HP 2200 391-9930 74 Dec11
Replaced 367-5130,374-2625,349-4474
360-9616,360-9618,362-8141,386-1739,

C9 MACH-966K CVT MWL tier 4i
302HP 1850 423-1463 73 SEP12
Replaced 377-0198, 395-1076, 399-2823

C7 MACH-120K MG parts service only 437-2256 67 APR13
138 HP 2000
148 HP 2000
158 HP 2000
Replaced 330-9442,353-9918,366-1927

C7 MACH-120K MG 422-4609 67 Oct12
138 HP 2000
148 HP 2000
158 HP 2000
Replaced 366-1927, 353-9918, 330-9442

C7 MACH-120K INDIA MG 441-5016 81 APR13
158hp @ 2000 rpm parts service only
Replaces 437-2257,438-1279,365-7757,383-0730

C7 MACH-120K MG INDIA
158 HP 2000 422-4610 81 Oct12
Replaced 365-7757, 383-0730

C7.1 MACH-120M2 MG 433-3371 19 APR13
172HP@2100RPM
192HP@2100RPM
212HP@2100RPM
Replaced 361-1780,362-5042,372-5395,382-1434,386-0434,361-1782,362-5051,372-5394,382-1433

C7.1 EPG-239KW TAG 5 432-1892 26 JUL13
321HP@1800RPM
Replaces 364-5813,375-2632,380-9621,393-4668
399-8631

C7.1 MACH – 329E HEX 445-2643 23 JUL13
241HP@1800RPM
Replaces 360-7464,362-7966,373-3688,379-5802
380-6225,384-5085,387-9514,393-1597,395-3301
417-2968,433-4177

1206E-E70TTA EPG-184KW TAG 3 447-8673 28 JUL13
247HP@1800RPM
Replace 364-5816,393-4671

C7.1 1206E-E70TTA EPG – 239KW TAG 5 447-8671 26 OCT13
321HP@1800RPM
Replaces 364-5814,380-9622,393-4669

C7.1 MACH-D6K2 TTT 451-8455 8 OCT13
156HP@2200RPM
Replaces 431-0685

C7 MACH MG ENGINES, FOR PARTS SERVICE ONLY 437-2255 66 APR13
158hp @ 2000rpm
168hp @ 2000rpm
178hp @ 2000rpm
Replaces 330-9440,354-6879,366-2062

C7 MACH-120K MG INDIA 441-5016 81 June13
158HP@2000RPM
Replaces 365-7757,383-0730,437-2257
438-1279

C7 MACH-140K/160K MG parts service only 437-2258 47 APR13
188 HP 2000 48
198 HP 2000
202 HP 2000
208 HP 2000
213 HP 2000
223 HP 2000
Replaced by 313-4695,340-4697,350-7675
357-9965,366-2063,383-0729

C7 MACH-563 WFB FP 436-2755 APR13
202hp @ 2200rpm 16
225hp @ 2200rpm 18
Replaces 420-0945

C7 MACH-324D ACERT STD 436-3860 3 AUG13
174HP@1800RPM
Replaced 235-8225,260-0843,269-8275,277-6554
283-2471,291-1275,295-1172,377-5677

C7 MACH-324D LRC-STD 436-3861 11 AUG13
174HP@1800RPM
Replaces 270-7511,283-2526,291-1274,295-1171
378-0309

C7 MACH-325D HEX 436-3856 4 AUG13
197HP@1800RPM
Replaced 235-8227,260-0845,266-6521,272-1676
277-6961,283-2470,291-4778,295-1098,377-5223

C7 MACH-325D LRC STD 436-3858 12 AUG21
197HP@1800RPM
Replaced 270-7513,283-2527,295-0752,378-0305

C7 MACH-325D-LRC 436-3859 14 AUG13
216HP@1800RPM
Replaces 270-7515,283-2472,295-0582,378-0288
392-5124

C7 MACH-325D HEX 434-9480 1 AUG13
216HP@1800RPM
Replaces 236-0581,260-0846,269-0899,277-6960
283-2467,291-4784,295-0755,332-7579,377-5708

C7 MACH 325D TIER 3 436-3855 19 Aug13
250HP@1800RPM
Replaces 274-7525,292-1918,302-6782,322-2453
329-3010

C9.3 MACH-12M2 Motor Grader 422-3621 78 Sep12
202 HP 2150
220 HP 2150
Replaced 383-4274,386-2530, 395-1126

C9.3 MACH 12M3 TIER 4F MG 452-1718 25 OCT13
232hp 2000rpm
253hp 2000rpm
Replaces 384-9580,448-7888

C9 MACH- 140M2 Motor Grader 422-3619 71 Sep12
225 HP 2100
245 HP 2100
265 HP 2100
Replaced 364-1580,371-8893,374-6346, 395-1127

C9 MACH-140M Motor Grader 436-3786 148 APR13
217 HP 2000
223 HP 2000
228 HP 2000
233 HP 2000
237 HP 2000
243 HP 2000
248 HP 2000
253 HP 2000
273 HP 2000
Replaced 351-1721,352-4695,363-8089,383-2681,392-5432,422-4613

C9 MACH-160M Motor Grader 392-5433 10 Jan12
217 HP 2000
223 HP 2000
228 HP 2000
233 HP 2000
237 HP 2000
243 HP 2000
248 HP 2000
253 HP 2000
273 HP 2000
Replaced 231-0314,263-5843,271-5449
281-2878,300-9470,327-5934,348-3276
352-4697,363-8091,383-2028

C9 MACH-160M2 Motor Grader 422-3556 70 SEP12
246 HP 2100
266HP 2100
286 2100
Replaced 395-1128,374-6348,371-8892,360-7455,358-1199,3516658

C9 MACH-627 WTS 447-8668 19 SEP13
207HP@2250RPM
Replaces 387-5635

C9 MACH-627H WTS LRC 381-9598 39 JUL11
299 HP 2000
Replaced 355-9296

C9 814-816F WL ENGINE. 447-0872 9 JUL13
254 2100
Replaces 226-4732,265-4395,301-7288,359-9485
434-9492

C-10 966GII MEDIUM WHEEL LOADER
206 HP 2100 AXJ00001 – UP 301-5171 9 SEP06
REPLACED 226-2015,236-9946,256-7310

C11 RM300 RECLAIMER MIXER ACERT
350 HP 1800 1185 LB-FT 276-9837 5 JUN05
REPLACED 253-9593,261-7858

C11 966H MEDIUM WHEEL LOADER ACERT
268HP@1800RPM, 286HP@1800RPM 434-9499 4 JUL13
REPLACED 235-7510,238-4762,
276-5453,283-1438,284-1190,
305-2748,315-4987,325-9413,
353-2732,367-7565

C11 966H MLIT
268HP@1800RPM, 286HP@1800RPM 439-7183 19 JUL13
REPLACED 292-4606,302-6817,
308-6227,315-5034,325-9414,
353-2733,367-7566

C9 MACH-972K PS MWL
297HP 2200 423-1466 74 SEP12
Replaced 399-2824,395-1077,391-9930,386-1739,
362-8141,360-9618,360-9616,349-4474,374-2625,367-5130

C12 972G II MEDIUM WHEEL LOADER
283 HP 2100 AXC00001 – UP 303-6285 2 NOV06
REPLACED 218-2848, 226-2016,
236-9947,256-7311

3196 972G II MEDIUM WHEEL LOADER
304 HP 2100 303-6285 2 NOV06
REPLACED 256-7311

C13 345D DUAL RATING – TIER 3
371/409 HP 1800 RPM 447-0876 1 AUG13
REPLACED 300-1124,311-2942,319-3219,346-7518
434-9479

C13 345D DUAL RATING – LRC
371/409 HP 1800 RPM 313-5624 19 JUN07
REPLACED 299-9621

C13 972H MEDIUM WHEEL LOADER ACERT
311 HP 1800 305-2769 2 JAN07
REPLACED N/A

C13 972H MEDIUM WHEEL LOADER ACERT
311 HP 1800 358-7844 2 APR10
REPLACED 273-7596,283-1439,317-6940
325-9411,353-2734

C13 972H ACERT MLIT
311 HP 1800 RPM 358-7845 25 APR10
REPLACED 302-7121,308-6228,315-4986
325-9412,353-2735

C13 980K PS 399-2827 24 May12
381 HP 2100 RPM
REPLACED 366-4935,350-1032,362-8142
386-1740,395-1078

C13 MACH-980/982 MWL 450-5582 OCT13
420HP@1700RPM 6
430HP@1700RPM 7
Replaces 383-6130,
C13 MACH-980/982L MWL 416-4854 6,7 SEP12
406HP 1800
Replaced 349-8989

C13 MACH-980/982L MWL 416-4852 4,5 SEP12
406HP 1800
Replaced 349-8990

C13 D8N ACERT
311 HP 1800 RPM 311-2464 39 MAR07
REPLACED N/A

3176C 725 ARTICULATED DUMP TRUCK
300 HP 2200 AFX00001 – UP 316-9921 2 JUL07
REPLACED 220-0127,265-4263

300 HP 2200 Tier II 316-9921 18 JUL07
Replaced 245-0214,251-7234,265-4263

C11 725 ARTICULATED DUMP TRUCK
308 HP 1800 ACERT 325-8442 2 JAN08
REPLACED 233-1768,257-5802,
268-8084,275-0630

3196 730 ARTICULATED DUMP TRUCK
321 HP 2200 AGF00001 – UP 316-9922 1,35 JUL07
Replaced 257-5797,265-4264

C11 730 ARTICULATED DUMP TRUCK
325 HP 1800 ACERT 370-0407 3 JAN11
REPLACED 248-5022,257-5803,
268-8085,275-0631,325-8441

C11 14M MOTORGRADER
320 HP 1800 ACERT 363-8090 7 JUl10
REPLACED 231-0316,270-1685,276-7448,
295-7833,309-0794,335-6770,349-2782,
352-4698

C13 MACH-730 AT HRC 447-7381 22 SEP13
370HP@1800RPM
Replaces 381-4864,435-9864
C13 MACH-14M3 MG 385-6867 5 APR13
307HP @ 1850RPM
Replaces

C13 16M MOTORGRADER ACERT TIER 3
304 HP 2000 370-1071 7 Nov10
310 HP 2000
314 HP 2000
319 HP 2000
325 HP 2000
330 HP 2000
334 HP 2000
339 HP 2000
REPLACED 231-0310,294-7756,300-7655,309-8640,363-8092

C13 MACH-16M3 MG 398-1368 3 MAY13
359HP@2000RPM
Replaces

C13 MACH-730 AT 450-7604 26 NOV13
370HP@1800RPM
Replaced 381-4866,444-9755

C13 MACH-730 AT 450-7605 27 NOV13
375HP@1800RPM
Replaces 381-4870,444-9788

C18 24M MOTORGRADER ACERT TIER 3 422-3782 145 AUG12
REPLACED 329-9557,360-1781,366-6155
392-6571

14H/16H MOTORGRADER
222 HP 2000 3PD1 – UP 295-0119 5 JUN06
REPLACED 222-2012, 226-5039,233-8687

257 HP 2000 3PD1 – UP 330-8167 3 APR08
REPLACED 221-9703,233-8688

237 HP 2000 3PD1 – UP 310-0907 7 MAR07
REPLACED 234-1218

————————————————————————
C6.6 MACH D6K TTT 437-8736 27 APR13
156HP @ 2200RPM
Replaces 362-3923,383-2023,389-7483,419-4204

C6.6 MACH-D6K TTT 443-8411 1 AUG13
141HP@2200RPM
Replaces 265-4400,283-9816,287-6094,297-2564
304-8425,306-9220,308-4281,313-7221,328-3918
355-8520

C9.3 MACH-D6T Tier4i 422-8380 64 SEP12
223HP 2000
REPLACED:364-1920,374-7138,385-8110,
390-1820,397-4039,398-8358

C9.3 MACH-D6T TTT 451-0602 20 OCT13
156HP@2080RPM
Replaces 389-1924,443-6919,447-9790

C9.3 mach-725 at hrc 452-7694 79 NOV13
316HP@1800RPM
Replaces 388-9344,435-9866,449-9064

C9 MACH-D6T TTT 447-0871 96 JUL13
228HP@1850RPM
Replaced 292-4593,302-3835,311-1900,
377-7308,415-9384,418-7887,421-1664,434-9483

C9 MACH-D6T TTT 434-9519 97 JUL13
213HP@1850RPM
Replaces 292-4596, 302-3928,377-8388

C9 MACH-D6T TTT 434-9485 98 JUL13
228HP@1850RPM
Replaces 282-9938,292-4595,302-3920,
311-1902,377-7310

C9 MACH-D6T TTT 447-0870 104 JUL13
228HP@1850RPM
Replaces 302-3905,311-1901,377-7309,
415-9387,418-7888,434-9484

C9 MACH-D6T TTT 447-0864 105 JUL13
213HP@1850RPM
Replaces 292-4597,302-3929,377-8389
434-9486

C9 D6 TTT ENGINE. 447-0865 117 JUL13
228 1850
Replaces 310-5205,379-9457,439-7156

C9 D6 TTT ENGINE. 447-0866 118 JUL13
228 1850
Replaced 310-5207,379-9458,439-7157

C9 D6R 170 KW TTT 439-7158 119 JUL13
228hp@1850rpm
Replaces 310-5209,379-9459

C9 D6R 159 KW TTT 439-7159 120 JUL13
213hp@1850 rpm
Replaces 310-5211,379-9460

C9 MACH-D7R CHINA TTT 439-7162 138 JUL13
258HP@2100RPM
Replaces 361-2442,378-6485,388-2263

C9 MACH-D7R CHINA TTT
258HP 2100 159
Replaced

C9 MACH-D7R CHINA TTT
258HP 2100 158
Replaced

C9 MACH-D7R CHINA TTT 439-7161 139 JUL13
258HP@2100RPM
Replaces 361-2440,378-6484,388-2262

C9 MACH-DR6III ACERT 447-0867 121 JUL13
213HP@1850RPM
Replaces 310-5213,379-9461,439-7160

C9 A IRONSET AFTERTREATMENT 450-5768 N/A SEP13
0HP@0RPM
Replaced 395-2116,419-7856,448-0040

C9.3 MACH-336F HEX 451-2139 10 OCT13
314HP@1800RPM
Replaces 381-2336,448-1256

C9.3 B IRONSET AFTERTREATMENT 447-3081 N/A SEP13
0HP@0RPM
Replaced 387-4539,426-1832,441-8393

C9.3 A IRONSET T4F A5:E2 450-5764 N/A SEP13
0 hp 0rpm
Replaces 387-4535,394-7110,419-7855,448-0039

C9.3 MACH D7 Century TTT SEP12
297HP 2200 422-8381 69
Replaced:327-0807,348-3019,367-3082,372-1291,381-6321,
385-8165,397-4045
372-1291,381-6321

C9 MACH-D7 TTT 448-6940 23 OCT13
312HP@1800RPM
Replaces 399-6875

C9 MACH-160M MG 436-3829 10 APR13
217HP@2000RPm
223HP@2000RPM
228HP@2000RPm
233HP@2000RPM
237HP@2000RPM
243HP@2000RPM
248HP@2000RPM
253HP@2000RPM
273HP@2000RPM
Replaces 321-0314,263-5843,271-5449,281-2878,300-9470,327-5934,348-3276
352-4697,363-8091,383-2028,392-5433,422-4614,
—————————————————————————-

C9 MACH-627H WTSf
271HP 2150 454-2827 76 SEP12
Replaced 364-1819,382-2741,385-1864,396-8295
422-3861,452-2407
C9 MAR-175EKW 50HZ AUX 394-5055 51 Jul13
253HP@1500RPM
Replaces 242-7150,257-5172,308-5114,343-7088

C9 MAR 50HZ-GEN SET 394-5048 80 JUL13
0HP@1500RPM
Replaced 266-6496,308-5098,343-7081

C9 MAR 50HZ-GEN SET 394-5049 81 JUL13
0HP@1500RPM
Replaces 266-6497,308-5099,343-7082

C9 MAR-150EKW 50HZ AUX 394-5054 50 Jul13
217HP@1500RPM
Replaces 242-7149,257-5171,308-5113,343-7087

C13 MACH-620 WTS
378HP 2000 452-2345 23 OCT13
Replaced 372-5204,352-5151,363-8053,
366-0236,385-1854,396-8296,421-7794

C13 MACH-620 WTS LRC 452-2346 16 OCT13
410HP@1900RPM
Replaced 339-5292,381-9612,424-7895

C13 MACH-621/623/627 WTS 447-8669 29 SEP13
323HP@2100RPM
Replaces 381-9639
———————————————————————
C4.4 MACH-432/444 BHL 426-3534 15 SEP12
110HP 2200

C4.4 MACH CPPI 441-5013 74 MAY13
131HP@2200RPM
Replaced 388-3680,

C4.4 MACH 416_Tier4i 437-0051 13 MAY13
94HP@2200RPM
Replaces 368-4481,381-9425,389-1925,392-9053

C4.4 MACH BHL_Mid_Pwr_Tier4i 441-6550 15 JUL13
100 HP @ 2200 RPM 32
110 HP @ 2200 RPM
Replaces 435-1326

C4.4 MACH BHL_Low_Pwr_Tier4i 441-6549 13 JUL13
100 HP @ 2200RPM 37
94 HP @ 2200 RPM
Replaces 435-1397

C4.4 MACH CPPI 442-7979 100 AUG13
137HP@2200RPM
Replaces

C4.4 MACH CPPI 442-7977 99 AUG13
142HP@2200RPM
Replaces

C4.4 MACH 420_Tier4i 437-0396 15 MAY13
100HP@2200RPM
Replaces 368-4479,373-2443,381-9591,390-7466,392-9039

C4.4 MACH 430_Tier4i 441-7247 14 JUL13
115HP@2200RPM
Replaces 368-4477,373-2445,381-9597,388-6398,392-9070
437-0103

C4.4 MACH 450_Tier4i 441-9411 28 JUL13
142HP@2200RPM
Replaces 397-5091,437-0397

C4.4 MACH-D3/D4/D5 STTT 443-8406 15 AUG13
0HP@0RPM
Replaces 316-9767,323-5769,348-9182

C4.4 MACH TTT D3/D4/D4/D5 447-2929 OCT13
101HP@2200RPM 2
110HP@2200RPM 3
89HP@2200RPM 4
Replaced

C4.4 MACH-CPPI 98KW 445-9614 12 SEP13
131HP@2200RPM
Replaced

C4.4 MACH -CPPI 117KW 446-0257 13 SEP13
157HP@2200RPM
Replaced

C6.6-320E HEX 445-1332 24 SEP13
152HP@1800RPM
164HP@1800RPM 25
Replaced 362-4729,363-8126,373-3691,380-7276
381-4861,383-6860,386-3132,394-4391,417-4334

C6.6 MACH-938H MWL 443-8396 41 JUL13
197HP@2100RPM
Replaced 301-4619,308-3383,313-4536,327-4474
352-2393,356-7387,385-8676

C13 B IRONSET AFTERTREATMENT 444-8205 N/A JUL13
Ohp Orpm
Replaced 387-4544,419-7841,424-2437,426-1824
441-8386

C13 MACH-345D 305/277KW-LRC 447-0875 19 JUL13
371HP@1800RPM, 409HP@1800RPM
Replaces 299-9621,313-5624,380-1970,439-7179

================================================================================
C-15/C-16/C-18 Flash File Cross Reference
Truck Engines 6NZ and 7CZ and EGH (Gov.)
Updated January 15,2008 AJK

***************************************************************************
C-15 CLEAN POWER GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************
C-15 (6NZ) LOW HP ENGINE SERIAL NO. FLASH P/M RELEASE
RATING INFORMATION RANGE FILE CODE DATE
***************************************************************************

355 HP 1350 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7374 120 JAN02
REPLACED 208-5761

355 HP 1350/1450 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7375 121 JAN02
MULTITORQUE
REPLACED 208-5762

375 HP 1450 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7376 122 JAN02
REPLACED 208-5763

375 HP 1450/1550 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7377 123 JAN02
MULTITORQUE
REPLACED 208-5764

375/435 HP 1450/1550 LB-FT 1800 RPM 6NZ54000-UP 270-7116 124 APR05
MULTITORQUE
REPLACED 251-1526

410 HP 1450/1550 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7379 125 JAN02
REPLACED 208-5766

450 HP 1550/1650 LB-FT 2100 RPM 6NZ54000-UP 215-7383 129 JAN02
REPLACED 208-5770
**************************************************************************
C-15 (6NZ) HIGH HP ENGINE SERIAL NO. FLASH P/M RELEASE
RATING INFORMATION RANGE FILE CODE DATE
***************************************************************************
435 HP 1550/1650 LB-FT 1800/2100 RPM 6NZ54000-UP 270-7115 126 APR05
REPLACED 251-1525

435HP 1550/1650 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7381 127 JAN02
MULTITORQUE
REPLACED 208-5768

435/500 HP 1550/1650 LB-FT 2100 RPM 6NZ54000-UP 300-1385 128 SEP06
MT SUPPORT ALLISON OWS 4700 TRANS
REPLACED 251-1533,270-7123

455 HP 1550/1650 LB-FT 1800/2100 RPM 6NZ54000-UP 338-5273 130 OCT08
REPLACED 251-1527,270-7117

455 HP 1550/1650 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7385 131 JAN02
MULTITORQUE
REPLACED 208-5773

455 HP 1550/1750 LB-FT 2100 RPM 6NZ54000-UP 215-7386 132 JAN02
MULTITORQUE
REPLACED 208-5774

455 HP 1550/1750 LB-FT 2100 RPM 6NZ54000-UP 215-7387 133 JAN02
MULTITORQUE BRAKESAVER
REPLACED 208-5775

475 HP 1650/1750 LB-FT 1800/2100 RPM 6NZ54000-UP 338-5268 134 OCT08
REPLACED 251-1528,270-7118

475HP 1650/1750 LB-FT 1800/2100 RPM 6NZ54000-UP 338-5269 135 OCT08
BRAKESAVER
REPLACED 251-1529,270-7119

475/500 HP 1650/1850 LB-FT 2100 RPM 6NZ54000-UP 215-7390 136 JAN02
TOP 2 GEAR MULTITORQUE
REPLACED 208-5778

475/500 HP 1650/1850 LB-FT 2100 RPM 6NZ54000-UP 215-7391 137 JAN02
MULTITORQUE BRAKESAVER
REPLACED 208-5779

475/500 HP 1650/1750 LB-FT 2100 RPM 6NZ54000-UP 215-7392 138 JAN02
TOP 2 GEAR MULTITORQUE
REPLACED 208-5780

475/500HP 1650/1750 LB-FT 2100 RPM 6NZ54000-UP 215-7393 139 JAN02
TOP 2 GEAR MULTITORQUE BRAKESAVER
REPLACED 208-5781

500HP 1650 LB-FT 2100 RPM 6NZ54000-UP 338-5272 140 OCT08
500HP FLEET 1750 LB-FT 2100 RPM
435/500 HP 1550/1650 LB-FT OIL WELL SERVICE
REPLACED 208-5782,215-7394,244-1565,328-1938

500 HP 1650/1750 LB-FT 2100 RPM 6NZ54000-UP 215-7395 141 JAN02
BRAKESAVER
REPLACED 208-5783

500 HP 1850 LB-FT 2300 RPM 6NZ54000-UP 215-7396 142 JAN02
REPLACED 208-5784

500 HP 1850 LB-FT 2300 RPM 6NZ54000-UP 215-7397 143 JAN02
BRAKESAVER
REPLACED 208-5785

500 HP 1750/1850 LB-FT 2100 RPM 6NZ54000-UP 215-7398 144 JAN02
TOP 2 GEAR MULTITORQUE
REPLACED 208-5786

500 HP 1750/1850 LB-FT 2100 RPM 6NZ54000-UP 215-7399 145 JAN02
TOP 2 GEAR MULTITORQUE BRAKESAVER
REPLACED 208-5787

500 HP 1850 LB-FT 1800/2100 RPM 6NZ54000-UP 338-5270 146 OCT08
REPLACED 208-5788,215-7400,
237-0723,241-0788,244-1568

500 HP 1850 LB-FT 1800/2100 RPM 6NZ54000-UP 215-7401 147 JAN02
BRAKESAVER
REPLACED 208-5789

550 HP 1850 LB-FT 2100 RPM 6NZ54000-UP 338-5274 148 OCT08
REPLACED 244-1567,305-2778,320-2698

550 HP 1850 LB-FT 2100 RPM 6NZ54000-UP 270-7120 149 APR05
BRAKESAVER
REPLACED 251-1530

550 HP 1850 LB-FT 2100 RPM 6NZ54000-UP 270-7121 150 APR05
2300 RPM TEL FIELD UPRATE ONLY
REPLACED 251-1531

550 HP 1850 LB-FT 2100 RPM 6NZ54000-UP 270-7122 151 APR05
2300 RPM TEL FIELD UPRATE ONLY
BRAKESAVER
REPLACED 251-1532
***************************************************************************
C-15 (6NZ) LOW HP ENGINE SERIAL NO. FLASH P/M RELEASE
RATING INFORMATION RANGE FILE CODE DATE
***************************************************************************

355HP 1350PT 1800/2100RPM 6NZ1-53999 220-6640 70 MAR02

355HP 1350/1450PT 1800 RPM 6NZ1-53999 220-6641 71 MAR02
1350/1450PT 2100 RPM
MULTITORQUE

375HP 1450PT 1800/2100RPM 6NZ1-53999 220-6642 72 MAR02

375/435HP 1450/1550PT 1800PRM 6NZ1-53999 220-6644 55 MAR02
1450/1650PT 1800 RPM
MULTITORQUE

375HP MT 1450/1550PT 1800RPM 6NZ1-53999 220-6643 73 MAR02
1450/1550PT 2100RPM

410HP 1450/1550PT 1800/2100RPM 6NZ1-53999 220-6645 74 MAR02
FIELD UPRATE ONLY

450HP 1550/1650PT 2100RPM 6NZ1-53999 220-6650 78 MAR02
FIELD UPRATE ONLY
***************************************************************************
C-15 (6NZ) HIGH HP ENGINE SERIAL NO. FLASH P/M RELEASE
RATING INFORMATION RANGE FILE CODE DATE
***************************************************************************
435HP 1550/1650PT 1800/2100RPM 6NZ1-53999 270-7073 75 APR05
Replaced 220-6646,241-0793,251-2217

435HP 1550/1650PT 1800/2100RPM 6NZ1-53999 220-6647 76 MAR02
BRAKESAVER

435/500HP 1550/1650 2100RPM 6NZ1-53999 270-7074 77 APR05
MULTITORQUE
Replaced 220-6649,241-0794,
251-2218

455HP 1550PT 2100RPM OR 6NZ1-53999 220-6651 79 MAR02
1650PT 1800/2100RPM

455HP 1550PT 2100RPM OR 6NZ1-53999 220-6652 80 MAR02
1650PT 1800/2100RPM BRAKESAVER

455HP 1550/1750PT 2100 RPM 6NZ1-53999 220-6653 81 MAR02
MULTITORQUE

455HP 1550/1750PT 2100 RPM 6NZ1-53999 220-6654 82 MAR02
BRAKESAVER MULTITORQUE

475HP 1650/1750PT 1800/2100RPM 6NZ1-53999 270-7067 6 APR05
REPLACED 220-6655,237-0703,
241-0777,251-2211

475HP 1650/1750PT 1800/2100RPM 6NZ1-53999 270-7068 83 APR05
BRAKESAVER
REPLACED 220-6657, 2370704,
241-0778,251-2212

475/500HP 1650/1850PT 2100 RPM 6NZ1-53999 220-6658 84 MAR02
TOP 2 GEAR MULTITORQUE

475/500HP 1650/1850PT 2100 RPM 6NZ1-53999 220-6659 85 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

475/500HP 1650/1750PT 2100 RPM 6NZ1-53999 220-6660 86 MAR02
TOP 2 GEAR MULTITORQUE

475/500HP 1650/1750PT 2100 RPM 6NZ1-53999 220-6661 87 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

500HP 1650PT 2100RPM, 6NZ1-53999 220-6662 88 MAR02
500HP FLEET 1750PT 2100RPM or
435/500HP 1550/1650 OIL WELL SERVICE

500HP 1650PT 2100RPM BRAKESAVER 6NZ1-53999 220-6664 89 MAR02
OR 500HP FLEET 1750PT 2100RPM BRAKESAVER

500HP 1850PT 1800/2100RPM 6NZ1-53999 220-6665 90 MAR02
2300RPM TEL FIELD UPRATE ONLY

500HP 1750/1850PT 2100 RPM 6NZ1-53999 220-6667 92 MAR02
TOP 2 GEAR MULTITORQUE

500HP 1750/1850PT 2100 RPM 6NZ1-53999 220-6668 93 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

500HP 1850PT 1800/2100RPM 6NZ1-53999 220-8235 94 MAR02

500HP 1850PT 1800/2100RPM 6NZ1-53999 220-8236 95 MAR02
BRAKESAVER

500HP 1850PT 1800/2100RPM 6NZ1-53999 220-6666 91 MAR02
BRAKESAVER 2300RPM TEL FIELD UPRATE ONLY

550HP 1850PT 2100RPM 6NZ1-53999 270-7069 7 APR05
REPLACED 220-8237, 237-0705,241-0779,251-2213

550HP 1850PT 2100RPM BRAKESAVER 6NZ1-53999 270-7070 96 APR05
REPLACED 220-8238, 237-0706,
241-0780,251-2214

550HP 1850PT 2100RPM 6NZ1-53999 270-7071 97 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 220-8239, 237-0707,241-0781,251-2215

550HP 1850PT 2100RPM BRAKESAVER 6NZ1-53999 270-7072 98 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 220-8240, 237-0708,241-0782,251-2216

***************************************************************************
C-16 CLEAN POWER GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************

575HP 1850PT 2100RPM 7CZ02800-UP 215-7406 152 JAN02
REPLACED 208-5794

575HP 1850PT 2100RPM 7CZ02800-UP 215-7407 153 JAN02
BRAKESAVER REPLACED 208-5795

575HP 1850PT 2100RPM 7CZ02800-UP 215-7408 154 JAN02
REPLACED 208-5796 TEL 2300RPM

575HP 1850PT 2100RPM 7CZ02800-UP 215-7409 155 JAN02
BRAKESAVER REPLACED 208-5797 TEL 2300RPM

575/600HP 1850/2050PT 2100RPM 7CZ02800-UP 215-7410 156 JAN02
MULTITORQUE REPLACED 208-5798

575/600HP 1850/2050PT 2100RPM 7CZ02800-UP 215-7411 157 JAN02
BRAKESAVER MULTITORQUE
REPLACED 208-5799

600HP 2050PT 2100RPM 7CZ02800-UP 338-5275 158 OCT08
REPLACED 208-5800,215-7412,237-0728,
241-0800,251-1534,270-7124

600HP 2050PT 2100RPM 7CZ02800-UP 270-7125 159 APR05
BRAKESAVER
REPLACED 208-5801,215-7413,237-0729,241-0801,251-1535

600HP 2050PT 2100RPM 7CZ02800-UP 270-7126 160 APR05
TEL 2300RPM
REPLACED 208-5802,215-7414,237-0730,
241-0802,251-1536

600HP 2050PT 2100RPM 7CZ02800-UP 270-7127 161 APR05
BRAKESAVER TEL 2300RPM
REPLACED 208-5803,215-7415,237-0731,
241-0803,251-1537

650HP 2050PT 2100RPM 7CZ02800-UP 267-5143 162 JAN05
Aircraft Rescue Firetruck only – Oshkosh
REPLACED 208-0523,251-1626

680HP 1951PT 2100RPM 7CZ02800-UP 267-5143 162 JAN05
Aircraft Rescue Firetruck only – Oshkosh
REPLACED 232-2644,243-0022,251-1626
***************************************************************************
C-16 (7CZ) ENGINE SERIAL NO. FLASH P/M RELEASE
RATING INFORMATION RANGE FILE CODE DATE
***************************************************************************
575HP 1850PT 2100RPM 7CZ1-02799 220-8241 56 MAR02
REPLACES 198-3265

575HP 1850PT 2100RPM BRAKESAVER 7CZ1-02799 220-8242 99 MAR02
REPLACES 198-3266

575HP 1850PT 2100RPM 7CZ1-02799 220-8243 101 MAR02
2300 RPM TEL FIELD UPRATE ONLY
REPLACES 198-3267

575HP 1850PT 2100RPM BRAKESAVER 7CZ1-02799 220-8244 100 MAR02
2300 RPM TEL FIELD UPRATE ONLY
REPLACES 198-3268

575/600HP 1850/2050PT 2100RPM 7CZ1-02799 220-8245 102 MAR02
REPLACES 198-3269
MULTITORQUE

575/600HP MT 1850/2050PT 2100RPM 7CZ1-02799 220-8246 103 MAR02
BRAKESAVER
REPLACES 198-3270

600HP 2050PT 2100RPM 7CZ1-02799 270-7075 8 APR05
REPLACES 198-3271,220-8247,237-0709,
241-0796,251-2219

600HP 2050PT 2100RPM BRAKESAVER 7CZ1-02799 270-7076 104 APR05
REPLACES 198-3272,220-8248,237-0710,
241-0797,251-2220

600HP 2050PT 2100RPM 7CZ1-02799 270-7077 105 APR05
2300 RPM TEL FIELD UPRATE ONLY
REPLACES 198-3273,220-8249,237-0711,
241-0798,251-2221

600HP 2050PT 2100RPM BRAKESAVER 7CZ1-02799 270-7078 106 APR05
2300 RPM TEL FIELD UPRATE ONLY
REPLACES 198-3274,220-8250,237-0712,
241-0799,251-2222

650HP 2050PT 2100PRM 220-4294 162 FEB02
AIRCRAFT/FIRE FIGHTING APPLICATION

650HP 1951PT 2100/2300 TEL 7CZ1-02799 251-1629 163 APR04
REPLACES 232-2643, 235-6399,241-0816
***************************************************************************
C-18
***************************************************************************

C-18 700HP @2300RPM 1900PT@2100RPM MEP1-UP 241-0817 1 JUN03
Military only
REPLACED 217-3928,224-9318,227-5521,232-2647,
238-2680,239-4147

C-18 700HP @2300RPM 1900PT@2100RPM MEP1-UP 232-2648 1 NOV02
Military only
REPLACED 226-4417,227-5522

***************************************************************************
C-16 EGH
***************************************************************************
525 HP 1773 LB-FT 2100/2300 TEL 6NZ54000-UP 268-0221 164 APR05
(Government/Military) EGH
REPLACED 251-1628
***************************************************************************
================================================================================
2yg & 7lg Personality Module Cross Reference
3176 2YG & 7LG PERSONALITY MODULE CROSS REFERENCE
UPDATED 6/22/95

DESCRIPTION S/N PART RE-MAN INTERLOCK RELEASE
RANGE NUMBER PART NUMBER CODE DATE
———————————————————————
250 HP 2YG1 – UP 114-6689 OR6891 3 JUL 93
STANDARD

250 HP 2YG1 – UP 114-6707 OR6895 5 JUL 93
URBAN BUS

275 HP 2YG1 – UP 114-6691 OR6892 4 JUL 93
STANDARD

300 HP 2YG1 – UP 114-6694 OR6893 1 JUL 93

STANDARD

325 HP 2YG1 – UP 114-6698 OR6894 2 JUL 93
STANDARD

325 TO 350 2YG1 – UP 113-8969 NOT AVAIL 29 JUL 93

UPGRADE KIT

DESCRIPTION S/N PART RE-MAN INTERLOCK RELEASE
RANGE NUMBER PART NUMBER CODE DATE
———————————————————————
250 HP 7LG1-07499 112-2074 OR6851 8 JUL 93
STANDARD

250 HP 7LG1-07499 112-2078 OR6855 13 JUL 93
URBAN BUS

275 HP 7LG1-07499 112-2075 OR6852 9 JUL 93
STANDARD

275 HP 7LG1-07499 112-2082 NOT AVAIL 9 JUL 93
J1922

275 HP 7LG1-07499 112-2079 NOT AVAIL 9 JUL 93
BULK HAULER

300 HP 7LG1-07499 112-2076 OR6853 10 JUL 93
STANDARD

300 HP 7LG1-07499 112-2085 NOT AVAIL 10 JUL 93
J1922

300 HP 7LG1-07499 112-2080 NOT AVAIL 10 JUL 93
BULK HAULER

325 HP 7LG1-07499 112-2077 OR6854 11 JUL 93
STANDARD

325 HP 7LG1-07499 112-2087 OR6856 11 JUL 93
J1922

325 HP 7LG1-07499 112-2081 NOT AVAIL 11 JUL 93
BULK HAULER

325 TO 350 7LG1-07499 115-3011 NOT AVAIL 30 JUL 93

UPGRADE KIT

DESCRIPTION S/N PART RE-MAN INTERLOCK RELEASE
RANGE NUMBER PART NUMBER CODE DATE
———————————————————————
275 HP 7LG07500-15999 112-2072 OR6857 19 JUL 93
STANDARD

275 HP 7LG07500-15999 112-2068 OR6861 19 JUL 93
J1922

275 HP 7LG07500-15999 112-2063 NOT AVAIL 19 JUL 93
BULK HAULER

300 HP 7LG07500-15999 112-2071 OR6858 20 JUL 93
STANDARD

300 HP 7LG07500-15999 112-2067 OR6862 20 JUL 93
J1922

300 HP 7LG07500-15999 112-2062 NOT AVAIL 20 JUL 93
BULK HAULER

325 HP 7LG07500-15999 112-2070 OR6859 16 JUL 93
STANDARD

325 HP 7LG07500-15999 112-2065 OR6863 16 JUL 93
J1922

325 HP 7LG07500-15999 112-2061 NOT AVAIL 16 JUL 93
BULK HAULER

350 HP 7LG07500-15999 112-2069 OR6860 16 JUL 93
STANDARD

350 HP 7LG07500-15999 112-2064 OR6864 16 JUL 93
J1922

350 HP 7LG07500-15999 112-2060 NOT AVAIL 16 JUL 93
BULK HAULER

DESCRIPTION S/N PART RE-MAN INTERLOCK RELEASE
RANGE NUMBER PART NUMBER CODE DATE
———————————————————————
275 HP 7LG16000-UP 111-4156 OR6841 28 JUL 93
STANDARD

275 HP 7LG16000-UP 111-4150 OR6846 28 JUL 93
J1922

275 HP 7LG16000-UP 111-4188 NOT AVAIL 28 JUL 93
BULK HAULER

300 HP 7LG16000-UP 111-4154 OR6842 27 JUL 93
STANDARD

300 HP 7LG16000-UP 111-4148 OR6847 27 JUL 93
J1922

300 HP 7LG16000-UP 111-4186 NOT AVAIL 27 JUL 93
BULK HAULER

325 HP 7LG16000-UP 111-4158 OR6843 26 JUL 93
STANDARD

325 HP 7LG16000-UP 111-4146 OR6848 26 JUL 93
J1922

325 HP 7LG16000-UP 111-4184 NOT AVAIL 26 JUL 93
BULK HAULER

350 HP 7LG16000-UP 111-4152 OR6844 25 JUL 93
STANDARD

350 HP 7LG16000-UP 111-4144 OR6849 25 JUL 93
J1922

350 HP 7LG16000-UP 111-4182 NOT AVAIL 25 JUL 93
BULK HAULER

360 HP 7LG16000-UP 111-4160 OR6845 24 JUL 93
STANDARD

360 HP 7LG16000-UP 111-4173 OR6850 24 JUL 93
J1922

360 HP 7LG16000-UP 111-4162 NOT AVAIL 24 JUL 93
BULK HAULER

DESCRIPTION S/N PART RE-MAN INTERLOCK RELEASE
RANGE NUMBER PART NUMBER CODE DATE
———————————————————————-
325 HP 7LG CHALLENGER 3E5491 OR6573 18 OCT 91
———————————————————————-

================================================================================
3176B FLASH FILE CROSS REFERENCE
3176B FLASH FILE CROSS REFERENCE
UPDATED 5/21/98

WARNING!!!

The original personality modules in some 3176B and 3406E engines between
9CK1 – 5000 and 5EK1 – 5000 can NOT be flashed with NOV95 or newer
software. The Flash program may terminate at 20 to 25% complete when
attempting to flash these personality modules with NOV95 or newer software.

Many of the personality modules in the affected serial number range can be
flashed with NOV95 or newer software because the original personality
module was replaced with a compatible one during an earlier software update
or ECM replacement. However, before attempting to flash the personality
modules on engines in the affected range, make sure that there is a
106-9184 personality module available. If the flash attempt fails, try
again. If both attempts terminate at 20 to 25% complete, replace the
personality module with the 106-9184 module and repeat the flash
programming.

Since the flash process erases the file from the personality module before
programming it, a failure while flashing the personality module in the
affected range will render the engine inoperable. Once this occurs, there
are two options; 1) replace the personality module with a 106-9184 module
and re-flash or 2) flash the original personality module with pre-NOV95
software.

Option 1 is the preferred method since it makes the engine compatible with
all future software releases. However, if a new personality module is not
available option 2 can be used. The pre-NOV95 files have been put back on
the Caterpillar mailbox for downloading. They are listed below along with
the current files.

The latest flash files call for default injector codes to be entered. The
default injector code for 3176B, C-10, and C-12 engines is 2300.

TRUCK (Factory Ratings)

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
—————————————————————————
275 HP 1800 9CK1 – UP 146-9259 146-9261 4 MAR 97
(STANDARD)
146-9368 4 MAR 97
(208.5ŒF FAN-ON TEMP)
125-7999 125-8001 4 JUN 95
(STANDARD)

300 HP 1800 9CK1 – UP 146-9262 146-9264 5 MAR 97
125-8002 125-8004 5 JUN 95

325 HP 1800 9CK1-18308 159-2840 2 FEB 98
129-2589 129-2591 2 JUN 95

325 HP 1800 9CK18309-UP 159-2838 26 FEB 98
(STANDARD)
141-9470 26 AUG 96
(208.5ŒF FAN-ON TEMP)
125-8018 125-8021 26 JUN 95
(STANDARD)

325/350 HP 1800 9CK18309-UP 159-2839 27 FEB 98
MULTI TORQUE 125-8022 125-8024 27 JUN 95

335/365 HP 1800 9CK1 – UP 159-2837 13 FEB 98
MULTI TORQUE 125-8012 125-8014 13 JUN 95

TRUCK (Factory Ratings)(cont’d)

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
————————————————————————
342 HP 1800 9CK1 – UP 146-9276 146-9278 12 MAR 97
(OIL FIELD ONLY) 125-8015 125-8017 12 JUN 95

350 HP 1800 9CK1 – UP 159-2835 1 FEB 98
125-8005 125-8007 1 JUN 95

365 HP 1800 9CK1 – UP 159-2836 9 FEB 98
125-8008 125-8010 9 JUN 95

* MAR 97 effective with factory built 3176B engine S/N 9CK32702.

TRUCK (Field Uprate Ratings)

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
————————————————————————
300 HP (2T7318)1800 9CK1 – UP 159-2841 34 FEB 98
132-9662 132-9664 34 FEB 96
(FIELD UPRATE ONLY! W/ 275 HP IRON)

350 HP (2T7314)1800 9CK1-18308 159-2842 35 FEB 98
132-9666 132-9668 35 FEB 96
(FIELD UPRATE ONLY! W/ 325 HP IRON)

365 HP (2T7316)1800 9CK18309-UP 159-2843 36 FEB 98
132-9671 132-9673 36 FEB 96
(FIELD UPRATE ONLY! W/ 325 HP IRON)

365 HP (2T7316)1800 9CK1 – UP 159-2843 36 FEB 98
132-9671 132-9673 36 FEB 96
(FIELD UPRATE ONLY! W/ 350 HP IRON)

CHALLENGER AGRICULTURAL TRACTOR

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
————————————————————————
CH75C 335 HP 2100 43Z772 – UP 154-8639 154-8640 8 OCT 97
CH85C 335/365 2100 43Z772 – UP 154-8641 154-8642 3 OCT 97

3176B INDUSTRIAL

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
————————————————————————–
310 HP 2100 3NL1 – UP 137-9548 137-9550 19 AUG 96
335 HP 2100 3NL1 – UP 137-9551 137-9553 18 AUG 96
342 HP 1800 3NL1 – UP 146-9276 146-9277 12 MAR 97
365 HP 2100 3NL1 – UP 137-9554 137-9556 7 AUG 96
390 HP 2100 3NL1 – UP 137-9557 137-9559 16 AUG 96
400 HP 2100 3NL1 – UP 137-9560 137-9562 20 AUG 96
425 HP 2100 3NL1 – UP 137-9563 137-9565 17 AUG 96

UNDERGROUND MINING

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
———————————————————————–
310 HP 2100 3NL1 – UP 141-5584 141-6067 41 AUG 96

MARINE

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
———————————————————————–
450 HP 2300 9WK1 – UP 143-6737 143-6739 10 NOV 96

525 HP 2300 9WK1 – UP 143-6740 143-6742 11 NOV 96

600 HP 2300 9WK1 – UP 143-6743 143-6745 6 NOV 96

600 HP 2300 9WK1 – UP 154-6829** 154-8350 47 OCT 97

* NOV 96 MARINE SOFTWARE IS FACTORY INSTALLED EFFECTIVE WITH 9WK00782
** USE ONLY WITH INJECTOR PART NO. 142-9975

EURO II CERTIFIED TRUCK ENGINES (Not for use in United States):

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
———————————————————————–
325 HP 1900 9CK1 – UP 119-5947 119-5949 22 FEB 97

350 HP 1900 9CK1 – UP 119-5943 119-5945 23 FEB 97

365 HP 1900 9CK1 – UP 119-5951 119-5953 24 FEB 97

GENERATOR SET

DESCRIPTION GOV S/N FLASH SERVICE ITRLCK RELEASE
SPEED RANGE CODE REPLACEMENT CODE DATE
———————————————————————–
265 HP 1200 3NL1 – UP 116-2842 116-2854 14 MAR 94

================================================================================
3406B/C PEEC, PEEC II, PEEC 2.5, AND ELECTRONIC_PERSONALITY MODULE CROSS REF

3406B/C PEEC, PEEC II, PEEC 2.5, AND ELECTRONIC
PERSONALITY MODULE CROSS-REFERENCE
October 20,1997
ECM Eng S/N Range HP Rating IC PM
II 8TC1-1412 285 EPA 2 1019291-00
II 8TC1-1412 285 EPA 2 0R6666-00
II 8TC1413-10980 285 EPA 101 1019295-00
II 8TC1413-10980 285 EPA 101 0R6648-00
II 8TC1413-Up 285 CARB 102 1019282-00
II 8TC1413-Up 285 CARB 102 0R6656-00
II 8TC1-1412 310 EPA 2 1019292-00
II 8TC1-1412 310 EPA 2 0R6667-00
II 8TC1413-10980 310 EPA 101 1019296-00
II 8TC1413-10980 310 EPA 101 0R6649-00
II 8TC1413-UP 310 CARB 102 1019283-00
II 8TC1413-UP 310 CARB 102 0R6657-00
II 8TC1413-UP 310 MT Top1 CARB 113 1019307-00
II 8TC1413-UP 310 MT Top1 CARB 113 0R6664-00
II 8TC1413-UP 310 MT Top4 CARB 113 1022492-00
II 8TC1413-UP 310 MT Top4 CARB 113 0R6681-00
II 8TC1413-10980 310 PDCC EPA 108 1019303-00
II 8TC1413-10980 310 PDCC EPA 108 0R6655-00
II 8TC1413-UP 310 PDCC CARB 109 1019290-00
II 8TC1413-UP 310 PDCC CARB 109 0R6665-00
II 2EK1 – UP 310 Std 10 1019248-00
II 2EK1 – UP 310 Std 10 0R6632-00
II 2EK1 – UP 310 MT Top1 11 1019249-00
II 2EK1 – UP 310 MT Top1 11 0R6633-00
II 2EK1 – UP 310 MT Top4 11 1022490-00
II 2EK1 – UP 310 MT Top4 11 0R6679-00
II 2EK1 – UP 310 PDCC 12 1019250-00
II 2EK1 – UP 310 PDCC 12 0R6634-00
II.V 8TC9090 – 10980 310 EPA 101 1019296-00
II.V 8TC9090 – 10980 310 EPA 101 0R6649-00
II.V 8TC10981 – Up 310 CARB 102 1019283-00
II.V 8TC10981 – Up 310 CARB 102 0R6657-00
II.V 8TC10981 – Up 310 MT Top1 CARB 113 1022492-00
II.V 8TC10981 – Up 310 MT Top1 CARB 113 0R6681-00
II.V 2EK1 – UP 310 NAR 10 1019248-00
II.V 2EK1 – UP 310 NAR 10 0R6632-00
II.V 2EK1 – Up 310 MT Top1 11 1019249-00
II.V 2EK1 – Up 310 MT Top1 11 0R6633-00
III 4CK1 – Up 310@1800 10 1457832-00
III 4CK1 – Up 310 MT Top1 11 1457834-00
III 4CK1 – Up 310 MT Top4 11 1457849-00
III 4CK1 – Up 310 PDCC 12 1457851-00
II 8TC1 – 1412 330/350LT EPA 1 1019293-00
II 8TC1 – 1412 330/350LT EPA 1 0R6646-00
II 8TC1413 – 10980 330/350LT EPA 103 1019297-00
II 8TC1413 – 10980 330/350LT EPA 103 0R6650-00
II 8TC8792 – UP 330/350LT NAR LCV 114 1019284-00

II 8TC8792 – UP 330/350LT NAR LCV 114 0R6658-00
II 2EK1 – Up 330@1800 23 1019251-00
II 2EK1 – Up 330@1800 23 0R6635-00
II.V 2EK1 – Up 330@1800 23 1019251-00
II.V 2EK1 – Up 330@1800 23 0R6635-00
III 4CK1 – Up 330@1800 23 1457853-00
II 8TC1 – 1412 350 EPA 1 1019294-00
II 8TC1 – 1412 350 EPA 1 0R6647-00
II 8TC1413 – 10980 350 EPA 103 1019298-00
II 8TC1413 – 10980 350 EPA 103 0R6651-00
II 8TC8792 – UP 350 NAR LCV 114 1019285-00
II 8TC8792 – UP 350 NAR LCV 114 0R6659-00
II 8TC1413 – Up 350 EPA MT Top2 121 1022493-00
II 8TC1413 – Up 350 EPA MT Top2 121 0R6682-00
II 8TC1413 – Up 350 EPA MT Top4 121 1022494-00
II 8TC1413 – Up 350 EPA MT Top4 121 0R6683-00
II 2EK1 – Up 350@2000 13 1019252-00
II 2EK1 – Up 350@2000 13 0R6636-00
II 2EK1 – Up 350@1800 14 1019253-00
II 2EK1 – Up 350@1800 14 0R6637-00
II 2EK1 – Up 350@1800 LT 15 1019255-00
II 2EK1 – Up 350@1800 LT 15 0R6639-00
II 2EK1 – Up 350@1800 MT Top2 16 1019254-00
II 2EK1 – Up 350@1800 MT Top2 16 0R6638-00
II 2EK1 – Up 350@1800 MT Top4 16 1022491-00
II 2EK1 – Up 350@1800 MT Top4 16 0R6680-00
II.V 8TC9090 – 10980 350 EPA 114 1019285-00
II.V 8TC9090 – 10980 350 EPA 114 0R6659-00
II.V 8TC10981 – Up 350 NAR 121 1022493-00
II.V 8TC10981 – Up 350 NAR 121 0R6682-00
II.V 2EK1 – Up 350 Std Hi RPM 13 1019252-00
II.V 2EK1 – Up 350 Std Hi RPM 13 0R6636-00
II.V 2EK1 – Up 350 Std Lo RPM 14 1019253-00
II.V 2EK1 – Up 350 Std Lo RPM 14 0R6637-00
II.V 2EK1 – Up 350 Lo Torque 15 1019255-00
II.V 2EK1 – Up 350 Lo Torque 15 0R6639-00
II.V 2EK1 – Up 350 MT Top2 16 1019254-00
II.V 2EK1 – Up 350 MT Top2 16 0R6638-00
III 4CK1 – Up 350@2000 w/o Brksv 13 1457873-00
III 4CK1 – Up 350@2000 w/Brksv 25 3E9115-00
III 4CK1 – 3413 350@1800 14 1457867-00
III 4CK3414 – Up 350@1800 14 1457856-00
III 4CK1 – 10214 350@1800 LT 15 1457877-00
III 4CK10215 – Up 350@1800 LT 15 1457875-00
III 4CK1 – 3413 350 MT Top2 16 1457879-00
III 4CK 3414 – Up 350 MT Top2 16 1457881-00
III 4CK1 – 3413 350 MT Top4 16 1457884-00
III 4CK 3414 – Up 350 MT Top4 16 1457890-00
III 4CK1 – Up 365 Std w/o Brksv 24 1457899-00
III 4CK1 – Up 365 Std w/Brksv 27 3E9120-00
III 4CK1 – Up 365 MT Top2 w/o Brksv 26 1457911-00
III 4CK1 – Up 365 MT Top2 w/Brksv 28 3E9130-00
III 4CK1 – Up 365 MT Top4 w/o Brksv 26 1457916-00
III 4CK1 – Up 365 MT Top4 w/Brksv 28 1457923-00
III 4CK1 – Up 365 HT MT Top4 w/o 34 1457935-00
Brksv
III 4CK1 – Up 365 HT MT Top4 35 1457941-00
w/Brksv
II 8TC1413 – Up 375/400 LT CARB 105 1019286-00
II 8TC1413 – Up 375/400 LT CARB 105 0R6660-00
II 8TC1413 – 10980 375/400 LT EPA 104 1019299-00
II 8TC1413 – 10980 375/400 LT EPA 104 0R6652-00
II 8TC1413 – 10980 400 EPA 104 1019300-00
II 8TC1413 – 10980 400 EPA 104 0R6653-00
II 8TC1413 – Up 400 CARB 105 1019287-00
II 8TC1413 – Up 400 CARB 105 0R6661-00
II 2EK1 – Up 400 Std 17 1019256-00
II 2EK1 – Up 400 Std 17 0R6640-00
II.V 8TC9090 – 10980 400 EPA 104 1019300-00
II.V 8TC9090 – 10980 400 EPA 104 0R6653-00
II.V 8TC10981 – Up 400 CARB 105 1019287-00
II.V 8TC10981 – Up 400 CARB 105 0R6661-00
II.V 2EK1 – Up 400 Std 17 1019256-00
II.V 2EK1 – Up 400 Std 17 0R6640-00
III 4CK1 – Up 400 Std w/o Brksv 17 1457944-00
III 4CK1 – Up 400 Std w/Brksv 26 1457950-00
II 8TC1413 – 10980 425 EPA 106 1019301-00
II 8TC1413 – 10980 425 EPA 106 0R6654-00
II 8TC1413 – Up 425 CARB 107 1019288-00
II 8TC1413 – Up 425 CARB 107 0R6662-00
II 2EK1 – Up 425@2000 18 1019257-00
II 2EK1 – Up 425@2000 18 0R6641-00
II 2EK1 – Up 425@1800 21 1019258-00
II 2EK1 – Up 425@1800 21 0R6642-00
II 2EK1 – Up 425@2000 HT 19 1019259-00
II 2EK1 – Up 425@2000 HT 19 0R6643-00
II 2EK1 – Up 425@1800 HT 22 1019260-00
II 2EK1 – Up 425@1800 HT 22 0R6644-00
II.V 8TC1413 – 10980 425 EPA 106 1019301-00
II.V 8TC1413 – 10980 425 EPA 106 0R6654-00
II.V 8TC1413 – Up 425 CARB 107 1019288-00
II.V 8TC1413 – Up 425 CARB 107 0R6662-00
II.V 2EK1 – Up 425@2000 18 1019257-00
II.V 2EK1 – Up 425@2000 18 0R6641-00
II.V 2EK1 – Up 425@1800 21 1019258-00
II.V 2EK1 – Up 425@1800 21 0R6642-00
II.V 2EK1 – Up 425@2000 HT 19 1019259-00
II.V 2EK1 – Up 425@2000 HT 19 0R6643-00
II.V 2EK1 – Up 425@1800 HT 22 1019260-00
II.V 2EK1 – Up 425@1800 HT 22 0R6644-00
III 4CK1 – Up 425@2000 w/o Brksv 18 1457952-00
III 4CK1 – Up 425@2000 w/Brksv 29 1457954-00
III 4CK1 – 10214 425@1800 w/o Brksv 21 1457975-00
III 4CK10215 – Up 425@1800 w/o Brksv 21 1457971-00
III 4CK1 – 9352 425@2000 HT w/o Brksv 19 1457958-00
III 4CK9353 – Up 425@2000 HT w/o Brksv 19 1457956-00
III 4CK1 – 9352 425@2000 HT w/Brksv 30 1457962-00
III 4CK9353 – Up 425@2000 HT w/Brksv 30 1457960-00
III 4CK1 – 13151 425@1800 HT w/o Brksv 22 1457967-00
III 4CK13151 – Up 425@1800 HT w/o Brksv 22 1457965-00
III 4CK1 – Up 425@1800 HT w/Brksv 31 1457969-00
II 5YG1 – Up 460@1900 110 1019289-00
II 5YG1 – Up 460@1900 110 0R6663-00
II 2EK1 – Up 460@1900 110 1019261-00
II 2EK1 – Up 460@1900 110 0R6645-00
II.V 2EK1 – Up 460@1900 110 1019261-00
II.V 2EK1 – Up 460@1900 110 0R6645-00
III 4CK1 – Up 460@1900 w/o Brksv 20 1458002-00
III 4CK1 – Up 460@1900 w/Brksv 32 1458004-00
**************** METAL TURB0 WHEEL ONLY **************************
III 4CK1 – Up 460@1900 w/o Brksv 20 1457978-00
III 4CK1 – Up 460@1900 w/Brksv 32 1457980-00
================================================================================
3406E FLASH File Cross Reference – Updated 09/28/95
3406E FLASH FILE CROSS REFERENCE
Updated September 28,1995

Serial No. Flash Service Release
Description Range Part No. Replacement IC Date

310 HP 1150 PT 5EK00001 & 129-0227 129-0232 33 AUG95
UP

310 HP 1250 PT 5EK00001 & 129-0236 129-0238 34 AUG95
UP

310 HP 1150/1350PT 5EK00001 & 129-0239 129-0241 35 AUG95
MULTI-TORQUE UP

330HP 1350 PT 5EK00001 129-0242 129-0244 36 AUG95
UP

355 HP 1350 PT 5EK00001 – 120-4032 120-4034 6 JAN95
5EK01820

355 HP 1350 PT 5EK01821 & 129-0160 129-0162 22 AUG95
UP

355 HP 1350/1450PT 5EK00001 – 120-4029 120-4031 7 JAN95
MULTI-TORQUE 5EK01820

355 HP 1350/1450PT 5EK01821 & 129-0163 129-0171 23 AUG95
MULTI-TORQUE UP

375 HP 1450 PT 5EK00001 – 120-4023 120-4025 4 JAN95
5EK01820

375 HP 1450 PT 5EK01821 & 129-0172 129-0174 20 AUG95
UP

375 HP 1450/1550PT 5EK00001 – 120-4047 120-4049 10 JAN95
MULTI-TORQUE 5EK01820

375 HP 1450/1550PT 5EK01821 – 129-0175 129-0177 21 AUG95
MULTI-TORQUE UP

410 HP 1450 PT 5EK00001 & 129-0203 129-0205 19 AUG95
UP

410 HP 1450 PT 5EK00001 & 129-0206 129-0210 29 AUG95
BRAKESAVER UP

410 HP 1550 PT 5EK00001 & 129-0211 129-0213 30 AUG95
UP

410 HP 1550 PT 5EK00001 & 129-0214 129-0216 31 AUG95
BRAKESAVER UP

435 HP 1450 PT 5EK00549 – 120-4038 120-4040 11 JAN95
5EK01184

435 HP 1550 PT 5EK00549 – 120-4035 120-4037 12 JAN95
5EK01184

435 HP 1550 PT 5EK01185 – 126-4361 126-4363 17 JUN95
5EK53003

435 HP 1550 PT 5EK53004 & 129-0251 129-0253 43 AUG95
UP

435 HP 1550 PT 5EK01185 – 126-4364 126-4366 18 JUN95
BRAKESAVER 5EK53003

435 HP 1550 PT 5EK53004 & 129-0254 129-0256 44 AUG95
BRAKESAVER UP

435 HP 1650 PT 5EK00001 – 120-4020 120-4022 3 JAN95
5EK00548

435 HP 1650 PT 5EK00549 – 120-4044 120-4046 13 JAN95
5EK01184

435 HP 1650 PT 5EK01185 – 126-4368 126-4373 15 JUN95
5EK53003

435 HP 1650 PT 5EK53004 & 129-0257 129-0259 45 AUG95
UP

435 HP 1650 PT 5EK00001 – 120-4026 120-4028 5 JAN95
BRAKESAVER 5EK00548

435 HP 1650 PT 5EK00549 – 120-4041 120-4043 14 JAN95
BRAKESAVER 5EK01184

435 HP 1650 PT 5EK01185 – 126-4375 126-4377 16 JUN95
BRAKESAVER 5EK53003

435 HP 1650 PT 5EK53004 & 129-0261 129-0263 46 AUG95
BRAKDSAVER UP

********* 435HP 1650 PT HIGH RPM PERFORANCE — FLASH ONLY ***********

435 HP 1650 PT 5EK01185 – 125-3230 15 JUN95
5EK53003

435 HP 1650 PT 5EK01185 – 125-3237 16 JUN95
BRAKESAVER 5EK53003

435 HP 1650 PT 5EK53004 & 129-2595 45 AUG95
UP

435 HP 1650 PT 5EK53004 & 129-2598 46 AUG95
BRAKESAVER UP

********************************************************************

455 HP 1650 PT 5EK00001 – 126-4444 126-4446 27 JUN95
5EK53003

455 HP 1650 PT 5EK53004 & 129-0265 129-0269 47 AUG95
UP

455 HP 1650 PT 5EK00001 – 126-4447 126-4449 28 JUN95
BRAKESAVER 5EK53003

455 HP 1650 PT 5EK53004 & 129-0271 129-0276 48 AUG95
BRAKESAVER UP

********* 455HP 1650 PT HIGH RPM PERFORANCE — FLASH ONLY ***********

455 HP 1650 PT 5EK00001 – 130-8365 27 AUG95
5EK53003
455 HP 1650 PT 5EK00001 & 130-8367 28 AUG95
BRAKESAVER UP

********************************************************************

475 HP 1650 PT 5EK00001 & 129-0178 129-0181 8 AUG95
UP

475 HP 1650 PT 5EK00001 & 129-0183 129-0186 24 AUG95
BRAKESAVER UP

475 HP 1750 PT 5EK00001 & 129-0189 129-0192 25 AUG95
UP

475 HP 1750 PT 5EK00001 & 129-0193 129-0196 26 AUG95
BRAKESAVER UP

********* 475HP 1750 PT HIGH RPM PERFORANCE — FLASH ONLY ***********

475 HP 1750 PT 5EK00001 & 128-6848 25 JUN95
UP
475 HP 1750 PT 5EK00001 & 128-6851 26 JUN95
BRAKESAVER UP

********************************************************************

500 1850 PT 5EK00001 & 129-0217 129-0219 9 AUG95
UP

500 HP 1850 PT 5EK00001 & 129-0220 129-0224 32 AUG95
BRAKESAVER UP

********* 500 HP 1850 PT HIGH RPM PERFORANCE — FLASH ONLY ***********

500 HP 1850 PT 5EK00001 & 126-3887 9 JUN95
UP

500 HP 1850 PT 5EK00001 & 128-6569 32 JUN95
BRAKESAVER UP

*********************************************************************

****** September Availability ***************************************

550 HP 1850 PT 5EK00001 & 126-8385 126-8387 41 AUG95
UP

550 HP 1850 PT 5EK00001 & 126-9517 126-9519 42 AUG95
BRAKESAVER UP

*********************************************************************

OIL WELL SERVICE

435/500 HP 5EK01185 & 126-4486 126-4488 38 JUN95
1550/1650 PT UP

================================================================================
3406E LOW NOX KIT FLASH FIILE CROSS REFERENCE
Updated February 21, 2001

Note: The LOW NOx FLASH files each have an interlock code which has been
incremented by 300, compared to the interlock code of the original
production FLASH file it is replacing. For example, FLASH file 185-1177,
with an interlock code of 333, replaces the DEC98 PSO FLASH file 170-8128,
which had an interlock code of 33.
***************************************************************************
ENGINE RATING/ SERIAL NO. FLASH RELEASE
APPLICATION INFORMATION RANGE FILE IC DATE
***************************************************************************
310 HP 1150 PT 5EK05767 & UP 185-1177 333 DEC99
6TS00001 & UP

310 HP 1250 PT 5EK05767 & UP 185-1178 334 DEC99
6TS00001 & UP

310 HP 5EK05767 & UP 185-1179 335 DEC99
1150/1350@1200 6TS00001 & UP

330 HP 1350 PT 5EK05767 & UP 185-1180 336 DEC99
6TS00001 & UP

355 HP 1350 PT 5EK05767 & UP 185-1181 322 DEC99
(Still used on steel pistons) 6TS00001 & UP

355 HP 1350 PT 208.5 Fan On 5EK05767 & UP 185-1182 322 DEC99
(Still used on steel pistons) 6TS00001 & UP

355 HP 1350@1200 5EK05767-80006 185-1181 322 DEC99
Aluminum pistons (was 170-8174)

355 HP 1350 PT 208.5 Fan On 5EK05767-80006 185-1182 322 DEC99
Aluminum pistons (was 170-8175)

355 HP 1350/1450PT MULTI-TORQUE 5EK05767 & UP 185-1183 323 DEC99
(Still used on steel pistons) 6TS00001 & UP

355 HP 1350/1450PT MULTI-TORQUE 5EK05767 & UP 185-1184 323 DEC99
208.5 Fan On 6TS00001 & UP
(Still used on steel pistons)

355 HP 1350/1450 PT MULTI-TORQUE 5EK05767-80006 185-1184 323 DEC99
Aluminum Pistons (was 170-8173)

355 HP 1350/1450 PT MULTI-TORQUE 5EK05767-80006 185-1184 323 DEC99
208.5 Fan On Aluminum Pistons
(was 170-8182)

375 HP 1450 PT 5EK05767 & UP 185-1186 355 DEC99
PAN WESTERN SPECIAL 6TS00001 & UP

375 HP 1450@1200 Aluminum pistons 5EK05767-80006 185-1185 320 DEC99
(was 170-8177)

375 HP 1450 PT 5EK05767 & UP 185-1185 320 DEC99
(Still used on steel pistons) 6TS00001 & UP

375HP 1450@1200 Multi-Torque 5EK05767-80006 185-1187 321 DEC99
Aluminum pistons (was 170-8111)

375 HP 1450/1550PT MULTI-TORQUE 5EK05767 & UP 185-1187 321 DEC99
(Still used on steel pistons) 6TS00001 & UP

375/435 HP MULTI-TORQUE 5EK67193 & UP 186-9901 367 DEC99
6TS00001 & UP

375/435 HP 1450/1650 5EK67193 & UP 186-9903 381 DEC99
Top Gear Only Multi-Torque 6TS00001 & UP

375/435 HP 1450/1650 PT 5EK67193 & UP 186-9902 428 DEC99
Multi-Torque 6TS00001 & UP

410 HP 1450@1200 Aluminum pistons 5EK05767-67192 185-1188 319 DEC99
(was 170-8176)

410 HP 1450 PT 5EK05767-67192 185-1188 319 DEC99
(Still used on steel pistons)

410 HP Brakesaver 1450@1200 5EK05767-67192 185-1189 329 DEC99
Aluminum pistons (was 170-8179)

410 HP 1450 PT BRAKESAVER 5EK05767-67192 185-1189 329 DEC99
(Still used on steel pistons)

410 HP 1550@1200 Aluminum pistons 5EK05767-67192 185-1190 330 DEC99
(was 170-8180)

410 HP 1550 PT 5EK05767-67192 185-1190 330 DEC99
(Still used on steel pistons)

410 HP Brakesaver 1550@1200 5EK05767-67192 185-1191 331 DEC99
Aluminum pistons (was 170-8181)

410 HP 1550 PT BRAKESAVER 5EK05767-67192 185-1191 331 DEC99
(Still used for steel pistons)

410 HP 1450/1550@1200 5EK67192&80006 186-9904 368 DEC99
Aluminum pistons (was 170-8183)

410 HP 1450/1550 5EK67193 & UP 186-9904 368 DEC99
(Still used on steel pistons) 6TS00001 & UP

410 HP Brakesaver 1450/1550@1200 5EK67193-80006 186-9905 369 DEC99
Aluminum pistons (was 170-8184)

410 HP 1450/1550 BRAKESAVER 5EK67193 & UP 186-9905 369 DEC99
(Still used on steel pistons) 6TS00001 & UP
*************************************************************************
ALLISION AUTO TRANSMISSION:
435 HP 1450 PT 5EK75900 & UP 186-9908 377 DEC99
6TS00001 & UP
*************************************************************************
435 HP 1550 PT 5EK05767-53003 185-1192 317 DEC99

435 HP 1550 PT 5EK53004-67192 185-1198 343 DEC99

435 HP 1550 PT BRAKESAVER 5EK05767-53003 185-1193 318 DEC99

435 HP 1550 PT BRAKESAVER 5EK53004-67192 185-1199 344 DEC99

435 HP 1650 PT 5EK05767-53003 185-1194 315 DEC99

435 HP 1650 PT 5EK53004-67192 185-1200 345 DEC99

435 HP 1550/1650 @ 1800/2100 5EK67193 & UP 186-9906 359 DEC99
6TS00001 & UP

435 HP 1650 PT BRAKESAVER 5EK05767-53003 185-1195 316 DEC99

435 HP 1650 PT BRAKESAVER 5EK53004-67192 185-1201 346 DEC99

435 HP 1550/1650 @ 1800/2100 5EK67193 & UP 186-9907 360 DEC99
BRAKESAVER 6TS00001 & UP

435@1800 Dual HP for PTO 5EK67193 & UP 185-1204 338 DEC99
500@2100 or 435@2100 6TS00001 & UP
*************************************************************************
435HP 1650 PT HIGH RPM PERFORMANCE – FIELD UPRATE ONLY, FLASH ONLY:

435 HP 1650 PT 5EK05767-53003 185-1196 315 DEC99

435 HP 1650 PT BRAKESAVER 5EK05767-53003 185-1197 316 DEC99

435 HP 1650 PT 5EK53004-67192 185-1202 345 DEC99

435 HP 1650 PT BRAKESAVER 5EK53004-67192 185-1203 346 DEC99
*************************************************************************
455 HP 1650 PT 5EK05767-53003 185-1205 327 DEC99

455 HP 1650 PT 5EK53004-67192 185-1209 347 DEC99

455 HP 1650 PT 5EK67193 & UP 186-9910 357 DEC99
@ 1800/2100 6TS00001 & UP

455 HP 1650 PT BRAKESAVER 5EK05767-53003 185-1206 328 DEC99

455 HP 1650 PT BRAKESAVER 5EK53004-67192 185-1210 348 DEC99

455 HP 1650 PT @ 1800/2100 5EK67193 & UP 186-9911 358 DEC99
BRAKESAVER 6TS00001 & UP

455 MT 1550/1750 5EK67193 & UP 186-9912 379 DEC99
6TS00001 & UP

455 MT (BS) 5EK67193 & UP 186-9913 380 DEC99
1550/1750 PT 6TS00001 & UP
*************************************************************************
455HP 1650 PT HIGH RPM PERFORMANCE – FIELD UPRATE ONLY, FLASH ONLY:

455 HP 1650 PT 5EK05767-53003 185-1207 327 DEC99

455 HP 1650 PT BRAKESAVER 5EK05767-53003 185-1208 328 DEC99

455 HP 1650 PT 5EK53004-67193 185-1211 347 DEC99

455 HP 1650 PT BRAKESAVER 5EK53004-67193 185-1212 348 DEC99

475 HP 1650 PT 5EK05767-67192 185-1213 308 DEC99

475 HP 1650 PT BRAKESAVER 5EK05767-67192 185-1214 324 DEC99

475 HP 1750 PT 5EK05767-67192 185-1215 325 DEC99

475 HP 1750 PT BRAKESAVER 5EK05767-67192 185-1216 326 DEC99

475 HP 1650/1750 @ 1800/2100 5EK67193 & UP 186-9914 350 DEC99
6TS00001 & UP

475 HP 1650/1750 @ 1800/2100 5EK67193 & UP 186-9915 351 DEC99
BRAKESAVER 6TS00001 & UP
*************************************************************************
475HP 1750 PT HIGH RPM PERFORMANCE – FIELD UPRATE ONLY, FLASH ONLY:

475 HP 1750 PT 5EK05767-67192 185-1217 325 DEC99

475 HP 1750 PT BRAKESAVER 5EK05767-67192 185-1218 326 DEC99
*************************************************************************
475/500 HP 1650/1850 PT 5EK67193 & UP 186-9918 382 DEC99
MULTI-TORQUE 6TS00001 & UP

475/500 HP 1650/1850 PT 5EK67193 & UP 186-9919 383 DEC99
MULTI-TORQUE BRAKESAVER 6TS00001 & UP

475/500 HP 1650/1750 5EK67193 & UP 186-9916 436 DEC99
TOP TWO GEARS ONLY MULTI-TORQUE 6TS00001 & UP
FIELD UPRATE ONLY

475/500 HP 1650/1750 BRAKESAVER 5EK67193 & UP 186-9917 437 DEC99
TOP TWO GEARS ONLY MULTI-TORQUE 6TS00001 & UP
FIELD UPRATE ONLY

500 HP 1450 PT MOTORHOME 5EK67193 & UP 186-9920 354 DEC99
6TS00001 & UP

500 HP 1650 PT 5EK67193 & UP 204-3504 474 FEB01
6TS00001 & UP

500 HP 1750 @ 1200 BRAKESAVER 5EK67193 & UP 186-9923 395 DEC99
FLEET RATING 6TS00001 & UP
WARNING: ONCE THIS IS FLASHED THE INTERLOCK IS FROZEN AND CANNOT BE CHANGED

500 HP 1750 @ 1200 5EK67193 & UP 186-9922 394 DEC99
FLEET RATING 6TS00001 & UP
WARNING: ONCE THIS IS FLASHED THE INTERLOCK IS FROZEN AND CANNOT BE CHANGED

500 1850 PT 5EK05767-67192 185-1219 309 DEC99

500 1850 PT @ 1800/2100 5EK67193 & UP 186-9924 361 DEC99
6TS00001 & UP

500 1850 PT @ 1800/2100 5EK67193 & UP 185-1225 432 DEC99
2300RPM TEL FIELD UPRATE ONLY 6TS00001 & UP

500 HP 1850 PT BRAKESAVER 5EK05767-67192 185-1220 332 DEC99

500 HP 1850 PT @ 1800/2100 5EK67193 & UP 186-9925 362 DEC99
BRAKESAVER 6TS00001 & UP

500 HP 1850 PT @ 1800/2100 BRKSVR 5EK67193 & UP 185-1226 433 DEC99
2300RPM TEL FIELD UPRATE ONLY 6TS00001 & UP
*************************************************************************
500 HP 1850 PT HIGH RPM PERFORMANCE – FIELD UPRATE ONLY, FLASH ONLY:

500 HP 1850 PT 5EK05767-67192 185-1221 309 DEC99

500 HP 1850 PT BRAKESAVER 5EK05767-67192 185-1222 332 DEC99
*************************************************************************
550 HP 1850 PT @ 2100 5EK05767 & UP 185-1223 341 DEC99
6TS00001 & UP

550 HP 1850 PT @ 2100 5EK67193 & UP 186-9926 434 DEC99
2300RPM TEL FIELD UPRATE ONLY 6TS00001 & UP

550 HP 1850 PT @ 2100 5EK05767 & UP 185-1224 342 DEC99
BRAKESAVER 6TS00001 & UP

550 HP 1850 PT @ 2100 BRKSVR 5EK67193 & UP 186-9927 435 DEC99
2300RPM TEL FIELD UPRATE ONLY 6TS00001 & UP
*************************************************************************
OIL WELL SERVICE (OWS)
435/500 HP 1550/1650 PT OWS 5EK05767 & UP 185-1204 338 DEC99

435/500 HP OWS 5EK05767 & UP 186-9909 376 DEC99
*************************************************************************
355 HP 1350PT 1800/2100 1LW00001 & UP 192-5311 399 APR00

355 HP MULTI-TORQUE 1350/1450 1LW00001 & UP 192-5312 401 APR00
1800/2100

375 HP 1450PT 1800/2100 1LW00001 & UP 192-5313 405 APR00

375 HP MULTI-TORQUE 1450/1550 1LW00001 & UP 192-5314 406 APR00
1800/2100

375/435 HP MULTI-TORQUE 1LW00001 & UP 192-5315 409 APR00
1450/1550 PT 1800
1450/1650 PT 1800

375/435 HP 1450/1550 PT 1800 RPM 1LW00001 & UP 192-5316 459 APR00
TOP TWO GEARS ONLY MULTI-TORQUE
FIELD UPRATE ONLY

375/435 HP 1450/1650PT 1LW00001 & UP 192-5317 410 APR00
1800 MULTI-TORQUE IN
TOP GEAR ONLY (ROCKWELL)

410 HP FIELD UPRATE ONLY 1LW00001 & UP 192-5318 407 APR00
1450/1550PT 1800/2100

435 HP 1550/1650PT 1800/2100 1LW00001 & UP 192-5320 411 APR00

435 HP 1550/1650PT 1LW00001 & UP 192-5321 412 APR00
1800/2100 BRAKESAVER

450 HP 1550/1650PT 2100 1LW00001 & UP 192-5319 452 APR00
(FIELD UPRATE ONLY FOR 410HP & BELOW)

455 HP 1550PT 2100 1LW00001 & UP 192-5322 438 APR00

455 HP 1550 PT 1LW00001 & UP 192-5323 439 APR00
2100 BRAKESAVER

455 HP 1650PT 1800/2100 1LW00001 & UP 192-5324 413 APR00

455 HP 1650PT 1800/2100 1LW00001 & UP 192-5325 414 APR00
BRAKESAVER

455 HP MULTI-TORQUE 1LW00001 & UP 192-5326 415 APR00
1550/1750PT 2100

455 HP MULTI-TORQUE 1LW00001 & UP 192-5327 416 APR00
1550/1750PT 2100 BRAKESAVER

475 HP 1650/1750PT 1800/2100 1LW00001 & UP 192-5328 419 APR00

475 HP 1650/1750PT 1LW00001 & UP 192-5329 420 APR00
1800/2100 BRAKESAVER

475/500 HP 1650/1750PT 2100 RPM 1LW00001 & UP 192-5330 455 APR00
TOP TWO GEARS ONLY MULTI-TORQUE
FIELD UPRATE ONLY

475/500 HP 1650/1750PT 2100 RPM 1LW00001 & UP 192-5331 456 APR00
TOP TWO GEARS ONLY MULTI-TORQUE
BRAKESAVER FIELD UPRATE ONLY

475/500 HP 1650/1850PT 2100 RPM 1LW00001 & UP 192-5332 417 APR00
MULTI-TORQUE TOP 2 GEARS ONLY

475/500 HP 1650/1850PT 2100 RPM 1LW00001 & UP 192-5333 418 APR00
MULTI-TORQUE TOP 2 GEARS ONLY
BRAKESAVER

500 HP 1650PT 2100 RPM 1LW00001 & UP 192-5334 462 APR00

500 HP FLEET 1750PT 2100 RPM 1LW00001 & UP 192-5335 425 APR00
WARNING: ONCE FLASHED THE INTERLOCK IS FROZEN AND CANNOT BE CHANGED

500 HP FLEET 1750PT 2100 RPM 1LW00001 & UP 192-5336 426 APR00
BRAKESAVER
WARNING: ONCE FLASHED THE INTERLOCK IS FROZEN AND CANNOT BE CHANGED

500 HP 1850PT 1800/2100 1LW00001 & UP 192-5337 421 APR00

500 HP 1850PT 1800/2100 1LW00001 & UP 192-5339 441 APR00
2300 RPM TEL FIELD UPRATE ONLY

500 HP 1850PT 1800/2100 1LW00001 & UP 192-5338 422 APR00
BRAKESAVER

500 HP 1850PT 1800/2100 BRAKESAVER 1LW00001 & UP 192-5340 442 APR00
2300 RPM TEL FIELD UPRATE ONLY

550 HP 1850PT 2100 RPM 1LW00001 & UP 192-5341 423 APR00

550 HP 1850PT 2100 RPM 1LW00001 & UP 192-5343 443 APR00
2300 RPM TEL FIELD UPRATE ONLY

550 HP 1850PT 2100 RPM BRAKESAVER 1LW00001 & UP 192-5342 424 APR00

550 HP 1850PT 2100 RPM BRAKESAVER 1LW00001 & UP 192-5344 444 APR00
================================================================================
F 3406E/3456/C15/C16/C18 FLASH FILE CROSS REFERENCE

Updated January 15, 2008 ajk

This file covers 3406E Truck engines (5DS/2WS/1LW/1MM), and 3406E/3456/C15/C18
Commercial/Machine applications.

NOTE:

Most of the original flash files for 5EK/6TS/1LW 3406E engines have been
removed from SIS Web. They have been replace by Low NOx files. See the
Low NOx files text.

WARNING!!!

The original personality modules in some 3176B and 3406E engines between
9CK1 – 5000 and 5EK1 – 5000 can NOT be flashed with NOV95 software. The
Flash program may terminate at 20 to 25% complete when attempting to flash
these personality modules with NOV95 software.

Many of the personality modules in the affected serial number range can
be flashed with NOV95 software because the original personality module
was replaced with a compatible one during an earlier software update or
ECM replacement. However, before attempting to flash the personality
modules on engines in the affected range, make sure that there is a
106-9184 personality module available. If the flash attempt fails, try
again. If both attempts terminate at 20 to 25% complete, replace the
personality module with the 106-9184 module and repeat the flash
programming.

Since the flash process erases the file from the personality module
before programming it, a failure while flashing the personality module
in the affected range will render the engine inoperable. Once this
occurs, there are two options; 1) replace the personality module with a
106-9184 module and re-flash or 2) flash the original personality module
with pre-NOV95 software.

***************************************************************************
ENGINE RATING/ SERIAL NO. FLASH RELEASE
APPLICATION INFORMATION RANGE FILE IC DATE
***************************************************************************

355 HP 1350 PT 5EK00001-01820 170-8096 6 DEC98

355 HP 1450@1200 Multi-Torque 5EK00001-01820 170-8185 7 DEC98
Aluminum pistons

355 HP 1350/1450PT MULTI-TORQUE 5EK00001-01820 170-8097 7 DEC98
(Still used on steel pistons)

375 HP 1450 PT 5EK00001-01820 170-8098 4 DEC98

375 HP 1450/1550PT MULTI-TORQUE 5EK00001-01820 170-8099 10 DEC98

435 HP 1450 PT 5EK00549-01184 170-8102 11 DEC98

435 HP 1550 PT 5EK00549-01184 170-8103 12 DEC98

435 HP 1650 PT 5EK00001-00548 170-8100 3 DEC98

435 HP 1650 PT 5EK00549-01184 170-8104 13 DEC98

*************************************************************************

575 HP 1850PT 2100 RPM 5DS00324 & UP 170-8228 167 DEC98
For use with 159-8542 or 0R-7275 Turbo Group

575 HP 1850PT 2100 RPM BRAKESAVER 5DS00324 & UP 170-8229 168 DEC98
For use with 159-8542 or 0R-7275 Turbo Group

600 HP 2050PT 2100 RPM 5DS00001-00323 170-8230 96 DEC98
For use with 138-3200 or 0R-7176 Turbo Group

600 HP 2050PT 2100 RPM 5DS00324 & UP 170-8232 160 DEC98
For use with 159-8542 or 0R-7275 Turbo Group

600 HP 2050PT 2100 RPM 5DS00001-00323 170-8238 145 DEC98
2300RPM TEL FIELD UPRATE ONLY
For use with 138-3200 or 0R-7176 Turbo Group

600 HP 2050PT 2100 RPM BRAKESAVER 5DS00001-00323 170-8231 97 DEC98
For use with 138-3200 or 0R-7176 Turbo Group

600 HP 2050PT 2100 RPM BRAKESAVER 5DS00324 & UP 170-8233 161 DEC98
For use with 159-8542 or 0R-7275 Turbo Group

600 HP 2050PT 2100 RPM BRAKESAVER 5DS00001-00323 170-8239 146 DEC98
2300RPM TEL FIELD UPRATE ONLY
For use with 138-3200 or 0R-7176 Turbo Group

600 HP 2050PT 2100 RPM 5DS00324 & UP 170-8240 170 DEC98
2300RPM TEL FIELD UPRATE ONLY
For use with 159-8542 or 0R-7275 Turbo Group

600 HP 2050PT 2100 RPM BRAKESAVER 5DS00324 & UP 177-0097 171 DEC98
2300RPM TEL FIELD UPRATE ONLY
For use with 159-8542 or 0R-7275 Turbo Group
**************************************************************************
***************************************************************************
14 LITER Lo-HP 2WS ENGINE SERIAL NO. FLASH RELEASE
RATING INFORMATION RANGE FILE IC DATE
***************************************************************************

355HP 1350PT 1800/2100RPM 2WS00001 & UP 215-7824 14 MAR02

355HP MT 1350/1450PT 1800 RPM 2WS00001 & UP 215-7825 15 MAR02
1350/1450PT 2100 RPM

375HP 1450PT 1800/2100RPM 2WS00001 & UP 215-7826 16 MAR02

375/435HP MT 1450/1550PT 1800PRM 2WS00001 & UP 215-7828 9 MAR02
1450/1650PT 1800 RPM

375HP MT 1450/1550PT 1800RPM 2WS00001 & UP 215-7826 17 MAR02
1450/1550PT 2100RPM

375/435HP 1450/1550PT 1800 RPM 2WS00001 & UP 215-7829 19 MAR02
TOP 2 GEAR MULTITORQUE

375/435HP 1450/1650PT 1800 RPM 2WS00001 & UP 215-7830 20 MAR02
TOP 1 GEAR MULTITORQUE

410HP 1450/1550PT 1800/2100RPM 2WS00001 & UP 215-7831 21 MAR02
FIELD UPRATE ONLY

450HP 1550/1650PT 2100RPM 2WS00001 & UP 215-7834 22 MAR02
FIELD UPRATE ONLY
***************************************************************************
14 LITER Hi-HP 2WS ENGINE SERIAL NO. FLASH RELEASE
RATING INFORMATION RANGE FILE IC DATE
***************************************************************************
435HP 1550/1650PT 1800/2100RPM 2WS00001 & UP 215-7832 23 MAR02

435HP 1550/1650PT 1800/2100RPM 2WS00001 & UP 215-7833 24 MAR02
BRAKESAVER

435/500HP 1550/1650 2100RPM 2WS00001 & UP 215-7846 61 MAR02
MULTITORQUE

455HP 1550PT 2100RPM OR 2WS00001 & UP 215-7835 25 MAR02
1650PT 1800/2100RPM

455HP 1550PT 2100RPM OR 2WS00001 & UP 215-7836 26 MAR02
1650PT 1800/2100RPM BRAKESAVER

455HP MT 1550/1750PT 2100 RPM 2WS00001 & UP 215-7837 27 MAR02

455HP MT 1550/1750PT 2100 RPM 2WS00001 & UP 215-7838 28 MAR02
BRAKESAVER

475HP 1650/1750PT 1800/2100RPM 2WS00001 & UP 270-7080 2 APR05
REPLACED 251-2224

475HP 1650/1750PT 1800/2100RPM 2WS00001 & UP 270-7079 30 APR05
BRAKESAVER
REPLACED 251-2223

475/500HP 1650/1850PT 2100 RPM 2WS00001 & UP 215-7841 31 MAR02
TOP 2 GEAR MULTITORQUE

475/500HP 1650/1850PT 2100 RPM 2WS00001 & UP 215-7842 32 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

475/500HP 1650/1750PT 2100 RPM 2WS00001 & UP 215-7843 33 MAR02
TOP 2 GEAR MULTITORQUE

475/500HP 1650/1750PT 2100 RPM 2WS00001 & UP 215-7844 34 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

500HP 1650PT 2100RPM, 2WS00001 & UP 215-7845 35 MAR02
500HP FLEET 1750PT 2100RPM or
435/500HP 1550/1650 OIL WELL SERVICE

500HP 1650PT 2100RPM BRAKESAVER 2WS00001 & UP 215-7848 36 MAR02
OR 500HP FLEET 1750PT 2100RPM BRAKESAVER

500HP 1850PT 1800/2100RPM 2WS00001 & UP 215-7852 37 MAR02
2300RPM TEL FIELD UPRATE ONLY

500HP 1750/1850PT 2100 RPM 2WS00001 & UP 215-7850 39 MAR02
TOP 2 GEAR MULTITORQUE

500HP 1750/1850PT 2100 RPM 2WS00001 & UP 215-7851 40 MAR02
TOP 2 GEAR MULTITORQUE BRAKESAVER

500HP 1850PT 1800/2100RPM 2WS00001 & UP 215-7847 59 MAR02

500HP 1850PT 1800/2100RPM 2WS00001 & UP 215-7849 60 MAR02
BRAKESAVER

500HP 1850PT 1800/2100RPM 2WS00001 & UP 215-7853 38 MAR02
BRAKESAVER 2300RPM TEL FIELD UPRATE ONLY

550HP 1850PT 2100RPM 2WS00001 & UP 270-7085 41 APR05
REPLACED 251-2229

550HP 1850PT 2100RPM BRAKESAVER 2WS00001 & UP 270-7086 42 APR05
REPLACED 251-2230

550HP 1850PT 2100RPM 2WS00001 & UP 270-7081 43 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 251-2225

550HP 1850PT 2100RPM BRAKESAVER 2WS00001 & UP 270-7082 44 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 251-2226
***************************************************************************
16 LITER 1MM ENGINE SERIAL NO. FLASH RELEASE
RATING INFORMATION RANGE FILE IC DATE
***************************************************************************
575HP 1850PT 2100RPM 1MM00001 & UP 215-7858 45 MAR02

575HP 1850PT 2100RPM BRAKESAVER 1MM00001 & UP 215-7859 46 MAR02

575HP 1850PT 2100RPM 1MM00001 & UP 215-7861 47 MAR02
2300RPM TEL FIELD UPRATE ONLY

575HP 1850PT 2100RPM BRAKESAVER 1MM00001 & UP 215-7860 48 MAR02
2300RPM TEL FIELD UPRATE ONLY

575/600HP MT 1850/2050PT 2100RPM 1MM00001 & UP 215-7862 49 MAR02

575/600HP MT 1850/2050PT 2100RPM 1MM00001 & UP 215-7863 50 MAR02
BRAKESAVER

600HP 2050PT 2100RPM 1MM00001 & UP 270-7083 4 APR05
REPLACED 215-7864,237-0693,
241-0808,251-2227

600HP 2050PT 2100RPM BRAKESAVER 1MM00001 & UP 270-7084 52 APR05
REPLACED 215-7865,237-0694,
241-0809,251-2228

600HP 2050PT 2100RPM 1MM00001 & UP 270-7087 53 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 215-7866,237-0697,241-0812,251-2231

600HP 2050PT 2100RPM BRAKESAVER 1MM00001 & UP 270-7088 54 APR05
2300RPM TEL FIELD UPRATE ONLY
REPLACED 215-7867,237-0698,
241-0813,251-2232
***************************************************************************
3406E/3456/C-15/C18 INDUSTRIAL ENGINE FILE CROSS REFERENCE:

ENGINE/ FLASH SERVICE RELEASE
APPLICATION FILE MODULE DATE

3406E/IND INTERLOCK CODE=78 185-7544 NONE NOV99
325 to 450 HP Ratings
REPLACED 166-8300,177-2395

3406E/IND INTERLOCK CODE=78 194-9708 NONE APR01
Low HP/1800
REPLACED 193-4641

3406E/IND INTERLOCK CODE=56 185-7545 NONE NOV99
325 to 575 HP Ratings
REPLACED 177-2396

3406E/IND INTERLOCK CODE=56 194-9709 NONE APR01
High HP/2100
REPLACED 193-4642

3406E/IND INTERLOCK CODE=56 194-9710 NONE APR01
HIGH HP/2100
For engine serial numbers 6BR00583 and below
Parts service only; Single speed timing sensor
REPLACED 193-4643,
185-7546,177-2397,166-8302,
154-8354,150-8405

3406E/IND INTERLOCK CODE=10 249-7271 NONE JUN04
425 HP/2100
REPLACED 213-4874,209-1601,204-7775,
201-4641, 215-3245,229-0423

3406E/IND INTERLOCK CODE=11 249-7272 NONE JUN04
525 HP/2100
REPLACED 211-0159,209-1602,204-7776,
201-4642, 215-3246,229-0424

3406E/IND INTERLOCK CODE=13 249-7275 NONE JUN04
475 HP/2100
REPLACED 213-4891,215-3285,229-0427

3406E/IND INTERLOCK CODE=9 265-4272 NONE AUG05
525 HP/2100
REPLACED 213-4875,209-1603,
201-4643, 215-3247,229-0425,249-7273

3456/IND Interlock Code: 3 193-4646 NONE APR01
500/515/525/550HP @ 1800 RPM
REPLACED 189-3378,185-7550,
177-4634,155-5522

3456/IND Interlock Code: 4 193-4645 NONE APR01
500HP @ 1800 RPM
REPLACED 189-3377,185-7549,
177-4633,155-5524

3456/IND Interlock Code: 6 193-4647 NONE APR01
575HP @ 2100 RPM
REPLACED 189-3379,185-7551,
177-4635,155-5528

3456/IND Interlock Code: 9 193-4650 NONE APR01
525/550HP @ 2100 RPM
REPLACED 189-3382,185-7555,
177-4638,155-5534

3456/EPG Interlock Code: 22 302-7427 NONE SEP06
500eKW/kVA
576 KW @ 1800RPM
REPLACED N/A

3456/EPG Interlock Code: 26 262-8907 NONE NOV04
300eKW/kVA
282kw/1500RPM 360kw/1800RPM
REPLACED 204-7204

3456/EPG Interlock Code: 28 262-8909 NONE NOV04
300eKW/kVA
282kw/1500RPM 360kw/1800RPM
REPLACED 204-7206

3456/EPG Interlock Code: 27 262-8908 NONE NOV04
350eKW/kVA
324kw/1500RPM 408kw/1800RPM
REPLACED 212-8249

3456/EPG Interlock Code: 30 262-8906 NONE NOV04
300EkW XQ300
360kW/1800RPM
REPLACED 203-3259

3456/EPG Interlock Code: 29 262-8910 NONE NOV04
350EkW/kVA
408kW/1800RPM
REPLACED 212-8250

3456/EPG Interlock Code: 17 262-8914 NONE NOV04
450eKW/kVA Certified
412kw/1500RPM 516kw/1800RPM
REPLACED 192-4854,250-8497

3456/EPG Interlock Code: 18 262-8911 NONE NOV04
616HP @ 1800 RPM XQ400
REPLACED 224-6815,250-8494

3456/EPG Interlock Code: 18 262-8912 NONE NOV04
400eKW/kVA Certified
368k/1500RPM 459kw/1800RPM
REPLACED 192-4852,250-8495

3456/EPG Interlock Code: 19 262-8919 NONE NOV04
500ekW/kVA Non-Certified
457kw/1500RPM 576KW/1800
REPLACED 201-0390,250-8502

3456/EPG Interlock Code: 19 262-8920 NONE NOV04
500ekW/kVA Non-Certified XQ500
457kw/1500RPM 576KW/1800
REPLACED 207-3726,250-8503

3456/EPG Interlock Code: 20 262-8915 NONE NOV04
450eKW/kVA Non-Certified
412kw/1500RPM 516kw/1800RPM
REPLACED 192-4860,250-8498

3456/EPG Interlock Code: 21 262-8913 NONE NOV04
400eKW/kVA Non-Certified
368kw/1500RPM 459kw/1800RPM
REPLACED 192-4858,250-8496

3456/EPG Interlock Code: 22 262-8918 NONE NOV04
500ekW Certified
576kw/1800RPM
REPLACED 192-2717,250-8501

3456/EPG Interlock Code: 23 262-8917 NONE NOV04
500kVA Certified
457kw/1500RPM
REPLACED 192-4856,250-8500

3406E/3456/IND Interlock Code: 24 205-8850 NONE FEB01
605/625/630/660HP @ 2100 RPM
REPLACED 203-3211,193-4648

3406E/IND INTERLOCK CODE=8 249-7274 NONE JUN04
500 HP/2100
REPLACED 209-1604, 215-3286,229-0426

3456/IND Interlock Code: 7 193-4649 NONE APR01
515/600HP @ 2100 RPM
REPLACED 189-3381,185-7554,
177-4637,174-7919

3406E/IND INTERLOCK CODE=129 194-9711 NONE APR01
525 HP/2100
REPLACED 193-4644,185-7547,
183-1994,166-8303,157-1443,
154-8220,149-8955

3456/IND INTERLOCK CODE=1 249-7276 NONE JUN04
500-660 HP/2100
REPLACED 211-0160,209-1605,
204-7777,215-3287,229-0428

3456/IND INTERLOCK CODE=3 249-7277 NONE JUN04
600 HP @ 2100 RPM
REPLACED 213-4876,209-1606,
204-7778,201-4872, 215-3288,229-0429

C15/IND INTERLOCK CODE=146 215-7425 —– JUN03
425/450 HP @ 2100 RPM
Replaced 229-0423

C15/IND INTERLOCK CODE=10 316-7381 —– JUN07
540 HP @ 1800 RPM
Replaced 256-3707,267-3419,271-7215,
280-3501,285-3510,294-7320

C15/IND INTERLOCK CODE=20 316-7381 —– JUN07
580 HP @ 1800 RPM
Replaced 256-3707,267-3419,271-7215,
280-3501,285-3510,294-7320

C15/IND INTERLOCK CODE=21 316-7381 —– JUN07
595 HP @ 1800 RPM
Replaced 256-3707,267-3419,271-7215,
280-3501,285-3510,294-7320

C15/IND INTERLOCK CODE=18 302-2371 —– OCT06
440 HP @ 2100 RPM
Replaced 254-7444,271-7213,
280-3499,285-3508

C15/IND INTERLOCK CODE=105 311-2932 —– MAR07
ACERT
475 HP @ 2100 RPM
Replaced N/A

C15/IND INTERLOCK CODE=126 339-0023 —– OCT08
354Kw
475 HP @ 2100 RPM
Replaced N/A

C15/IND INTERLOCK CODE=103 321-5925 —– OCT07
ACERT
540 HP @ 2100 RPM
Replaced 310-5416

C15/IND INTERLOCK CODE=24 254-7449 —– JUL04
ACERT
529 HP @ 2100 RPM
Replaced N/A

C15/IND INTERLOCK CODE=19 302-2372 —– OCT06
475 HP @ 1800 RPM
Replaced 254-7445,271-7214,
280-3500,285-3509

C15 IND TIER 3 CDE ENGINE 397-7270 Jan13
540 HP @ 2100 150
580 HP @ 2100 151
595 HP @ 2011 152

C15 PETRO-MARINE IMO 399-1693 180 JUL13
536HP@1800RPM
Replaced

C15 IND INTERLOCK CODE=148/149 Tier4i 452-1422 —– NOV13
540 HP @ 2100 RPM
580 HP @ 2100 RPM
Replaced 366-7948,373-6691,378-7551,340-3525
366-5916,366-9965,385-1168,395-1115,419-6672

C15/IND INTERLOCK CODE=150,151,152 367-0750 —– Oct10
CX TRANSMISSION ON C15
CDE TIER PETROLEUM ONLY!
40HP@2100RPM,580HP@2100RPM,
595HP@2100RPM
Replaced N/A

C15 EP-GENSET 60HZ 421-1571 29 DEC12
790HP@1800RPM
Replaced 367-1996, 371-5969, 378-3256, 385-1167,
395-3685, 351-4775, 360-4075, 364-3930

C16/DPGDS IND INTERLOCK CODE=10 325-5735 —– MAR08
561HP @ 1500 RPM
669HP @ 1800 RPM
Replaced 234-6098,288-1195,316-7398

C16/IND INTERLOCK CODE=20 273-9198 —– MAY05
500/550/600/630/660 HP @ 2100 RPM
Replaced 252-4872

C18/IND INTERLOCK CODE=25 275-2167 —– MAY05
525 HP @ 2100 RPM
Replaced 254-7443,258-7109

C18/IND INTERLOCK CODE=21 267-3417 —– NOV04
575 HP @ 1800 RPM
Replaced 254-7440

C18/IND INTERLOCK CODE=8 267-3417 —– NOV04
630 HP @ 1800 RPM
Replaced 254-7440

C18/IND ACERT INTERLOCK CODE=9 280-3528 —– SEP05
588 HP @ 2100 RPM
Replaced 240-9679,254-7442,
275-2166,276-2679

C18/IND Tier ABC Tier4i 381-4871 IC AUG11
600 HP @ 1900 RPM 205/206
630 HP @ 1900 RPM 207
Replaced 375-8515

C18/IND ACERT INTERLOCK CODE=10 254-7450 —– JUL04
630 HP @ 2100 RPM
Replaced N/A

C18/IND INTERLOCK CODE=12 296-2721 —– JUN06
700 HP @ 1800 RPM
Replaced 256-1389,267-3418,290-0410

C18/IND INTERLOCK CODE=157 365-6497 —– Nov10
700 HP @ 2100 RPM
Replaced N/A

C18/IND C2 Tier4i INTERLOCK CODE=201 N/A —– JUL11
755 HP @ 1900 RPM
Replaced 372-8631,

C18/IND C3 Tier4i INTERLOCK CODE=200 380-8365 —– AUG11
755 HP @ 1900 RPM
Replaced 372-8631,380-8327

C18/IND C/D Tier4i 419-6678 IC DEC12
755 HP @ 1800 RPM 166
800 HP @ 1800 RPM 169
Replaced 367-3048,380-5958,384-9574, 397-5097

C18 EP – 50Hz LOW BSFC 445-4918 AUG13
728HP@1500RPM 42
793HP@1500RPM 43
838HP@1500RPM 68
Replaces 306-4144,324-0651,377-4460

C18/IND INTERLOCK CODE=33 267-4622 —– DEC04
852 HP @ 1500 RPM
Replaced 255-6265

C18 IND-C3 TIER 419-1648 215 JUL13
755HP@1900RPM
Replaces

EP ENGINE RATING FLASH RELEASE
APPLICATION INFORMATION FILE IC DATE

C15 EP-REG 50Hz ACERT 294-8086 JUN06
365 HP/1500 RPM 37
365 HP/1500 RPM 42
377 HP/1500 RPM 51
377 HP/1500 RPM 52
410 HP/1500 RPM 38
410 HP/1500 RPM 43
455 HP/1500 RPM 39
455 HP/1500 RPM 44
500 HP/1500 RPM 40
500 HP/1500 RPM 45
Replaced 257-3202,264-1223,289-2221

C15 EP-REG 50Hz ACERT 320-2697 Sept10
590 HP/1500 RPM
643 HP/1500 RPM 174
708 HP/1500 RPM 175
Replaced N/A

C15 EP-REG 60Hz ACERT 367-7390 Feb11
568 HP/1800 RPM 26
643 HP/1800 RPM 27
713 HP/1800 RPM 28
787 HP/1800 RPM 29
Replaced 259-6240,282-8301,
291-8568,292-6701,292-9628,
337-5387

C15 EP-REG 60Hz ACERT 288-5930 JAN06
568 HP/1800 RPM 26
643 HP/1800 RPM 27
713 HP/1800 RPM 28
787 HP/1800 RPM 29
865 HP/1800 RPM 30
Replaced N/A

C15 EP-REG 60Hz ACERT 419-9355 29, 30 DEC12
597HP@1400RPM, 671HP@1400RPM, 738HP@1400RPM
Replaced 264-1209,265-7436,
274-9579,282-8302,293-7378,
337-5385,367-7426,377-1480, 388-6444

C15 EP-REG 60Hz ACERT 265-4271 30 OCT05
865 HP/1800 RPM
Replaced N/A

C15 EP 50Hz LOW EMIS ACERT 310-7890 MAR07
365 HP/1500 RPM 37
377 HP/1500 RPM 51
410 HP/1500 RPM 38
455 HP/1500 RPM 39
500 HP/1500 RPM 40
Replaced 287-1743

C15 EP-REG 60Hz LOW BFSC ACERT 290-8052 MAR06
320 HP/1800 RPM 31
365 HP/1800 RPM 32
410 HP/1800 RPM 33
455 HP/1800 RPM 34
500 HP/1800 RPM 35
Replaced 257-3200

C15 Petro-Genset 60HZ 421-8968 30 DEC12
787 HP/1800 RPM Replaced 367-3831
Replaced 367-3831,380-5434,385-7866,397-3922

C15 EP-REG 60Hz SWITCH ACERT 359-4790 46 Nov10
624 HP/1800 RPM
Replaced 293-5082

C18 EP-REG 60Hz 861 HP/1800 RPM 265-8974 6 OCT04
Replaced 252-9278

C18 EP-REG 60Hz 923 HP/1800 RPM 265-8974 7 OCT04
Replaced 252-9278

C18 EP-NREG 60Hz 861 HP/1800 RPM 265-8975 8 OCT04
Replaced 252-9279

C18 EP-NREG 60Hz 923 HP/1800 RPM 265-8975 9 OCT04
Replaced 252-9279

C18 EP-REG 50Hz 683 HP/1500 RPM 265-8976 10,44 OCT04
Replaced 252-9280

C18 EP-REG 50Hz 735 HP/1500 RPM 265-8976 11,45 OCT04
Replaced 252-9280

C18 EP-REG 50Hz 794 HP/1500 RPM 265-8976 12,46 OCT04
Replaced 252-9280

C18 EP-REG 50Hz 852 HP/1500 RPM 265-8976 13 OCT04
Replaced 252-9280

C18 EP-REG 50Hz 700 HP/1500 RPM 294-4602 68 AUG06
ACERT
Replaced N/A

C18 EP-50HZ 550 HP/1800 RPM 337-1976 39,40 AUG08
ACERT 600 HP/1800 RPM
Replaced 277-8085

C18 EPG-50HZ 650 HP/ 700 RPM 294-4602 68 AUG06
2806 ACERT 700KVA LOW BSFC 50HZ
TO PROVIDE HOT TEST FOR 2806
Replaced N/A

C18 EP-60HZ 550 HP/1800 RPM 377-4664 34,35 JUN12
ACERT 600 HP/1800 RPM
Replaced 277-8083,302-1866,359-8983
377-4462,

C18 EPG-60HZ 550 HP/ 600 RPM 294-4604 37 AUG06
2806 ACERT 600EKW LOW E 60HZ EPG
TO PROVIDE HOT TEST FOR 2806
Replaced N/A

C18 EP-IND 765 HP/1800 RPM 254-7441 22,23 JUL04
ACERT 785 HP/1800 RPM
Replaced N/A

***************************************************************************
3406E/3456/C-15/C-16/C-18 MACHINE ENGINE FILE CROSS REFERENCE:

ENGINE RATING/ SERIAL NO. FLASH RELEASE
APPLICATION INFORMATION RANGE FILE IC DATE

3406E D8R TTT 6YZ 211-1833 163 JUN01
Track-type Tractor
REPLACED 188-2024,195-6933,201-7240,206-1993

3406E D350E Series II 2XW00001 & UP 174-4884 147 MAR99
ARTICULATED TRUCK

3406E D400E Series II 8PS/9AP 174-4885 88 MAR99
ARTICULATED TRUCK
REPLACED 149-5385,150-4718

C15 365C ACERT STD 447-0881 3 AUG13
433 HP/1800 RPM
Replaced 235-8223,248-4826,255-0906,258-4516,
266-6522,283-3538,361-5083,439-7188

C15 365C ACERT LRC 447-0882 25 AUG13
433 HP/1800 RPM
Replaced 257-7698,266-6523,283-3539,361-5134
439-7189,

C15 IND-A/B TIER 420-4245 146, 147 DEC12
475HP@2100RPM
Replaced 366-7946, 378-7550, 384-9982, 395-1113

C15 IND-403KW/433KW 443-0009 SEP13
540HP@2100RPM 40
581HP@2100RPM 41
Replaces 392-3632,431-1975,440-2369

C15 365D HEX LRC 447-0880 81 AUG13
433HP@1800RPM, 512HP@1800RPM
Replaced 292-2237,349-8622,380-1971,439-7187

C15 374D/ 365C HEX ENGINE 447-0879 82 AUG13
433HP@1800RPM, 512HP@1800RPM
Replaced 302-5880,349-8621,434-9489,

C15 MACH-770 OHT T4F 449-5537 3 OCT13
487HP@1900RPM
Replaces 379-6641, 441-8432,445-7796

C15 MACH-374F HEX 448-2837 2 OCT13
488HP@1700RPM
Replaced 379-5057,433-9005

C15 620E WTS 313-3620 113 MAY07
359/394 HP/1800 RPM
Replaced N/A

C15 657G WTS ACERT 451-8555 17 NOV13
473 HP/1800 RPM
Replaced 235-2805,276-7526,302-8858

C11 ACERT 725 308 HP @ 1800 RPM 268-8084 2 JAN05
ARTICULATED TRUCK
Replaced 233-1768,257-5802

3406E 735 394 HP/2100 RPM 316-9924 6 JUL07
ARTICULATED TRUCK ADEM III
REPLACED 303-8706

3406E 735 394 HP/2100 RPM 316-9924 29 JUL07
ARTICULATED TRUCK ADEM III
Replaced 303-8706

C15 735 408 HP/1700 RPM 275-0632 5 JUN05
ARTICULATED TRUCK Tier 3 ADEM 4
REPLACED 237-9483,247-7765,
257-5804,265-7890,272-9654

C15 735 410 HP/2000RPM 421-8933 25 SEP12
ARTICULATED TRUCK Tier 4
Replaced 347-5497,362-3266,359-9479,366-5919,377-1483,381-6323,386-2956,395-2118,

C15 ACERT 735 436 HP/1700 RPM 310-7055 97 MAR07
ARTICULATED TRUCK
REPLACED 299-5262,306-5125

3406E 740 AXM/AYZ/AZZ 316-9923 7 JUL07
ARTICULATED TRUCK
REPLACED 283-8475

3406E 740 440 HP/2100 RPM 316-9923 30 JUL07
ARTICULATED TRUCK ADEM III
Replaced 283-8475

C15 740 444 HP/2000 RPM 366-5962 26 Mar11
ARTICULATED TRUCK Tier 4
Replaced N/A

C15 740 469 HP/1800 RPM 275-0633 6 JUN05
ARTICULATED TRUCK Tier 3 ADEM 4
REPLACED 247-7766,257-5805,
265-7891,272-9653

C15 740 469 HP/1800 RPM 336-3521 116 May09
ARTICULATED TRUCK Tier 3
REPLACED 320-9657

C15 MACH 740 AT ENGINE PSO 452-1574 26 OCT13
444hp @ 2000rpm
Replaces

C15 MACH-824/825/826 CMP 451-2154 7 OCT13
426HP@1800RPM
Replaces 415-5355

C15 IND-HWT ACERT 280-8987 APR13

C15 740B 444HP/2000RPM
ARTICKULATED TRUCK Tier 4i 446-6675 26 JUL13
Replaced 347-4142,358-4057,361-5912,
359-9269,366-5962,377-1482,381-6322,
386-2955,395-2117,421-8931

C15 MACH-770 LRC OHT 437-4231 4 JUL13
511HP@1800RPM
Replaces 377-3163,386-4242,393-7445

C15 770 OHT ACERT 377-1605 117 May11
460/511 HP/1800 RPM
REPLACED 322-9256,337-6843

C15 770 OHT ACERT 330-9713 9 MAY08
460/511 HP/1800 RPM
REPLACED 217-7750,230-9781,
282-9920,295-4646

C15 MACH-770 LRC OHT Tier3 439-7395 1 JUL13
511 HP/1800RPM
Replaced 366-1378,386-6751,388-7332

3406E 980G WHEEL LOADER 345/2000 RPM 213-9084 1 SEP01
REPLACED 210-4628

3406E 980G WHEEL LOADER 345/2000 RPM 265-8922 1 DEC04
REPLACED 214-3397,
218-2849,226-9692,248-1411

C-15 980GIII WHEEL LOADER 350/1800 RPM 250-0871 1 FEB04
Replaced 226-8791

C15 986H LARGE WHEEL LOADER 423-4330 36 SEP12
449 HP/1800RPM
REPLACED 384-3419,417-9679

3456 988G WHEEL LOADER 520/1900 RPM 223-6513 11 MAY03
REPLACED 167-9620, 198-8516

3456 988G WHEEL LOADER 520/1900 RPM 222-0531 9 NOV02
REPLACED 191-7678, 211-8711, 217-4159

3456 834G/836G COMPACTOR 520/1900 RPM 222-0530 9 MAY02
REPLACED 211-8711,217-4158
(previous file 165-3805 IC 2)

3456 385B/5090B HEX 218-4403 12 DEC01
552 HP/1800 RPM
REPLACED 169-6286,190-8822,210-6088

3456 651/7B & 660 WTS Scraper Retrofit 271-5704 19 FEB05
550 HP/2100 RPM
Replaced 253-5291

C-18 ACERT 834/836H 261-1560 1 NOV04
538 HP/1900 RPM
Replaced 227-1399,249-7370

C15 MACH-82XH LWL 434-9494 2 JUL13
401 HP/1800 RPM
Replaced 242-7007,249-7371,
261-1559,276-8521,303-9556,
338-1926,357-4656,398-4821

3406C MACH 82XC II Retrofit 265-4398 41 OCT05
380 HP/2000 RPM
Replaced 263-3720

C15 MACH 82XC II ACERT 312-7672 111 APR07
362 HP/1800 RPM
Replaced N/A

C-15 MT865 Challenger 512HP/2100 RPM 228-3280 2 DEC02
REPLACED 185-9791, 224-5841

C15 Mach-980G Tier3 Repower 343-4085 130 Apr10
345HP @ 1800RPM
Replaced N/A

C15 ACERT 980H 353-2737 1 APR10
354 HP/1800 RPM
Replaced 260-5493,270-9280,283-0057,
315-4121

C15 ACERT 980H II ACERT 289-4178 67 MAR06
393 HP/1800 RPM
Replaced NA

C15 ACERT 980H MLIT 355-1031 1 APR10
354 HP/1800 RPM
Replaced 282-2076,299-1886
307-6103

C15 ACERT 980H MLIT 353-2736 104 JUL12
363 HP/1800 RPM
Replaced 320-6138,330-4553,332-1441

C18 ACERT 988H 332-9423 3 MAY08
523/555 HP/1800 RPM
Replaced 249-7369,259-6720,266-6517,
289-8580,313-3626

C18 AD55 650HP 2000 RPM 246-8295 6 NOV03
Replaces 229-2777

C18 AD55X RHX00824-UP 253-8992 30 JAN05
650HP 2000 RPM
Replaced N/A

C18 385C Hex 552 HP/1800 RPM 265-8994 4 NOV04
Replaced 248-4827,255-0907,258-4517

C18 MACH – 834K LRC 449-9771 3 AUG13
571HP@1700RPM
Replaces 380-6224,445-1991

C18 988K T4F LRC 449-9753 1 AUG13
527HP@1700RPM
Replaces 380-6205,445-1983

C18 MACH 385C ACERT TT 416-4662 31 JUN12
552 HP/1800 RPM
Replaced 268-3701,306-6864,326-1108
337-6857

C18 MACH 385C ACERT LRC TT 306-6851 32 NOV06
Hex 552 HP/1800 RPM
Replaced 268-3702

C15 MT855 Challenger 462HP/2100 RPM 228-3279 5 DEC02
Replaced 185-9790,224-5840

C18 772E ACERT 377-1606 7 May11
598 HP/1800 RPM
Replaced 219-7187,230-9782,282-9921,
295-4647,317-6046

C15 Reclaimer/Mixer ACERT 288-7107 8 DEC05
540 HP/2100 RPM
Replaced 255-5468,261-7857,273-9193

3406E ELPH AD30 400HP/2200RPM 245-7327 12 JAN04
Replaced 213-4693

3406E MACH 620G WTS 339-7731 178 OCT08
393 HP/1800 RPM
Replaced 230-1559,235-1848,326-3094

C15 ACERT 620G WTS 348-2671 12 May09
359/394 HP/1800 RPM
Replaced 261-1589,268-3892,274-4291,
302-6321,312-2917,328-6012,344-0928

C15 ACERT MT835 Challenger 361HP/2100 RPM 280-3524 23 SEP05
REPLACED 254-7448,258-7111,
275-2170,276-2683

C15 ACERT MT835 ACERT 361HP/2100 RPM 317-5506 95 AUG07
REPLACED 301-2206,313-7644

C15 ACERT MT845 Challenger 412HP/2100 RPM 280-3525 22 SEP05
REPLACED 254-7447,258-7110,
275-2169,276-2682

C15 ACERT MT845 ACERT 412HP/2100 RPM 301-2209 96 SEP06
REPLACED N/A

C15 MT835 AGCO 361HP/2100 RPM 341-7346 119 NOV08
REPLACED 329-0336

C15 MT845/MT945 AGCO 412HP/2100 RPM 341-7347 120 NOV08
REPLACED 329-0338

C15 MT855/MT955 AGCO 474HP/2100 RPM 341-7348 121 NOV08
REPLACED 329-0340

C15 ACERT MT855 Challenger 474HP/2100 RPM 276-2681 13 JUN05
REPLACED 245-6374,254-7446,275-2168

C15 ACERT MT945 Challenger 443HP/2100 RPM 330-8556 73 APR08
REPLACED 264-1227,319-3897

C15 ACERT AD30 II 409 HP/1800 RPM 422-7462 14 APR13
Replaced 250-2816,263-2560,283-3458,336-0965

C15 ACERT PM150 500 HP/1900 RPM 271-7805 69 JUN05
Replaced N/A

C18 ACERT PM201 650 HP/2100 RPM 328-1652 16 MAR08
Replaced 261-1597,266-3709,280-1580

C18 ACERT PM200 575 HP/1900 RPM 293-4851 17 APR06
Replaced 262-8056,273-3889

C18 ACERT PM200 575 HP/1900 RPM 305-5543 66 NOV06
With new injectors
Replaced 300-7641

C18 ACERT AD45B ADT 589 HP/2100 RPM 360-9937 19 APR10
Replaced 250-2818,269-8296,272-5530
323-2034

C18 631G/637G WTS 339-0927 13 NOV08
488/526 HP/1800 RPM
Replaced 227-1401,261-1588,
317-3218,327-1003

C18 657G WTS ACERT 276-7525 20 SEP05
625 HP/1800 RPM
Replaced 227-1403

C18 657G WTS ACERT 295-6949 61 AUG06
592/632 HP/1800 RPM
Replaced N/A

C18 MACH 657E Retrofit 292-2231 APR06
575 HP/2100 RPM 50
600 HP/2100 RPM 51
630 HP/2100 RPM 52
Replaced 283-7241

C-15 R2900GII ACERT 422-7461 15 MAY13
430HP@1900RPM, 436HP@1900RPM, 447HP@1800RPM 68
Replaced 250-2825,255-6215,
261-1598,266-3535,268-4473,283-3427,283-7229

3406E UGM R2900G 378 HP/2100 RPM 283-7228 177 NOV05
PSO (part service only)
Replaced 261-1599,268-4471

3406E MACH-62XD WTS 358 HP/1800 RPM 270-4372 182 FEB05
RETROFIT
Replaced 230-9779

C18 A4 D8T EU config 259KW/1850 RPM 283-1501 16 NOV05
Replaced 238-9189

C15 MACH-D8T TTT NACD 447-0883 4 NOV13
348 HP & 1850RPM
Replaced 390-5245,219-1000,260-5880,264-0451
271-7413,278-0389,298-8545,311-6855,434-3929

C15 MACH-D8T TTT 444-9757 4 OCT13
356HP@1700RPM
Replaced 381-9648,432-8395

C15 MACH-D8T TTT Tier4I 422-8398 31 SEP12
316 HP @ 2000RPM
Replaced 366-5660,367-8634,375-4171
381-2706,386-3186,397-4043

C15 MACH-D8T TTT Tier4I 422-8397 25 SEP12
316 HP @ 2000RPM
Replaced 365-6658,381-2705,385-8109
397-4042

C15 D8T EU ACERT 447-0884 16 NOV13
348 HP @ 1850 RPM
Replaced 253-5150,260-5881,264-0452,
271-7414,277-9742,298-8548,311-6856
390-5246

C15 A4 D8T NACD config 259KW/1850 RPM 219-1000 4 FEB04
Replaced 217-7932

C15 D8T NACD ACERT 311-6855 4 MAR07
348 HP @ 1850 RPM
Replaced 260-5880,264-0451,
271-7413,278-0389,298-8545

C15 MACH 583T ACERT 293-8254 70 APR06
360 HP @ 1850 RPM
Replaced 271-7412,277-9744,291-1618

C15 MACH 587T ACERT 291-1620 53 FEB06
383 HP @ 1850 RPM
Replaced 262-8067,277-9743

C-18 MACH D9T ACERT NACD 311-6857 5 MAR07
464 HP @ 1800 RPM
Replaced 260-5882,267-8346,278-1864,
299-1769

C-18 MACH D9T SS ACERT EU 311-6858 15 MAR07
464 HP @ 1800 RPM
Replaced 260-5883,267-8347,299-1768

C6.6 MACH-559/579 KBL FP 437-0031 13 APR13
173HP@2200RPM
Replaces 367-8633,382-4616,418-6787

***************************************************************************
3406E/Underground Mining 6BR00001-00607 156-9472 84 MAY98
425@2100/400@2100/360@2100

3406E/Underground Mining 6BR00755 & UP 153-6329 85 OCT97
500@2100/490@2000/
475@2100/450@2100
***************************************************************************

3406E EPG (GENSET) 60Hz 492KW@1800 134-8462 86 JUL96
3406E EPG SER North America 149-9175 150 MAR98
660HP@1800, 535HP@1500

3456 EPG DPGDS 211-5162 10 AUG01
561HP@1500RPM 669HP/1800RPM
REPLACES 200-8621

***************************************************************************
3406E/C15/C18 Marine Engine FLASH Files
***************************************************************************
3406E Marine E Tier 271-8690 40 MAY05
800 HP @ 2300 RPM
REPLACED 198-7491,208-1302,
227-3843,234-4970,248-8771

3406E Marine D Tier 271-8689 72 MAY05
700 HP @ 2200 RPM
REPLACED 198-7490, 208-1301,
227-3842, 234-4969,248-8770

3406E Marine C Tier 271-8688 73 MAY05
600 HP @ 2100 RPM
REPLACED 198-7489, 208-1300,
227-3841, 234-4968,248-8769

3406E Marine B Tier 271-8687 74 MAY05
550 HP @ 2100 RPM/475 HP @ 1800 RPM
REPLACED 198-7488, 208-1299,
227-3840, 234-4967,248-8768

3406E Marine A Tier 271-8686 75 MAY05
450 HP @ 2100 RPM
REPLACED 198-7487, 208-1298,
227-3839, 234-4966,248-8767

3406E Marine E Tier W/ACERT HEAD 271-8685 40 MAY05
800 HP @ 2300 RPM
REPLACED 248-8781

3406E Marine D Tier W/ACERT HEAD 271-8684 72 MAY05
700 HP @ 2200 RPM
REPLACED 248-8780

3406E Marine C Tier W/ACERT HEAD 271-8683 73 MAY05
600 HP @ 2100 RPM
REPLACED 248-8779

3406E Marine B Tier W/ACERT HEAD 271-8682 74 MAY05
550 HP @ 2100 RPM
475 HP @ 1800 RPM
REPLACED 248-8778

3406E Marine A Tier W/ACERT HEAD 271-8681 75 MAY05
450 HP @ 2100 RPM
REPLACED 248-8777

3406E Marine E Tier 262-1969 35 OCT04
800 HP @ 2300 RPM
REPLACED N/A

3406E Marine E Tier PSO 307-9876 35 JAN07
800 HP @ 2300 RPM
REPLACED 293-7540

3406E Marine D Tier 307-9877 36 JAN07
700 HP @ 2200 RPM
REPLACED 262-1970,293-7539

3406E Marine C Tier 307-9878 37 JAN07
600 @ 2100 RPM
REPLACED 262-1971,293-7538

3406E Marine B Tier 307-9879 38 JAN07
550 @ 2100 RPM
REPLACED 262-1972,293-7537

3406E Marine B Tier 307-9880 39 JAN07
550 @ 1800 RPM
REPLACED 262-1973,293-7536

3406E Marine A Tier 307-9881 40 JAN07
450 @ 1800 RPM
REPLACED 262-1974,293-7535

C15 Marine E Tier 307-9965 44 JAN07
800 HP @ 2300 RPM
REPLACED 297-6818

C15 Marine E Tier 307-9964 43 JAN07
850 HP @ 2300 RPM
REPLACED 270-5395,297-6816

C15 Marine E Tier 307-9963 52 JAN07
800 HP @ 2300 RPM
REPLACED 284-8387,297-6814

C15 B IRONSET AFT 447-1555 N/A SEP13
0HP@0RPM
Replaces 387-4548,426-1826,441-8394

C15 A IRONSET AFT 450-5765 N/A SEP13
0HP@0RPM
Replaced 387-4546,394-4389,419-7844,442-5631,447-5638
C15 Marine E Tier 307-9962 51 JAN07
850 HP @ 2300 RPM
REPLACED 284-8388,297-6809

C18 Marine 271-8701 20 SEP05
460 HP @ 1800 RPM
Replaced 244-3524

C18 MAR-470HP PROP 432-5961 196 APR13
470HP@1800RPM
Replaced 383-3506

C18 MAR-670.5 HP PROP 432-5965 193 APR13
670HP@1800RPM
Replaced 383-3510

C18 Marine 271-8708 5 SEP05
875 HP @ 2200 RPM
Replaced 234-4964

C18 Marine 250-0577 2 OCT05
1000 HP @ 2300 RPM
Replaced 234-4965

C-18 Marine 337-9873 126 Feb09
1015 HP @ 2300RPM
Replaced N/A

C18 Marine 312-3381 45 JUL08
1000/1150 HP @ 2300 RPM
Replaced N/A

C18 Marine D Prim ECM 310-7690 38 MAR07
822 HP @ 2200 RPM
Replaced 254-6000,261-7253,273-2201

C18 Marine D BKUP ECM 310-7691 42 MAR07
822 HP @ 2200 RPM
Replaced 254-6000,261-7254,273-2202

C18 Marine B Prim ECM 310-7692 37 MAR07
617 HP @ 1800 RPM
Replaced 254-5998,264-0190,273-2203

C18 Marine B BKUP ECM 310-7693 43 MAR07
617 HP @ 1800 RPM
Replaced 254-5998,264-0191,273-2204

C18 Marine Prim Tier II 313-7563 104 JUN07
618 HP @ 1800 RPM
Replaced N/A

C18 Marine BKUP Tier II 313-7564 105 JUN07
618 HP @ 1800 RPM
Replaced N/A

C18 MEUI Marine 271-8707 14 SEP05
725 HP @ 2100 RPM
Replaced 244-3512

C18 MEUI Marine 271-8706 15 SEP05
485 HP @ 1800 RPM
Replaced 244-3514

C18 MEUI Marine 271-8705 16 SEP05
560 HP @ 2100 RPM
Replaced 244-3516

C18 MEUI Marine 271-8704 17 SEP05
608 HP @ 1800 RPM
Replaced 244-3518

C18 MEUI Marine 271-8703 18 SEP05
680 HP @ 2100 RPM
Replaced 244-3520

C18 MEUI Marine 271-8702 19 SEP05
595 HP @ 1800 RPM
Replaced 244-3522

C18 Marine D-Tier Primary 310-7688 51 MAR07
822 HP @ 2200 RPM
Replaced 284-8573

C18 Marine D-Tier Back up 310-7689 52 MAR07
822 HP @ 2200 RPM
Replaced 284-8574

C18 Marine D-Tier 284-8389 49 OCT05
875 HP @ 2200 RPM
Replaced N/A

C18 Marine E-Tier 284-8390 50 OCT05
1000 HP @ 2200 RPM
Replaced N/A

C18 Marine Aux. EPG 440-9720 21 JUL13
301bKW 50HZ 404HP@1800RPM
Replaced 244-3483,272-0672,278-5568,308-7226

C18 Marine Aux. EPG 440-9728 21 JUL13
301bKW 50HZ 404HP@1800RPM
Replaced 262-8532,272-0680,278-5576,308-7234

C18 Marine Aux. EPG 440-9721 22 JUL13
383bKW 50 HZ 514HP@1500RPM
Replaced 244-3485,272-0673,278-5569,308-7227

C18 Marine Aux. EPG 440-9729 22 JUL13
383bKW 50 HZ 514HP@1500RPM
Replaced 262-8534,272-0681,278-5577,308-7235

C18 Marine Aux. EPG XQ400 440-9722 23 JUL13
438bKW 50 HZ 587 HP@1500RPM
Replaced 244-3487,272-0674,278-5570,308-7228

C18 Marine Aux. EPG XQ400 440-9730 23 JUL13
438bKW 50 HZ 587 HP@1500RPM
Replaced 262-8536,272-0682,278-5578,308-7236

C18 Marine Aux. EPG 440-9723 24 JUL13
492bKW 50HZ 660HP@1800RPM
Replaced 244-3489,272-0675,278-5571,308-7229

C18 Marine Aux. EPG 440-9731 24 JUL13
492bKW 50HZ 660HP@1800RPM
Replaced 262-8538,272-0683,278-5579,308-7237

C18 Marine Aux. EPG 440-9724 25 JUL13
372bKW 60 HZ 499HP@1800RPM
Replaced 244-3491,272-0676,278-5572,308-7230

C18 Marine Aux. EPG 440-9732 25 JUL13
372bKW 60 HZ 499HP@1800RPM
Replaced 262-8540,272-0684,278-5580,308-7238

C18 Marine Aux. EPG 440-9725 26 JUL13
465bKW 60HZ 624HP@1800RPM
Replaced 247-4656,272-0677,278-5573,308-7231

C18 Marine Aux. EPG 440-9733 26 JUL13
465bKW 60HZ 624HP@1800RPM
Replaced 262-8542,272-0685,278-5581,308-7239

C18 MAR-AUX 326-9069 119 Feb09
500EKW 60HZ SECONDARY 670HP@1800 RPM
Replaced N/A

C18 Marine Aux. EPG 440-9726 27 JUL13
547bKW 60HZ 733HP@1800RPM
Replaced 244-3495,272-0678,278-5574,308-7232

C18 Marine Aux. EPG 440-9734 27 JUL13
547bKW 60HZ 733HP@1800RPM
Replaced 262-8544,272-0686,278-5582,308-7240

C18 Marine Aux. EPG 440-9727 28 JUL13
601bKW 60 HZ 806HP@1800RPM
Replaced 244-3497,272-0679,278-5575,308-7233

C18 Marine Aux. EPG 433-9245 28 JUL13
601bKW 60 HZ 806HP@1800RPM
Replaced 262-8546,272-0687,278-5583,308-7241

C18 EPG 2806C-E18 267-4622 33 DEC04
640bKW @ 1500 RPM
Replaced 250-1390,255-6265

***************************************************************************

================================================================================
228 1850 3408E/3412E/C18/C27/C32,3500 Machine & Commercial Engine FLASH File Cross Reference

Upated February 03, 2009 dba

SEE SPECIAL INSTRUCTIONS REHS1385 FOR DETAILS ON INJECTOR INFORMATION

**************************************************************************
ENGINE RATING/ FLASH SERVICE RELEASE
APPLICATION INFORMATION FILE MODULE IC DATE
**************************************************************************
MACHINE
**************************************************************************
AD40/AE40 3408E 236-5572 ——– 18 MAR03
365 HP/2000
REPLACED 191-6548,207-4672,222-9256

AD40/AE40 3408E 239-4149 ——– 76 APR03
365 HP/2000
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3385 SEE REHS1385

AD45/AE45 3408E 236-5571 ——– 48 MAY03
380 HP/2000
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 195-3837,207-4609,222-9255 SEE REHS1385

AD40/AE40 3408E 275-5870 ——– 75 JUN05
510 HP/2000
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3383,239-4148 SEE REHS1385

Trucks sold in France only
769D/3408E (5TR1 – 1054) 237-0733 ——– 64 APR03
771D/3408E (6JR1 – 309)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3377 SEE REHS1385

Trucks sold in France only
773D/3412E (7ER1 – UP) 236-5596 ——– 12 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5370 (IC 20), 222-9258 (IC 12) SEE REHS1385

Trucks sold in France only
773D/3412E (7ER1 – UP) 239-1414 ——– 115 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3389 SEE REHS1385

769C Retrofit/3408E 246-1555 ——– 92 MAY03
474 HP/2000 RPM
Replaced 221-2917

All trucks except sold in France
769D/3408E (5TR1 – UP) 236-5581 ——– 3 APR03
(5SS1 – UP)
771D/3408E (6JR1 – UP) FOR USE WITH FORMER STYLE INJECTORS (174-7526)
(6YS1 – UP)
69D /3408E (9SS1 – UP) TIER II
REPLACED 188-7053,177-5368,222-9235 SEE REHS1385

All trucks except sold in France
769D/3408E (5TR1 – UP) 237-0732 ——– 63 APR03
(5SS1 – UP)
771D/3408E (6JR1 – UP)
(6YS1 – UP) TIER 1
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3375 SEE REHS1385

All trucks except sold in France
69D /3408E (9SS1 – UP) TIER 1 239-4155 ——– 65 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3379 SEE REHS1385

All trucks except sold in France
769D/3408E (5TR1 – UP) 238-1011 ——– 57 APR03
(5SS1 – UP)
771D/3408E (6JR1 – UP) FOR USE WITH NEW STYLE INJECTORS (198-4752)
(6YS1 – UP) TIER II
69D /3408E (9SS1 – UP)
REPLACED 211-8764 SEE REHS1385

769D/3408E UNDER GROUND MINING 169-3699 ——– 42 JUN99

773B/3412E 317-5254 ——– 145 JUL07
682HP/2000 RPM Retrofit (California Emissions Credit)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACES 212-6930,246-1554
SEE REHS1385

773D/3412E (7ER1 – UP) 310-1883 ——– 114 MAR07
(7CS1 – UP)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 177-5372(IC 12),214-3347,
239-1413 (SEE REHS1385)

773D/3412E (7ER1 – UP) 236-5595 ——– 12 APR03
(7CS1 – UP)
FOR USE WITH NEW STYLE INJECTORS (232-1175)
REPLACED 177-5372,222-9257
SEE REHS1385

773E/3412E Tier II 238-1014 ——– 61 APR03
710 HP/2000
REPLACED 197-4785, 211-876 5

73D /3412E (1GW1 – UP) 236-5598 ——– 22 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 207-0848, 222-9260 SEE REHS1385

73D /3412E (1GW1 – UP) 239-4163 ——– 116 MAY03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 207-0848, 214-3356
SEE REHS1385

775D/3412E (6KR1 – UP) 239-1415 ——– 121 APR03
(8AS1 – UP)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3349 SEE REHS1385

775E/3412E Tier II 314-2910 ——– 60 MAY07
760 HP/2000
REPLACED 208-3006,211-8766,
231-9077,235-8806

773F/C27 ACERT 330-6542 ——– 4 Apr09
714/730 HP/1800 RPM
697/719 HP/2000 RPM
REPLACED 251-3806,292-4603,297-4746,
301-5308

775F/C27 ACERT 330-6065 ——– 5 Apr09
777 HP/1800 RPM
777 HP/2000 RPM
REPLACED 251-3807,292-4604,295-6120,
301-5323

C27 MACH 775_Tier4f 541-0603 11 NOV13
813HP@1800RPM
Replaced

C27 OHT 773G TIER 4F PROD 7 450-9934 10 NOV13
763hp @ 1800rpm
Replaced

777D/3508B Tier I 306-4183 ——– 17 JAN07
920/1000 HP/1750RPM
REPLACED 243-0004,257-8915

777D/3508B Tier I GT47 306-4153 ——– 30 JAN07
920/1000 HP/1750RPM
REPLACED 281-2879

777D/3508B GT47 325-4681 ——– 33 JAN08
410/920 @ HP/1750RPM
REPLACED 291-3881

C27 IND CDE TIER ENGINE PSO 450-5743 SEP13
1050 2100 26
1150 2100 27
950 2100 28

C32 IND BCDE TIER ENGINE PSO 447-8055 JUL13

C32 MACH 777_Tier4f 451-0606 10 NOV13
1011HP@1800RPM
Replaces

777F/C32 ACERT 326-8166 ——– 3 MAY08
969/1016 HP@1750RPM
REPLACED 269-9085,291-8545,
295-4732,301-5708,319-1823

777F/C32 ACERT 344-8246 ——– 102 Apr09
970/1016 HP@1750RPM
REPLACED 330-0654

785C/3516B HAA 317-3355 ——– 11 JUL07
1380/1450 HP@1750RPM
REPLACED 243-0006

785C/3512B HD Tier I 306-4193 ——– 12 JAN07
1380/1450 HP@1750RPM
REPLACED 237-6372,277-7209

785F/3512C Tier II 335-6779 ——– 19 JUL08
1380/1450 HP@1750RPM
REPLACED 311-8506

789C/3516B Tier I 325-0578 ——– 19 JAN08
1800/1900 HP@1750RPM
REPLACED 243-0009,257-5918,306-4394

789C/3516B HAA 329-2606 ——– 28 JUN08
1800/1900 HP@1750RPM
REPLACED 246-9317,252-4860,317-6516

793D/3516B 332-1113 ——– 7 AUG08
2160/2270/2415 HP/1750RPM
REPLACED 253-1546,265-4389,
300-4965,302-1235,329-0100

992K/854K C32 TIER4 FINAL 390-5015 ——– 5 NOV11
921 HP/1750RPM
REPLACED 347-7072,377-1608,380-8673
388-5366

992K/854K/C32 ACERT 359-9483 ——– 36 OCT11
943 HP/1750RPM
REPLACED 282-8750,315-6209,334-3711
345-7711

992K/C32 ACERT 345-7710 ——– 2 May09
1050 HP/1900RPM
REPLACED 246-1559,277-5564,295-6058,
334-3263

69D /3408E ELPHINSTONE 236-5580 ——— 65 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
SEE REHS1385
REPLACED 151-7061,206-7741,222-9241

631G/637G/3408E 236-5570 ——– 47 MAY03
517HP/2000 FOR USE WITH FORMER STYLE INJECTORS (174-7526)
SEE REHS1385
REPLACED 189-1041,198-1116,222-9237

631G/637G/3408E 238-1010 ——– 62 APR03
517HP/2000 AWK1-272, AXT1-316
FOR USE WITH NEW STYLE INJECTORS (198-4752)
SEE REHS1385
REPLACED 198-1116,214-3343

631E/3408E (1AB1640 – UP) 236-5577 ——– 6 MAY03
(1NB1390 – UP).
633E/3408E (2PS0290 – UP)
637E/3408E (1FB0660 – UP)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
SEE REHS1385
REPLACED 177-5376,222-9244

631E/3408E (1AB1640 – UP) 239-4152 ——– 68 APR03
(1NB1390 – UP)
633E/3408E (2PS0290 – UP)
637E/3408E (1FB0660 – UP) FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3362 SEE REHS1385

631G/637G 3408E (CLR1-UP,CEH1-UP) 230-1557 ——– 93 NOV02
USED WHEN SCRAPER ENGINE IS ELECTRONIC C9

65xB/3408E Scraper Retrofit 221-2921 ——– 83 May03
550HP/1900 rpm Retrofit (California Emissions Credit)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACES N/A SEE REHS1385
************************************************************************
RETROFIT
************************************************************************
D8L/3408E NP Retrofit 270-4369 ——– 96 FEB05
358HP/1900 RPM
Replaced 230-9771

D9N/3408E TTT Retrofit 286-7263 ——– 85 NOV05
401HP/1900 RPM
Replaced 212-6924

D10N/3412E NP Retrofit 273-5839 ——– 150 APR05
557HP/1900 RPM
Replaced 230-9777

D10N TIER III/C27 Retrofit 365-5930 40 Oct10
597 HP @ 1800RPM
Replaced 317-1542

D10R TIER III/C27 Retrofit 365-5929 68 Oct10
646 HP @ 1800 RPM
Replaced 329-4334
f
620B WTS/C15 Tier 3 Retrofit 312-8795 ——— 92 MAY07
359/394 HP @ 1800
REPLACED N/A

C15 MACH-621G WTS 428-9447 143 DEC12
359HP @ 1800RPM, 394HP @ 1800RPM
Replaced 365-4213, 368-9107

834B/3408E Retrofit 215-7423 ——– 87 MAY03
487HP/2100 RPM
Replaced N/A

63XE/3408E WTS Retrofit 221-2907 ——– 89 MAY03
475HP/2000 RPM
Replaced N/A

988F/3408E WHL Retrofit 221-2911 ——– 90 APR03
429HP/2000 RPM
Replaced N/A

988F/3408E WHL Retrofit 263-3741 ——– 102 DEC04
458HP/2000 RPM
Replaced N/A

988B/3408E Retrofit 286-9811 ——– 91 DEC05
410HP/2100 RPM
Replaced 221-2913,230-9780

992C/3412E MACH Retrofit 296-2765 ——– 146 JUL06
725HP/2000 RPM
Replaced N/A

772B/3412E Retrofit 276-3446 ——– 152 MAY05
689HP/2000 RPM
Replaced 220-4572

777B/3508B Retrofit 294-8717 ——– 36 AUG06
920HP/1750 RPM
Replaced N/A

777C/3508B Retrofit 294-4943 ——– 35 AUG06
920HP/1750 RPM
Replaced N/A

777G/C32 LRC Tier4f 381-8109 ——– 9 Mar12
1022HP/1800 RPM
Replaced N/A

793B/3516B MACH-HD Retrofit 303-1920 ——– 31 OCT06
2160HP/1750 RPM
Replaced N/A

************************************************************************
650E/3408E WTS Scraper VHP 239-4154 ——– 70 MAY03
457/1900 rpm
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3365 SEE REHS1385

657E/3408E Non-Dual HP Scraper 236-5578 ——– 11 MAY03
(7KR202-250)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 164-4632, 222-9245 SEE REHS1385

657E/3408E Non-Dual HP Scraper 239-4153 ——– 69 APR03
(7KR202-250) FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 164-4632, 214-3363 SEE REHS1385

657E/3408E Dual HP Scraper 236-5579 ——– 23 MAY03
(7KR251 – UP),(6PR104 – UP)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5386,222-9246 SEE REHS1385

657E/3408E Dual HP Scraper
(7KR251 – UP) 239-4154 ——– 70 APR03
(6PR104 – UP) FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 177-5386, 214-3365 SEE REHS1385

65xE/3412E Scraper Retrofit 212-6928 ——– 147 MAY03
577HP/1900 RPM Retrofit (California Emissions Credit)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACES N/A SEE REHS1385

650E/3412E WTS Tractor VHP 239-4161 ——– 120 MAY03
576hp/1900 rpm
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3354 SEE REHS1385

657E/3412E Dual HP Tractor 236-5594 ——– 21 MAY03
(5YR258 – UP), (6TR208 – UP)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5388, 222-9269 SEE REHS1385

657E/3412E Dual HP Tractor
(5YR258 – UP) 239-4161 ——– 120 APR03
(6TR208 – UP)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 177-5388, 214-3354 SEE REHS1385

651E/3412E (4YR188 – UP) 239-4160 ——– 119 APR03
657E/3412E (5YR212-257)
657E/3412E (6TR199-207) Non-Dual HP Tractor.
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 164-3805, 214-3352 SEE REHS1385

651E/3412E (4YR188 – UP) 236-5593 ——– 7 MAY03
657E/3412E (5YR212-257)
657E/3412E (6TR199-207) Non-Dual HP Tractor.
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 164-3805, 222-9268 SEE REHS1385

834B/836/3408E (7BR1 – UP) 236-5583 ——– 12 MAY03
(7FR001-263 w/o PS8971 update)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5378, 222-9250 SEE REHS1385

834B/836/3408E (7BR1 – UP) 237-0737 ——– 59 APR03
(7FR001-263) FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3369 SEE REHS1385

836 /3408E (7FR00264 – UP) 236-5585 ——– 21 MAY03
(7FR1-263 w/ PS8971 update)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5380,222-9252 SEE REHS1385

836/3408E 525HP 2100HP 237-0739 ——- 61 APR03
(7FR264-478)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3373 SEE REHS1385

834B/3408E sold in Spain only 236-5584 ——– 24 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5382, 222-9251 SEE REHS1385

834B/3408E sold in Spain only 237-0738 ——– 60 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3371 SEE REHS1385

C18 988K T4F LRC 445-1983 1 SEP13
535HP@1700RPM
Replaces 380-6205

C18 MACH-988K TIER4F 449-7724 3 JUL13
530HP@1700RPM
Replaces 376-7073,393-5766,442-4761,446-0317

C18 MACH – 834K LRC 445-1991 3 SEP13
571HP@1700RPM
Replaces 380-6224

C18 MACH-24M MG 441-7516 212 Jun13
542HP@1800RPM
544HP@1700RPM
Replaces 433-6929

C18 MACH-834K CMP 449-7725 4 JUL13
362HP@2120RPM
Replaced 376-8076,393-5767,442-4769

C18 MACH-24M MG 433-6931 211 APR13
542HP@1800RPM
544HP@1700RPM

C18 MACH 24M MG 437-7379 145 APR13
542HP@1800RPM
Replaces 360-1781,219-7185,309-9653
326-9557,366-6155,392-6571,422-3782

C18 MACH 24M MG 437-7387 176 APR13
542HP@1800RPM
Replaces 373-9815,394-1151,422-3820

AD45B ADT C18 MACH ACERT TT 272-5530 ——— 19 APR05
589 HP @ 2000
REPLACED 269-8296

C18 MACH-D9T TTT NACD LRC 445-0534 3 SEP13
464HP@1800RPM
Replaced 364-2782, 372-3326,381-2711,387-8444

C18 MACH-D9T TTT 439-7193 144 AUG13
464HP@1800RPM
Replaces 361-8115

C18 MACH-D9T TTT 451-0601 8 OCT13
463HP@1800RPM
Replaced 381-9641,438-9610,444-9758

C18 MACH-AD45 UNDERGROUND AT 422-7469 19 MAY13
589HP@2000RPM
Replaces 250-2818,269-8296,272-5530
323-2034,360-9937

AD55X/C18 MACH ACERT TT 375-3398 ——— 44 Jun13
650 HP @ 2000
REPLACED 229-2777,246-8295,256-6773,266-3536,
283-3431,324-6836

772/C18 MACH ACERT Tier 3 317-6046 ——— 7 AUG07
557/598 HP @ 1800
REPLACED 219-7187,230-9782,
282-9921,295-4647

C18 MACH-772 OHT 445-7797 9 OCT13
571HP@1900RPM
Replaced 379-2106,441-9490,445-7797

C18 MACH-D9T TTT NACD STD LRC 445-0535 5 JUL13
464HP@1800RPM
Replaces 371-2802,381-2710,387-8446

24M/C18 MACH MG ACERT 326-9557 ——— 18 FEB08
542 HP @ 1800
REPLACED 219-7185,309-9653

385C/C18 MACH ACERT Tier 3 313-7642 ——— 27 MAY07
700 HP @ 1820
REPLACED 263-2086

385C/C18 MACH Ti ACERT 337-6857 ——— 31 Mar09
553 HP @ 1800
REPLACED 263-3701,306-6864,
326-1108

385C/C18 MACH Ti LRC ACERT 326-1107 ——— 32 FEB08
552 HP @ 1800
REPLACED 268-3702,306-6851

834/836H/C18 MACH ACERT 313-4135 ——— 1 MAY07
554 HP @ 1800
REPLACED 268-5715,291-4790,303-9541

834/836H/C18 MACH ACERT 265-3288 ——— 29 JAN05
554 HP @ 1800
REPLACED NA

C18 MACH – 836 CMP 447-3920 5 SEP13
523HP@1800RPM
554HP@1800RPM
Replaces 378-3258,442-4763

C18 MACH-988H LWL 434-9506 183 AUG13
523HP@1800RPM, 555HP@1800RPM
Replaces 370-6161

C32 MACH-992K/854K LWL 434-9497 36 AUG13
943HP@1750RPM
Replaces 282-8750,315-6209,334-3711
345-7711, 359-9483

C32 MACH – 993K LWL 434-9498 2 AUG13
1050HP@1900RPM
Replaces 246-1559,277-5564,315-4189,295-6058
334-3263,345-7710,359-9484

C27 MACH-990H LWL 434-9496 1 AUG13
686HP@2000RPM
Replaced 226-4736,250-8294,261-1558
284-2349,288-5926,337-0921,359-9482

MT865/C18 MACH ACERT 280-3527 ——— 25 MAY07
525 HP @ 2100
REPLACED 275-2167,276-2680

MT865/C18 MACH ACERT 305-3318 ——— 83 DEC06
525 HP @ 2100
REPLACED N/A

630G WTS/C18 MACH ACERT 439-7194 ——— 13 AUG13
488 HP @ 1800
REPLACED 227-1401,261-1588,317-3218
327-1003,339-0927,397-5326

637E WTS/C18 MACH ACERT 318-2878 ——— 67 AUG07
488 HP @ 1800
REPLACED 303-8132

657G WTS/C18 MACH ACERT 434-9490 ——— 61 AUG13
596/632 HP @ 1800
REPLACED 295-6949,317-3217,327-2227
397-5327

988F/3408E (2ZR00001-00699) 236-5586 ——– 1 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5361,222-9247 SEE REHS1385

988F/3408E (2ZR00001-00699) 237-0734 ——– 78 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 211-1655 SEE REHS1385

988F/3408E (2ZR00700-01631) 236-5587 ——– 20 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 173-5597,222-9248 SEE REHS1385

988F/3408E (2ZR00700-01631) 237-0735 ——– 79 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 212-5087 SEE REHS1385

988FII/3408E (2ZR01632 – UP) 236-5588 ——– 45 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 169-6300,222-9249 SEE REHS1385

988FII/3408E (2ZR01632 – UP) 237-0736 ——– 58 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3367 SEE REHS1385

988FII/3408E UNDER GROUND MINING 177-5363 ——– 25 SEP99
Replaced N/A

980H/C15 MACH MWL EPA/MLIT 332-1441 ——– 104 MAY08
332/362/363/393@1800RPM
Replaced 320-6138,330-4553

988H/C18 MACH ACERT 332-9423 ——— 3 JUN08
555 HP @ 1800
REPLACED 266-6517,289-8580,
301-7010,313-3626

990/844/3412E (4FR1 – UP) 236-5599 ——– 2 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5364,222-9266 SEE REHS1385

990/844/3412E (4FR1 – UP) 239-4164 ——– 113 MAY03
675HP/2000 rpm
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 177-5364, 214-3345 SEE REHS1385

990 Tier II 680 HP 2000 RPM 238-1015 ——– 73 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 197-6431,221-4505,228-7127 SEE REHS1385

990 3412E Retrofit 215-7425 ——– 146 MAY03
660 HP 2000 RPM

990/844 Tier II 3412E Retrofit 226-8793 ——– 154 JAN05
675 HP 2000 RPM

992G MACH 3508B GT47 272-8014 ——– 29 MAR05
880 HP 1750 RPM

D9L/3412E TTT 215-7419 ——– 143 MAY03
492HP/1900 RPM Retrofit (California Emissions Credit)
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACES N/A

D9R/3408E (8BL830-1380) 133-1440 6 DEC95
CLUTCH BRAKE
Replaced 173-5599

D9R/3408E CLUTCH BRAKE. 236-5573 ——– 44 MAY03
(8BL1381-UP)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 169-6303,222-9242 SEE REHS1385

D9R/3408E (8BL1381- UP) 239-4150 ——– 66 APR03
CLUTCH BRAKE
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 169-6303,214-3358 SEE REHS1385

D9R/3408E (7TL557-1037) 173-5601 173-5602 6 JUL99
DIFFERENTIAL STEER

D9R/3408E (7TL1038 – UP) 236-5574 ——– 44 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 169-6305,222-9243 SEE REHS1385

D9R/3408E (7TL1038 – UP) 239-4151 ——– 67 APR03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 169-6305,214-3360 SEE REHS1385

D9R/3408E Phase III 236-5569 ——– 44 MAY03
475 HP @ 1800 ABK1-708, ACL1-853
FOR USE WITH FORMER STYLE INJECTORS (174-7526) SEE REHS1385
REPLACED 199-4437,196-5013,186-4920,
209-2017,211-4991,222-9236

D9R/3408E Phase III 238-1009 ——– 56 APR03
475 HP @ 1800
FOR USE WITH NEW STYLE INJECTORS (198-4752)
211-4991,214-3341 SEE REHS1385

D9T/C18 MACHINE SS ACERT NACD 434-9504 ——– 5 AUG13
464 HP @ 1800
REPLACED 243-3420,260-5882,267-8346,
278-1864,299-1769,311-6857,325-3642
390-5243

D9T/C18 MACHINE SS ACERT EU 439-7191 ——– 15 AUG13
464 HP @ 1800
REPLACED 244-8690,260-5883,267-8347
278-1211,299-1768,311-6858,325-4459
390-5244

C18 MACH-D9T TTT NACD 439-7192 184 AUG13
464HP@1800RPM
Replaces 374-2612

PM200/C18 COLD PLANER ACERT 293-4851 ——– 17 APR06
575 HP @ 1900
REPLACED 273-3889

PM200/C18 COLD PLANER ACERT 325-3635 ——– 66 JAN08
575 HP @ 1900
REPLACED 300-7641,305-5543

PM201/C18 COLD PLANER ACERT 328-1652 ——– 69 APR08
575 HP @ 1900
REPLACED 266-3709,261-1597,
247-2777,280-1580

C18 MACH-390F HEX 449-8569 2 OCT13
543HP@1900RPM
Replaces 379-5058,420-3495
433-9292

PM565B/3408E (8GS131-153) 173-5603 19 AUG99
REPLACED 152-7173,173-5604

PM565B (8GS1- 226) 236-5575 ——– 46 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7528)
REPLACED 169-6307,222-9253 SEE REHS1385

PM565B (8GS1- 226) 237-2056 ——– 74 MAY03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 225-4335 SEE REHS1385

PM565B (8GS227-up) 237-2057 ——– 82 MAY03
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 214-3381 SEE REHS1385

PM565 /3408E (3TK113-115,117-UP) 236-5576 ——– 13 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 150-3437,222-9254 SEE REHS1385

PM565 /3408E (3TK113-123) 239-5973 ——– 77 MAY03
FOR USE WITH NEW STYLE INJECTORS
REPLACED 218-1944 SEE REHS1385
**************************************************************************
24H/3412E (7KK1 – UP) 236-5591 ——– 6 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 177-5384,222-9267 SEE REHS1385

24H/3412E (7KK1 – UP) 270-0354 ——– 118 FEB05
540HP/2000 rpm
FOR USE WITH NEW STYLE INJECTORS (198-4752)
SEE REHS1385
REPLACED 177-5384,214-3351,239-4158,244-7591

5110/3412E 236-5592 ——– 38 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 151-7095,222-9265 SEE REHS1385

5110B/3412E 757 HP 1800 RPM 239-4159 ——– 107 MAY03
757HP/1800 RPM
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 208-2923 SEE REHS1385

AD55B/C27 MACH ACERT 295-4694 ——— 39 MAY06
805 HP @ 2000
REPLACED N/A

D10R/3412E 161-4176 30 JAN99
(3KR1-558,560,567,727)

D10R/3412E 236-5589 ——– 31 MAY03
(3KR562-566,568-726,728-UP)
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 151-7073,161-0567,201-7440,
222-9261 SEE REHS1385

D10R/3412E EEC SOUND 236-5590 ——– 32 MAY03
FOR USE WITH FORMER STYLE INJECTORS (174-7526)
REPLACED 201-9913,222-9262 SEE REHS1385
D10R FOR EUROPE ONLY WITH EEC SOUND ATTACHMENT GROUP 153-1227

D10R/3412E 236-5590 25 MAY03
(3KR996-1115,1117,1118,
1125-UP)
REPLACED 161-0571,161-0572,201-9913

D10R/3412E Phase III Test 209-2020 ——– 51 MAY01
661 HP @ 1800
REPLACED 190-4188

D10R/3412E Phase III NACD 253-8993 ——— 111 NOV04
661 HP @ 1800
FOR USE WITH NEW STYLE INJECTORS (198-4752)
SEE REHS1385
REPLACED 214-3387,221-9335,
238-1012,246-5945,247-4586

D10R/3412E Phase III EU 253-8994 ——— 112 NOV04
661 HP @ 1800
SOUND SUPPRESSION NEW STYLE INJECTORS (198-4752)
SEE REHS1385
REPLACED 214-3392,221-9336,
238-1013,246-5946,247-4588

D10R/3412E IM SI 243-5439 ——— 103 AUG03
613 HP @ 1900
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 208-5805,213-6416,222-9263, 239-4156 SEE REHS1385

D10R/3412E EEC IM SI 243-5440 ——– 104 AUG03
613 HP @ 1900
FOR USE WITH NEW STYLE INJECTORS (198-4752)
REPLACED 208-5808,213-6418,222-9264, 239-4157 SEE REHS1385

D10T/C27 NACD ACERT RATAAC 434-9517 ——— 3 AUG13
646 HP @ 1800
REPLACED 223-3266,229-2682,269-8815,282-0786, 354-4954, 374-4609,426-1841

D10T/C27 EU ACERT RATAAC 434-9518 ——— 6 AUG13
646 HP @ 1800
REPLACED 229-2768,282-0787, 354-4955, 374-4608
426-1840

C27 MACH-D10T TTT EU ACERT 434-9516 ——— 34 AUG13
646 HP @ 1800
REPLACED 278-0173,298-8564,313-4535, 344-8245, 359-5139, 374-4607
425-0572

D10T/C27 NACD ACERT 434-9501 ——— 32 AUG13
646 HP @ 1800
REPLACED 276-5460,278-0770,298-8561,
313-4534, 344-8244, 359-5138, 374-4606,425-0571

D10T/C27 378-3285 1 SEP11
752 HP @ 1800
REPLACED N/A

D11T/C32 NACD ACERT 434-9508 ——— 30 AUG13
922 HP @ 1800
REPLACED 231-0302,295-9910,307-0540,
312-4341,326-8128, 344-1769, 373-9182,425-0604

C32 MACH-D11T LRC TTT 424-4397 3 DEC12
923HP @ 1800RPM
Replaced 357-5314, 380-3664, 386-1517, 398-4824

C32 MACH-D11T2 TTT 424-4396 12 DEC12
927HP @ 1800RPM
Replaced 354-1241, 376-8070, 379-3838, 385-7867, 396-8387

C32 MACH-D11T2 TTT 436-3872 Parts Service Only APR13

D11RB/3508B MACH GT47 265-4288 ——— 31 AUG05
936 HP @ 2000
REPLACED N/A

990H/C27 MACH ACERT 337-0921 ——— 1 May09
686 HP @ 2000
REPLACED 250-8294,261-1558,284-2349,
288-5926
**************************************************************************

3408E & 3412E INDUSTRIAL FLASH SERVICE RELEASE
ENGINE RATING INFORMATION FILE MODULE IC DATE
**************************************************************************

3408E JWAC HIGH POWER 154-4634 154-4635 14 NOV97

3408E JWAC HIGH POWER 203-3207 ——– 14 JAN01
525/550/575 HP @ 2100
REPLACED 160-9959

3408E JWAC HIGH POWER 225-9211 ——– 15 JUN02
400/425/450/475/500/525 HP @ 1800 with 172-0802 ECM
REPLACED 160-9958,211-0761,221-9304

3408E JWAC HIGH POWER 225-9215 ——– 15 JUN02
400/425/450/475/500/525 HP @ 1800 with 156-7172 ECM
REPLACED 160-9958,211-0761,221-9320

3408E JWAC HIGH POWER 225-9208 ——– 52 JUN02
525/550/575 HP @ 2100 with 172-0802 ECM
REPLACED 160-9959,203-3207,207-5402,221-9301

3408E JWAC HIGH POWER 225-9212 ——– 52 JUN02
525/550/575 HP @ 2100 with 156-7172 ECM
REPLACED 160-9959,203-3207,207-5402,221-9317

3408E JWAC HIGH POWER 225-9209 ——– 53 JUN02
625/650/675 HP @ 2100 with 172-0802 ECM
REPLACED 203-3208,207-5414,211-0759,221-9302

3408E JWAC HIGH POWER 225-9213 ——– 53 JUN02
625/650/675 HP @ 2100 with 156-7172 ECM
REPLACED 203-3208,207-5414,211-0759,221-9318

3408E JWAC HIGH POWER 225-9210 ——– 54 JUN02
600/625/650/675/700/725/750 HP @ 2100 with 172-0802 ECM
REPLACED 160-9960,203-3210,208-0829,211-0760,221-9303

3408E JWAC HIGH POWER 225-9214 ——– 54 JUN02
600/625/650/675/700/725/750 HP @ 2100 with 156-7172 ECM
REPLACED 160-9960,203-3210,208-0829,211-0760,221-9319

3412E JWAC DITA LOW POWER 213-4886 ——– 131 MAR02
475 HP @ 1200/645 HP @ 1500

3412E JWAC 221-9289 ——– 93 JUN02
650 HP @ 1800 for use with 172-0802 ECM
REPLACED 160-9961,203-3205,208-1046,211-0764

3412E JWAC 241-1770 ——– 93 JUN03
650 HP @ 1800
for use with 156-7172 ECM
REPLACED 160-9961,203-3205,
208-1046,211-0764, 221-9307

3412E JWAC 221-9290 ——– 94 JUN02
650/680/700/730/750 HP @ 2000
for use with 172-0802 ECM
REPLACED 160-9961,203-3206,
208-1047,211-0765

3412E JWAC 221-9308 ——– 94 JUN02
650/680/700/730/750 HP @ 2000
for use with 156-7172 ECM
REPLACED 160-9961,203-3206,
208-1047,211-0765

3412E JWAC LOW POWER 221-9295 ——– 109 JUN02
760 HP @ 2100
for use with 172-0802 ECM
REPLACED 188-8709,211-0770,208-9585

3412E JWAC LOW POWER 241-1773 ——– 109 AUG03
760 HP @ 2100
for use with 156-7172 ECM
REPLACED 188-8709,211-0770,208-9585, 221-9312

3412E JWAC LOW POWER 221-9296 ——– 110 JUN02
800 HP @ 2100
for use with 172-0802 ECM
REPLACED 188-8709,211-0770,200-1768

3412E JWAC LOW POWER 241-1774 ——– 110 AUG03
800 HP @ 2100 for use with 156-7172 ECM
REPLACED 188-8709,211-0770,200-1768, 221-9313

3412E JWAC LOW POWER 221-9294 ——– 108 JUN02
820/860 HP @ 2100 for use with 172-0802 ECM
REPLACED 188-8709,211-0770,214-3461

3412E JWAC LOW POWER 241-1772 ——– 108 AUG03
820/860 HP @ 2100 for use with 156-7172 ECM
REPLACED 188-8709,211-0770,214-3461, 231-9311

3412E JWAC HIGH POWER 221-9314 ——– 54 JUN02
900/950/1000/1050 HP @ 2100 for use with Non-Prime injectors
REPLACED 188-8710,211-0772

3412E JWAC HIGH POWER 221-9298 ——– 54 MAY02
900/950/1000/1050 HP @ 2100 for use with Prime Injectors
REPLACED 188-8710,211-0772

3412E JWAC 203-3203 ——– 28 JAN01
425/500/575 @ 1800
REPLACED 160-9965

3412E JWAC 203-3204 ——– 28 JAN01
625 @ 1800
REPLACED 160-9965

3412E JWAC 221-9287 ——– 95 JUN02
425/500/575 HP @ 1200 for use with 172-0802 ECM
REPLACED 160-9965,203-3203,208-1044,211-0762

3412E JWAC 221-9305 ——– 95 MAY02
425/500/575 HP @ 1200 for use with 156-7172 ECM
REPLACED 160-9965,203-3203,208-1044,211-0762

3412E JWAC 240-0299 ——– 141 JUN03
451/485/522/548 HP @ 1800
522/559 HP @ 2000
559 HP @ 1800
522/559 HP @ 2100
REPLACED 221-9334

3412E DITA JWAC LSP PETRO/IND 297-4821 ——– 139 JUL06
425 HP @ 1200
500 HP @ 1200
575 HP @ 1300
REPLACED N/A

3412E JWAC 221-9288 ——– 96 JUN02
625 HP @ 1400 for use with 172-0802 ECM
REPLACED 211-0763,208-1045,203-3204,214-3393

3412E JWAC 221-9306 ——– 96 MAY02
625 HP @ 1400 for use with 156-7172 ECM
REPLACED 211-0763,208-1045,203-3204,214-3393

3412E JWAC DITTA LOW POWER 241-1771 ——– 16 JUN03
600/650/700/735/750 HP @ 1800
for use with 156-7172 ECM
REPLACED 160-9963,208-1043,210-2017, 221-9309

3412E JWAC DITA HIGH POWER 161-4030 161-4031 10 APR98
700 HP @ 2100/2101 @ 1400
750 HP @ 2100/2250 @ 1400

3412E JWAC DITTA LOW POWER 154-4642 154-4643 16 NOV97

3412E JWAC DITA HIGH POWER 237-0318 ——– 102 MAR03
800 HP @ 2100
for use with 156-7172 ECM & NEW STYLE INJECTORS
REPLACED 205-8722,226-5085

3412E JWAC DITA HIGH POWER 237-0319 ——– 102 MAR03
800 HP @ 2100 for use with 172-0802 ECM
REPLACED 205-8722,226-5630

3412E JWAC DITTA HIGH POWER 221-9292 ——– 17 JUN02
800/850 HP 2100 HP for use with 172-0802 ECM
REPLACED 160-9964,154-4644,211-0768

3412E JWAC DITTA HIGH POWER 221-9310 ——– 17 JUN02
800/850 HP 2100 HP for use with 156-7172 ECM
REPLACED 160-9964,154-4644,211-0768

3408E ATAAC 159-5266 159-5267 16 FEB98
600 HP @ 2100/1437 @ 1400
625 HP @ 2100/1497 @ 1400

3412E JWAC DITTA LOW POWER 154-4646 154-4647 18 NOV97
Fe-Al Piston

3412E JWAC DITTA HIGH POWER 154-4648 154-4649 15 NOV97
Fe-Al Piston

3412E JWAC DITTA 221-9300 ——– 27 JUN02
LOW SPEED LOCOMOTIVE for use with 172-0802 ECM
641 HP @ 1500
644 HP @ 1400
REPLACED 149-7149,211-0773

3412E JWAC DITTA 221-9316 ——– 27 MAY02
LOW SPEED LOCOMOTIVE for use with 156-7172 ECM
641 HP @ 1500
644 HP @ 1400
REPLACED 211-0773

3412E Petro JWAC DITTA 149-9173 149-9174 28 MAY98
LOW SPEED LOCOMOTIVE
425/500 HP @ 1200
575 HP @ 1300
625 HP @ 1400

3412E Industrial 263-4047 ——– 134 OCT04
1050 HP @ 2100
HI POWER FE-AL PIST
REPLACED 221-9293,249-0075

3412E Industrial 263-4031 ——– 134 OCT04
1050 HP @ 2100
HI POWER FE-AL PIST NP
REPLACED 249-1227

3412E Industrial 263-4048 ——– 136 OCT04
860 HP @ 2100
LO POWER FE-AL PIST
REPLACED 221-9321,249-0076

3412E Industrial 263-4032 ——– 136 OCT04
860 HP @ 2100
LO POWER FE-AL PIST NP
REPLACED 249-1228

3412E Industrial 263-4049 ——– 137 OCT04
760 HP @ 2100
LO POWER FE-AL PIST
REPLACED 221-9322,249-0077

3412E Industrial 263-4033 ——– 137 OCT04
760 HP @ 2100
LO POWER FE-AL PIST NP
REPLACED 249-1229

3412E Industrial 263-4050 ——– 138 OCT04
800 HP @ 2100
LO POWER FE-AL PIST
REPLACED 221-9323,249-0078

3412E Industrial 263-4034 ——– 138 OCT04
800 HP @ 2100
LO POWER FE-AL PIST NP
REPLACED 249-1230

3412E Industrial 263-4051 ——– 139 OCT04
575 HP @ 1300
JWAC LSP PETRO/IND
REPLACED 221-9324,249-0079

3412E Industrial 263-4035 ——– 139 OCT04
575 HP @ 1300
JWAC LSP PETRO/IND
REPLACED 249-1231

3412E Industrial 263-4052 ——– 140 OCT04
625 HP @ 1400
JWAC LSP PETRO/IND
REPLACED 221-9325,249-0080

3412E Industrial 263-4036 ——– 140 OCT04
625 HP @ 1400
JWAC LSP PETRO/IND
REPLACED 249-1232

3412E Industrial 263-4053 ——– 141 OCT04
JWAC LOW POWER
750 HP @ 2100
REPLACED 221-9326,249-0081

3412E Industrial 263-4037 ——– 141 OCT04
JWAC LOW POWER
750 HP @ 2100
REPLACED 249-1233

3412E Industrial 263-4054 ——– 144 OCT04
800 HP @ 2100
JWAC HIGH POWER
REPLACED 221-9337,249-0082

3412E Industrial 263-4038 ——– 144 OCT04
800 HP @ 2100
JWAC HIGH POWER
REPLACED 249-1234

3512C Industrial 315-2659 ——– 13 MAR07
1501 HP @ 1800
REPLACED 291-3969,310-6026

3512C HD MARINE AUX 1800RPM 451-5847
2079HP@1800RPM 30 OCT13
2280HP@1800RPM 31
Replaced 348-9871, 322-8545

3512C HD MARINE AUX 1800RPM 451-5848 OCT13
2447HP@1800RPM 20
2682HP@1800RPM 21 Replaced 3035955*****************************************************************
Replaced 303-5955,317-5988,342-0501
391-9018

C18/C27/C32 INDUSTRIAL FLASH SERVICE RELEASE
ENGINE RATING INFORMATION FILE MODULE IC DATE
**************************************************************************
C18 Ind ACERT 280-3528 ——– 9 SEP05
MT875 Challenger
588 @ 2100 RPM
REPLACED 254-7442,275-2166,276-2679

C18 Ind ACERT 305-3320 ——– 84 DEC06
MT875 Challenger
588 @ 2100 RPM
REPLACED N/A

C18 Ind ACERT 330-9357 ——– NOV11
575 @ 1800 RPM 21
600 @ 1800 RPM 8
630 @ 1800 RPM 33
REPLACED 254-7440,267-3417,
271-7211,280-3502,284-0589
285-6552

C18 IND-ABC1 TIER 443-0011 SEP13
575HP@2000RPM 209
599HP@2000RPM 210
630HP@2000RPM 211
Replaces 392-4149,420-1864,432-1669,440-2370

C18 IND-TIER A, B, C 434-6957 205 DEC12
600HP@1900RPM 206
630HP@1900RPM 207
Replaced 375-8515,381-4871,384-9572,394-0320,419-6675

C18 IND- C2 Tier 437-1277 201 APR13
700HP@1900RPM
Replaced 374-5316,380-5956,384-9575,395-1117,419-6674

C18 IND-C3 Tier 435-2098 200 MAR13
755HP@1900RPM
Replaced 372-8631,380-8327,380-8365,384-9984
397-5092,419-6676

C18 IND ABC1 TIER PSO 449-2121 205 AUG13
600hp 1900rpm 206
630hp 1900 rpm 207

C18 F IRONSET AFT 450-5766 NA SEP13
0HP@0RPM
Replaces 387-4558,399-3913,419-7854
426-1831,448-0041

C18 B IRONSET AFTERTREATMENT 447-1536 N/A SEP13
0HP@0RPM
Replaces 387-4552,423-9431,426-1828
441-8395

C18 Ind 470 kW ACERT 312-1153 ——– 10 JAN08
630 @ 1800 RPM
REPLACED 254-7450

C18 Ind ACERT 290-0410 ——– 12 MAR06
700 @ 1800 RPM
REPLACED 267-3418,271-7212,280-3503

C18 Ind 522 KW Acert 351-7365 ——– 90 July09
Terex O&K Shovel
700 @ 1800 RPM
Replaced 350-1809

C18 IND TIER 4I ABC1 TIER ENGINE (PSO) 440-0788 205 MAY13
206
207
C18 Ind C2 Tier4i 435-2100 203 MAR13
700 @ 1900 RPM
Replaced 375-2380, 380-5961,387-3053,395-1118,420-4247,434-0864

C18 Ind ACERT 283-9378 ——– 14 NOV05
700 @ 2100 RPM
REPLACED N/A

C18 Ind 522 kW ACERT 329-6720 ——– 90 JUN08
700 @ 2100 RPM
REPLACED 283-7581,308-5693

C18 IND 522 KW 340-3646 ——– 89 Mar09
700 @ 1800RPM
Replaced: N/A

C18 Ind ACERT 302-2371 ——– 18 OCT06
440 @ 2100 RPM
REPLACED 254-7444,271-7213,
280-3499,285-3508

C18 Ind ACERT 302-2372 ——– 19 OCT06
440 @ 2100 RPM
REPLACED 271-7214,280-3500,285-3509

C18 Ind ACERT 302-1866 ——– OCT06
550 @ 1800 RPM 34
600 @ 1800 RPM 35
REPLACED 277-8083

C18 Ind ACERT 305-4485 ——– DEC06
765 @ 2100 RPM 22
800 @ 2100 RPM 23
REPLACED 254-7441

C18 Ind ACERT 306-4013 ——– DEC06
440 @ 2100 RPM 85
500 @ 2100 RPM 86
REPLACED N/A

C18 EP-60HZ-PETRO-HEP-RAIL 311-2724 ——– DEC07
550 @ 1500 RPM 34
600 @ 1500 RPM 35
REPLACED N/A

C18 PETRO-C/D TIER 437-3645 ——– 166 APR13
755HP@1800RPM 169
800HP@1800RPM
Replaces 367-3048,380-5958,3849574,397-5097,419-6678

C18 EP-60HZ-LOW-E 314-5421 ——– MAY07
861 @ 1800 RPM 6
923 @ 1800 RPM 7
REPLACED 265-8974

C18 EP-60HZ-LOW-BSFC 314-5422 ——– MAY07
861 @ 1800 RPM 8
923 @ 1800 RPM 9
REPLACED 265-8975

C18 EP-50HZ-LOW-E 314-5423 ——– MAY07
683 @ 1800 RPM 10
735 @ 1800 RPM 11
794 @ 1800 RPM 12
852 @ 1800 RPM 13
REPLACED 265-8976

C18 EP-50HZ-LOW-BSFC 314-5423 ——– MAY07
683 @ 1800 RPM 44
735 @ 1800 RPM 45
794 @ 1800 RPM 46
REPLACED 265-8976

C18 EP-60HZ-LOW-BSFC 324-0653 ——– DEC07
373 @ 1800 RPM 36
447 @ 1800 RPM 37
REPLACED 308-1470

C18 EP-50HZ-LOW-BSFC 324-0651 ——– DEC07
737 @ 1500 RPM 42
804 @ 1500 RPM 43
851 @ 1500 RPM 68
REPLACED 306-4144

C18 A IRONSET AFTERTREATMENT 449-9668 N/A SEP13
ohp orpm
Replaces 387-4550,394-4390,419-7853
442-5646,443-5386,445-9381

C27 IND-C,D,E Tier ACERT PSO 450-5743 SEP13
1050hp 2100rpm 26
1150hp 2100rpm 27
950hp 2100rpm 28
Replaced

C27 IND-PETRO 445-6700 MAY13
875HP@1800RPM 3
950HP@1800RPM 4
Replaces 392-9052,424-6008

C27 IND AB Tier PSO 439-3721 MAY13
800 hp @ 2100 77
875 hp @ 2100 78

C18 T4I IND C3 PROD 5.5 ENGINE
755 @ 1900 428-9771 200 NOV12

C27 Ind-A, B Tier ACERT 343-9945 ——– Mar09
750 @ 1800 RPM 29
830 @ 1800 RPM 30
REPLACED 264-9808,286-9941

C27 Ind-A,B Tier ACERT 367-9438 ——– Jan11
800 @ 2100 RPM 77
875 @ 2100 RPM 78
REPLACED N/A

C27 Ind-C,D,E Tier ACERT 344-9240 ——– Mar09
1050 @ 1800 RPM 28
1150 @ 1800 RPM 26
950 @ 1800 RPM 27
REPLACED 264-9810,286-9942,316-4388

C27 Ind-ABCD Tier4i 424-8963 APR13
800 @ 2100 RPM 43
875 @ 2100 RPM 73
950 @ 2100 RPM 74
1050 @ 2100 RPM 76
Replaced 351-9792,361-2906,369-1211,384-3417,396-3855
376-1346,377-6972,379-0983,380-3663

C27 RAIL LOCO EU PSO 450-2701 5 SEP13
947hp 1800rpm

C27 Ind- Locomotive EU IIIB PROD 6 439-2401 5 AUG12
947hp @ 1800 RPM
REPLACED 393-0889,422-2792,424-8956

C27 LOCOMOTIVE EU IIIB, T4I PROD 6 RAIL (PSO)
947hp @ 1800Rpm 437-0402 5 APR13

C27 IND-A/B Tier O&K SHOVEL RATING
765 @ 1800 RPM 361-1821 ——– 42 NOV11
REPLACED 350-2032

C27 PETRO-WELLFRAC DRY NARROW 424-8960 ——– 9 May13
800 @ 1800 RPM
REPLACED 351-8712,368-1424,369-7112
378-4085,380-3099,386-3933,393-2673

C27 PETRO WELL FRAC A-NARROW, T4F PROD 6 ENGINE (PSO)
800hp @ 1800rpm 437-3092 9 APR13

C27 PETRO BC NARROW, T4F PROD 6 ENGINE (PSO)
875hp @ 1800rpm 437-3093 3 APR13
950hp @ 1800rpm 4

C27 EP-650EKW 60HZ ACERT 345-9194 ——– JUL09
997 @ 1800 RPM 7
1068 @ 1800 RPM 8
1140 @ 1800 RPM 9
1214 @ 1800 RPM 10
REPLACED 268-4730,294-4926,331-1725

C27 EP-650EKW 60HZ ACERT 345-9195 ——– JUL09
925 @ 1800 RPM 12
976 @ 1800 RPM 13
1140 @ 1800 RPM 14
1213 @ 1800 RPM 15
REPLACED 268-4731,294-4927,333-1723

C27 EP-50HZ Low-E/BSFC 333-1722 ——– JUN08
750 KVA @ 1500 RPM 17
800 KVA @ 1500 RPM 18
680 KVA @ 1500 RPM 20
725 KVA @ 1500 RPM 21
REPLACED 268-4732

C27 EP-60HZ LOW-BSFC 441-9216 85 JUn13
0HP@0RPM 86
Replaces 385-9200,416-5246

C27 EP-60HZ TIER II PSO 360-0092 ——– APR10
792HP @ 1800RPM 69
852HP @ 1800RPM 69
872HP @ 1800RPM 70
912HP @ 1800RPM 70
939HP @ 1800RPM 71
972HP @ 1800RPM 71
1006HP @ 1800RPM 72
1073HP @ 1800RPM 72
Replaced 341-2296,351-2471

C27 EP-60HZ TIER II 441-9215 83
0HP@0RPM 84
Replaced 385-9198,416-5245

C27 EP-50/60HZ POWER MODULE TIER4 421-6479 18 APR13
900 @ 1800RPM-
REPLACED 351-4546,360-5052,365-8410
370-1542,373-3692,378-7525,390-5012,396-7438

C27 EP Petro 60HZ 371-1708 17 JUN12
1207 @ 1800RPM
Replaced

C27-EP PETRO GENSET 423-0398 17 APR13
0HP@0RPM
Replaced 371-1708,398-7439,418-5533
C27 EP-60HZ OPEN GENSET Tier4 421-6481 19 APR13
1223 @ 1800RPM
REPLACED 351-3664,360-5053,365-8411
370-1543,375-6362,378-7523,390-4644,396-7440

C27 IND-HEP 60HZ 319-7907 ——– SEP07
925 @ 1800 RPM 35
976 @ 1800 RPM 36
1041 @ 1800 RPM 37
1105 @ 1800 RPM 38
REPLACED 289-9486

C27 990K/844K LWL TIER 4 ENGINE 415-4938 1 Sep12
766HP @ 1800RPM

C27 990K/884K LWL TIER 4 ENGINE 382-8085 2 SEP12

C27 MACH 844H LWL 452-9592 92 NOV13
740hp @ 1800rpm
Replaces

C32 Ind ACERT 345-1103 ——– Mar09
950 @ 1800 RPM 19
1125 @ 1800 RPM 31
1200 @ 1800 RPM 32
1350 @ 1800 RPM 33
REPLACED 263-6357,279-5262,286-9943
316-4346

C32 IND BCD RATING TIER4i 424-8929 ——– APR13
950 @ 2100 RPM 133
1125 @ 2100 RPM 131
1200 @ 2100 RPM 132
REPLACED 357-7619,370-4529,372-7171
379-0985,384-5467,395-4290

C32 EP Tier II 60HZ ACERT 446-1310 ——– OCT13
910 EKW @ 1800 RPM 72
REPLACED 304-4176,324-6827,333-1727
375-0616

C32 EP Tier II 60HZ ACERT 446-1311 ——– OCT13
715 EKW @ 1800 RPM 73
REPLACED 304-4178,324-6828
333-1728,375-0617

C32 EP Tier II 60HZ ACERT 446-1312 ——– OCT13
625 EKW @ 1800 RPM 74
REPLACED 304-4180,324-6829
333-1729,375-0618

C32 EP Tier II 50HZ ACERT 446-1313 ——– OCT13
800 EKW @ 1800 RPM 75
REPLACED 304-4182,324-6830
333-1730, 375-0619

C32 EP Tier II 50HZ ACERT 446-1314 ——– OCT13
630 EKW @ 1800 RPM 76
REPLACED 304-4184,324-6831
333-1731,375-0620

C32 EP Tier II 50HZ ACERT 446-1315 ——– OCT13
540 EKW @ 1800 RPM 77
REPLACED 304-4186,324-6832
333-1732,375-0621

C32 EP Tier II 50HZ ACERT 446-1316 72 OCT13
1466hp @ 1800rpm
Replaces 356-5220,375-0623

C32 EP Tier II 50HZ ACERT 446-1317 73 OCT13
1152hp @ 1800rpm
Replaces 356-5224,375-0624

C32 EP Tier II 50HZ ACERT 446-1318 75 OCT13
HP RPM
1288 1500
Replaced 356-5222, 375-0625

C32 EP Tier II 50HZ ACERT 446-1319 77 OCT13
HP RPM
870 1500
Replaced 360-0094, 375-0626

C32 EP Tier II 50HZ ACERT PSO 446-1321 144 OCT13
1007hp @ 1800rpm
Replaced 369-1254

C32 Ind ACERT 345-0805 29 May09
800 @ 2100RPM
Replaced 264-9812

C32 Ind ACERT 345-1123 ——– Mar09
1016 @ 1750 RPM 38
REPLACED 289-9488

C32 Ind ACERT 344-9567 ——– May09
1110 @ 2100 RPM 70
1225 @ 2100 RPM 71
Replaced 297-4882,314-4037

C32 Ind ACERT Petroleum 345-0806 ——– 20 MAY09
1500 @ 2100 RPM
REPLACED 267-2124,282-9569,294-2398

C32 EPG Tier II 60Hz ACERT 303-1612 ——– SEP06
910 EKW @ 1800 RPM 4
810 EKW @ 1800 RPM 7
830 EKW @ 1800 RPM 21
740 EKW @ 1800 RPM 23
REPLACED 256-7791,262-8566,291-8571

C32 EP Tier II 60Hz ACERT 326-2695 ——– FEB08
910 EKW @ 1800 RPM 86
810 EKW @ 1800 RPM 87
830 EKW @ 1800 RPM 88
740 EKW @ 1800 RPM 89
Replaced N/A

C32 EPG Tier I 60Hz ACERT 326-5980 ——– MAY08
910 EKW @ 1800 RPM 4
810 EKW @ 1800 RPM 7
830 EKW @ 1800 RPM 21
740 EKW @ 1800 RPM 23
REPLACED 256-7791,262-8566,287-8177,303-1613

C32 EP 50 HZ LOW BSFC ACERT 310-2191 ——– MAY07
1136 @ 1500 RPM 17
REPLACED N/A

C32 EPG BSFC 60HZ ACERT 302-6503 ——– SEP06
1502 @ 1800 RPM 6
1357 @ 1800 RPM 22
1257 @ 1800 RPM 9
1126 @ 1800 RPM 24
REPLACED 262-8568,291-8572

C32 EP LOW BSFC 60HZ ACERT 326-5981 ——– MAY08
740 EKW @ 1800 RPM 24
810 EKW @ 1800 RPM 9
830 EKW @ 1800 RPM 22
1000 EKW @ 1800 RPM 6
REPLACED 318-0594

C32 EP LOW BSFC 60HZ ACERT 326-2694 ——– MAR08
740 EKW @ 1800 RPM 93
810 EKW @ 1800 RPM 91
830 EKW @ 1800 RPM 92
910 EKW @ 1800 RPM 90
REPLACED N/A

C32 EP Tier II 60HZ ACERT 326-5979 ——– MAY08
740 EKW @ 1800 RPM 23
810 EKW @ 1800 RPM 7
830 EKW @ 1800 RPM 21
1000 EKW @ 1800 RPM 4
REPLACED 318-0592

C32 EPG 50HZ ACERT 336-6693 ——– AUG08
910 KVA Prime 1000 KVA Standby @ 1500 Low E 10
1000 KVA Prime 1100 KVA Standby @ 1500 Low E 13
910 KVA Prime 1000 KVA Standby @ 1500 Low BSFC 12
1000 KVA Prime 1100 KBA Standby @ 1500 Low BSFC 15
830 KVA continous @ 1500 Low E 25
910 KVA Continous @ 1500 Low E 27
830 KVA continous @ 1500 Low BSFC 26
910 KVA Continous @ 1500 Low BSFC 28
REPLACED 262-8570,291-8573,303-1614,326-5982

C32 EPG Tier II 60HZ ACERT 439-4662 ——– MAY13
910 EKW @ 1800 RPM 29
1000 KVA @ 1500 RPM 29
830 EKW @ 1800 RPM 65
910 KVA @ 1500 RPM 65
REPLACED 295-0079,303-1615,316-7396
326-2696,345-9216

C32 IND Tier II PILOT ACERT 344-9568 ——– MAY09
800 HP @ 1800 RPM 66
860 HP @ 1800 RPM 67
920 HP @ 1800 RPM 68
1000 HP @ 1800 RPM 69
REPLACED 297-4880,314-4036

C32 T4 Prod 6.0.3 Tier 4 Petro C-Tier 1 A/T (PSO)
1125Hp at 1800RPM 437-2066 134 APR13

C32 PETRO-1125HP C TIER 424-8935 139 MAY13
1125HP@1800Rpm
Replaces 366-8312,379-9462,380-8337,397-2123

C32 IND-1125HP ACERT 423-9652 134 MAR13
1125HP@1800RPM
Replaces 360-2558,369-1223,371-2803,383-0732,385-4682

C32 PETRO C TIER, T4F PROD 6 ENGINE (PSO)
1125hp @ 1800rpm 437-2786 139 APR13

**************************************************************************
3408E & 3412E MARINE FLASH SERVICE RELEASE
ENGINE RATING INFORMATION FILE MODULE IC DATE
**************************************************************************

3412E Marine A LOW SPD 218-7492 40 MAR02
425/475 HP @ 1200
REPLACED 190-7381

3412E Marine A MID RANGE 218-7487 46 MAR02
503/540 HP @ 1800
REPLACED 186-4986,189-5699,194-4981

3412E Marine A MID RANGE 255-7344 76 APR04
503/540 HP @ 1800 with new style injectors
REPLACED 218-7500,235-6131

3412E Marine A MID RANGE 269-6929 88 JAN05
650/720 HP @ 1800 HI HP with new style injectors
REPLACED 235-6132,255-7345

3412E Marine A PRIME ECM 210-9631 89 JUN01
296 HP @ 1500
REPLACED 200-1114

3412E Marine A BACKUP ECM 210-9632 90 JUN01
296 HP @ 1500
REPLACED 200-1115

3412E Marine A PRIME ECM 210-9633 91 JUN01
425/475 HP @ 1200 LOW SPD
REPLACED 198-7515

3412E Marine A BACKUP ECM 210-9634 92 JUN01
425/475 HP @ 1200 LOW SPD
REPLACED 198-7516

3412E Marine A PRIME ECM 210-9621 67 JUN01
503/540 HP @ 1800 LOW HP
REPLACED 194-1836, 198-7505

3412E Marine A BACKUP ECM 210-9622 68 JUN01
503/540 HP @ 1800 LOW HP
REPLACED 194-1841, 198-7506

3412E Marine A PRIME ECM 210-9623 64 JUN01
650/720 HP @ 1800 HI HP
REPLACED 194-1837, 198-7507

3412E Marine A BACKUP ECM 210-9624 69 JUN01
650/720 HP @ 1800 HI HP
REPLACED 194-7508, 198-7508

3412E Marine A PRIME ECM 210-9625 65 JUN01
600/615/635 HP @ 1800
REPLACED 194-1838, 198-7509

3412E Marine A BACKUP ECM 210-9626 70 JUN01
600/615/635 HP @ 1800
REPLACED 194-1843, 198-7510

3412E Marine B PRIME ECM 210-9627 66 JUN01
624/671 HP @ 1800
REPLACED 194-1839, 198-7511

3412E Marine B BACKUP ECM 210-9628 71 JUN01
624/671 HP @ 1800
REPLACED 194-1844, 198-7512

3412E Marine C PRIME ECM 210-9629 63 JUN01
764 HP @ 2100
REPLACED 194-1840, 198-7513

3412E Marine C BACKUP ECM 210-9630 62 JUN01
764 HP @ 2100
REPLACED 194-1845, 198-7514

3412E Marine A MID RANGE 218-7489 50 MAR02
600/615/635 HP @ 1800
REPLACED 186-4988,189-5701,194-4983

3412E Marine A MID RANGE 269-6930 77 JAN05
600/615/635 HP @ 1800 with new style injectors
REPLACED 235-6133,255-7346

3412E Marine E 218-7496 36 MAR02
1200/1250/1300/1350/1400 HP @ 2300
REPLACED 194-4989

3412E Marine E 255-7353 100 APR04
1200/1250/1300/1350/1400 HP @ 2300
Replaced 218-2970,235-6140

3412E Marine E 227-3845 105 SEP02
1550/1600 HP @ 2300
REPLACED 225-3165
3412E Marine D 218-7495 42 MAR02
900/950/1000/1050/1100 HP @ 2100
REPLACED 194-4988

3412E Marine D 255-7352 42 APR04
900/950/1000/1050/1100 HP @ 2100 with new style injectors
REPLACED 235-6139 IC 127

3412E Marine D Fast Craft 218-7499 44 MAR02
1200 HP @ 2300
REPLACED 194-4992

3412E Marine D Fast Craft 255-7356 44 APR04
1200 HP @ 2300 with new style injectors
REPLACED 235-6144 IC 130

3412E Marine C 218-7493 48 MAR02
750/825 HP @ 2100
REPLACED 194-4986

3412E Marine C 255-7350 125 APR04
750/825 HP @ 2100 with new style injectors
REPLACED 218-7506,235-6137

3412E Marine C 218-7494 41 MAR02
750/800/850/900 HP @ 2300
REPLACED 194-4987

3412E Marine C 255-7351 126 APR04
750/800/850/900 HP @ 2300 with new style injectors
REPLACED 218-7507,235-6138

3412E Marine C Fast Craft 218-7498 49 MAR02
1000/1100 HP @ 2100
REPLACED 194-4991

3412E Marine C Fast Craft 255-7355 129 APR04
1000/1100 HP @ 2100 with new style injectors
REPLACED 218-7510,235-6143

3412E Marine B Mid Range 218-7490 47 MAR02
671/624 HP @ 1800
REPLACED 156-8241, 186-4989, 189-5702, 194-4984

3412E Marine B Mid Range 255-7347 78 APR04
671/624 HP @ 1800 with new style injectors
REPLACED 198-7495, 218-7503,235-6134

3412E Marine C 218-7491 39 MAR02
764 HP @ 2100
REPLACED 156-8239, 186-4990, 189-5703, 194-4985

3412E Marine C 255-7348 79 APR04
764 HP @ 2100 with new style injectors
REPLACED 218-7504,235-6135

3412E Marine B Fast Craft 218-7497 43 MAR02
750/850/925 HP @ 2100
REPLACED 194-4990

3412E Marine B Fast Craft 255-7354 128 APR04
750/850/925 HP @ 2100 with new style injectors
REPLACED 218-7509,235-6142

3412E Marine A 255-7349 123 APR04
425/475 HP @ 1200 with new style injectors
REPLACED 218-7492,218-7505,235-6136

3412E Marine A High Power 218-7488 26 MAR02
650/720 HP @ 1800
REPLACED 194-4982

C18 MAR- 50HZ 447-2918 201 SEP13
662HP@1500RPM
Replaces 384-2775

C18 MAR-465BKW 60HZ 447-2914 182 SEP13
624HP@1800RPM
Replaces 370-1566,389-7967,428-7988

C18 MAR-AUX SCAC 50HZ 447-2916 199 SEP13
513HP@1500RPM
Replaces 384-2771

C18-MAR-AUX SCAC 50HZ 447-2917 200 SEP13
587HP@1500RPM
Replaces 384-2773

C18-MAR AUX SCAC 60HZ 447-2919 181 SEP13
499HP@1800RPM
Replaces 384-2777

C18-MAR-AUX SCAC 50HZ 447-2923 200 SEP13
587HP@1500RPM
Replaces 384-2785

C18-MAR-AUX SCAC 60HZ 447-2920 182 SEP13
624HP@1800RPM
Replaces 384-2779

C18 MAR- AUX SCAC 50HZ 447-2921 198 SEP13
402HP@1500RPM
Replaces 384-2781

C18 mar-aux SCAC 50hz 447-2922 199 SEP13
513HP@1500RPM
Replaces 384-2783

C18 MAR-AUX SCAC 50HZ 447-2924 201 SEP13
662HP@1500RPM
Replaces 384-2787

C18 Marine 460 A Tier 293-3857 60 SEP06
453 HP @ 2100 RPM
REPLACED N/A

C18 Marine 485 B Tier 307-9739 58 JAN07
478 HP @ 2100 RPM
REPLACED 293-3847

4451991 Marine PRIM 310-7692 37 MAR07
617 HP @ 1800 RPM
REPLACED 273-2203,290-6507

C18 MAR-470HP PROP 447-2896 196 NOV13
470HP@1800RPM
Replaces 383-3506,432-5961

C18 MAR-600HP PROP 447-2897 197 NOV13
600HP@1800RPM
Replaces 386-6351,432-5962

C18 MAR-TIER3 447-2898 195 NOV13
624HP@1800RPM
Replaced 398-7430,432-5963

C18 MAR-624HP AUX 447-2899 195 NOV13
624HP@1800RPM
Replaces 383-3508,432-5964

C18 MAR-670.5 HP PROP 453-5959 193 OCT13
670HP@1800RPM
Replaces 383-3510,432-5965,447-2900

C18 MAR-715HP PROP 453-5960 194 OCT13
715HP@1800RPM
Replaced 386-6353,432-5966,447-2901

C18 MAR-803HP AUX 447-2903 191 NOV13
803HP@1800RPM
Replaced 383-1251,432-5968

C18 MAR-TIER3 447-2902 191 NOV13
803HP@1800RPM
Replaces 398-7432,432-5967

C18 MAR-1015HP PROP 447-2905 189 NOV13
1015HP@2300RPM
Replaces 383-1255,432-5970

C18 MAR-1136HP PROP 447-2906 190 OCT13
1136HP@2300RPM
Replaces 386-6355,432-5971

C18 Marine 725 C Tier 392-9850 54 APR12
715 HP @ 2100 RPM
REPLACED 293-3845,330-9831,364-5979

C18 Marine 680 B Tier 293-3853 55 SEP06
670 HP @ 2100 RPM
REPLACED N/A

C18 Marine 560 B Tier 392-9847 57 APR12
552 HP @ 2100 RPM
REPLACED 293-3849,330-9828,364-5976

C18 Marine PRIM 310-7688 51 MAR07
822 HP @ 2200 RPM
REPLACED 284-8573

C18 Marine D Tier PRIM 310-7690 38 MAR07
822 HP @ 2200 RPM
REPLACED 261-7253,273-2201

C18 Marine D Tier BKUP 310-7691 42 MAR07
822 HP @ 2200 RPM
REPLACED 261-7254,273-2202

C18 Marine SEC 310-7693 43 MAR07
617 HP @ 1800 RPM
Replaced 273-2204,290-6508

C18 Marine SEC 310-7689 52 MAR07
822 HP @ 2200 RPM
REPLACED 284-8574

C18 EP-50HZ Marine Aux 353-7990 72 OCT09
404 HP @ 1500 RPM
Replaced 299-5791

C18 EP-50HZ Marine Aux Package 353-7997 72 OCT09
404 HP @ 1500 RPM
Replaced 300-5340

C18 EP-50HZ Marine Aux 353-7991 73 OCT09
514 HP @ 1500 RPM
Replaced 299-5793

C18 EP-50HZ Marine Aux Package 353-7998 73 OCT09
514 HP @ 1500 RPM
Replaced 300-5341

C18 EP-50HZ Marine Aux 353-7992 74 OCT09
587 HP @ 1500 RPM
Replaced 299-5795

C18 EP-50HZ Marine Aux Package 353-7999 74 OCT09
587 HP @ 1500 RPM
Replaced 300-5342

C18 EP-50HZ Marine Aux 353-7993 75 OCT09
660 HP @ 1500 RPM
Replaced 299-5797

C18 EP-50HZ Marine Aux Package 353-8000 75 OCT09
660 HP @ 1500 RPM
Replaced 300-5343

C18-MAR AUX SCAC 60HZ 384-2777 181 APR13
499HP @ 1800RPM

C18 EP-60HZ Marine Aux 353-7994 76 OCT09
499 @ 1800 RPM
REPLACED 299-5799,314-9288
332-6650

C18 EP-60Hz Marine Aux Package 353-8001 76 OCT09
499 @ 1800 RPM
Replaced 300-5344,321-3871
345-3692

C18 EP-60HZ Marine Aux 352-8507 77 SEP09
624 @ 1800 RPM
REPLACED 299-5801,321-3875
332-6651,345-3689

C18 EP-60HZ Marine Aux Package 352-8508 77 SEP09
624 @ 1800 RPM
REPLACED 300-5345,321-3872
345-3693

C18 EP-60HZ Marine Aux 353-7995 78 OCT09
733 @ 1800 RPM
REPLACED 299-5803,321-3876
332-6652,345-3690

C18 EP-60HZ Marine Aux Package 353-8002 78 OCT09
733 @ 1800 RPM
Replaced 300-5346,321-3873
345-3694

C18 EP-60HZ Marine Aux 353-7996 79 OCT09
806 @ 1800 RPM
REPLACED 299-5805,321-3877
322-6635,345-3691

C18 EP-60HZ Marine Aux Package 353-8003 79 OCT09
806 @ 1800 RPM
Replaced 300-5347,321-3874
345-5347

C18 Marine PRIM 325-1731 102 JAN08
822 HP @ 2200 RPM
REPLACED 313-7560

C18 Marine BKUP 327-0236 103 MAR08
822 HP @ 2200 RPM
REPLACED 313-7561,325-1732

C18 Marine PRIM 325-1733 104 JAN08
618 HP @ 1800 RPM
REPLACED 313-7563

C18 Marine SEC 327-0237 105 MAR08
618 HP @ 1800 RPM
REPLACED 313-7564,325-1734

C18 MAR-PROP SCAC 447-2910 178 SEP13
600HP@1800RPM
Replaces 370-1552,396-6420
C30 Marine High Power 255-7341 105 APR04
1500/1550 HP @ 2300
Replaced 235-6145

C18 MAR-PROP SCAC 447-2912 180 SEP13
715HP@2100RPM
Replaces 370-1556,396-6422

C18 MAR-PROP SCAC 447-2911 179 SEP13
671HP@2100RPM
Replaces 370-1554,396-6421

C18 MAR-AUX SCAC 50HZ 384-2787 201 APR13
662HP@1500RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2773 200 APR13
587HP@1500RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2771 199 APR13
513HP@1500RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2779 182 APR13
624HP@1800RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2781 198 APR13
402HP@1500RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2783 199 APR13
513HP@1500RPM
Replaces

C18-MAR-AUX SCAC 50HZ 384-2785 200 APR13
587HP@1500RPM
Replaces

C18 MAR-465BKW 60HZ 428-7988 182 APR13
624HP@1800RPM
Replaces

C18 MAR-479BHP A-TIER 447-2908 204 SEP13
479HP@1800RPM
Replaces 384-2762

C18 MAR-553BHP B-TIER 447-2909 205 SEP13
553HP@2100RPM
Replaces 384-2764,

C18 MAR-454BHP A-TIER 447-2907 203 SEP13
454HP@1800RPM
Replaces 384-2760

C18 MAR-803HP PROP 447-2904 188 NOV13
803HP@2100RPM
Replaces 383-1253,432-5969

C30 Marine High Power 239-5982 149 NOV03
1550/1652 HP @ 2300
REPLACED 239-4118

C32 Marine E Tier ACERT 300-2958 1 Mar09
1825 HP @ 2300 RPM
Replaced 262-9182,268-9505,
274-7619,280-2817,286-9669

C32 Marine-C Tier ACERT 295-8790 43 SEP06
1450 HP @ 2300 RPM
Replaced N/A

C32 Marine ACERT PRIM 378-7821 44 SEP13
1300 HP @ 1800 RPM
REPLACED 295-8794,311-0211,328-5424
343-4615,359-2871,374-6683,376-2294

C32 Marine B Tier ACERT 378-7819 45 SEP13
1300 HP @ 2100 RPM
REPLACED 295-8798,311-0213,328-5426
359-1971,374-6681,376-2292

C32 Marine ACERT PRIM 311-0216 47 APR07
950 HP @ 1600 RPM
REPLACED 295-8807

C32 Marine-A Tier ACERT 379-9479 49 SEP13
1000 HP @ 1800 RPM
Replaced 295-8815,328-5432,359-1969
374-6677,376-2288

C32 Marine-A Tier ACERT 295-8829 50 SEP06
850 HP @ 1600 RPM
Replaced N/A

C32 Marine-A Tier ACERT 295-8833 51 SEP06
750 HP @ 1800 RPM
Replaced N/A

C32 Marine-C Tier ACERT 295-8791 55 SEP06
1450 HP @ 2300 RPM
Replaced N/A

C32 Marine ACERT SEC 311-0212 56 APR07
1300 HP @ 1800 RPM
REPLACED 295-8795

C32 Marine B Tier ACERT 311-0214 57 APR07
1300 HP @ 2100 RPM
REPLACED 295-8799

C32 Marine ACERT SEC 311-0217 59 APR07
950 HP @ 1600 RPM
REPLACED 295-8808

C32 Marine-A Tier ACERT 295-8816 61 SEP06
1000 HP @ 1800 RPM
Replaced N/A

C32 Marine-A Tier ACERT 295-8830 62 SEP06
850 HP @ 1600 RPM
Replaced N/A

C32 Marine-A Tier ACERT 295-8834 63 SEP06
750 HP @ 1800 RPM
Replaced N/A

C32 Marine-A Tier ACERT 295-8921 64 SEP06
660 HP @ 1800 RPM
Replaced N/A

C32 Marine ACERT PRIM 311-0220 82 APR07
950 HP @ 1600 RPM
REPLACED N/A

C32 Marine ACERT SEC 311-0221 83 APR07
950 HP @ 1600 RPM
REPLACED N/A

C32 Marine-E Tier 284-3109 148 OCT05
1550/1652 HP @ 2300 RPM
Replaced 239-4118,239-5982,255-7343

C32 Marine High Power 255-7342 149 APR04
1400 HP @ 2300 RPM
Replaced 245-3636

C32 Marine-Prop 332-9398 155 JUN08
1550 HP @ 2300 RPM
Replaced 264-1229

C32 MAR-1800RPM-AUX 433-3603 151 AUG13
1047HP@1800RPM 152
1333HP@1800RPM
Replaces 379-9467

C32 Marine Tier 3 453-9933
1600 HP @ 2300 RPM 156 Oct13
1800 HP @ 2300 RPM 157
1900 HP @ 2300 RPM 158
Replaced 370-4865,379-9475,419-0049,431-9761,433-3607
443-5269,452-5989

C32 Marine Prop Tier 3 419-0047
1000 HP @ 1800 RPM 145 Oct12
750 HP @ 1800 RPM 146 Oct12
850 HP @ 1600 RPM 147 Oct12
850 HP @ 1800 RPM 149 Oct12
Replaced 417-1481, 378-1572

C32 MAR-2100RPM-PROP 433-3606 May13
1450HP@2100RPM 150
Replaces 379-9473

C32 MAR-1800RPM-PROP 433-3605 MAY13
1200HP@1800RPM 154
1300HP@1800RPM 155
Replaces 379-9471,419-0048

C32 MAR-1600RPM-PROP 433-3601 MAY13
1000HP@1800RPM 145
750HP@1600RPM 146
850HP@1600RPM 147
850HP@1800RPM 149
Replaces 378-1572,417-1481,419-0047

C32 PROP SCAC TIER 2 MARINE 419-7819 APR13
660HP@1800RPM, 169
750HP@1800RPM, 170
850HP@1800RPM, 172
950HP@1600RPM 173
1000HP@1800RPM 168

C32 MAR-PROP ACERT PRIMARY 419-7821 174 APR13
1200hp@2000rpm

C32 MAR-PRIM ENGINE 419-7823 APR13
1300HP@1800RPM 175
1300HP@2100RPM 176
1450HP@2300RPM 177

C32 MAR-AUX 60HZ 396-8923 184 SEP13
1074HP@1800RPM 185
916HP@1800RPM

C32 MAR-AUX 50HZ 396-8925 189 SEP13
1172HP@1500RPM

C32 MAR-AUX 50HZ 396-8927 187 SEP13
791HP@1500RPM 188
923HP@1500RPM

C32 MAR-AUX 60HZ 396-8921 186 SEP13
1333HP@1800RPM

**************************************************************************
C18 Progress Rail FLASH SERVICE RELEASE
ENGINE RATING INFORMATION FILE MODULE IC DATE
**************************************************************************

C18 IND-556KW PRS 348-5736 112 APR10
745HP @ 1900RPM
Replaced 3226-2261,332-2769

GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG

GAS 3500 3600

FLASH A4-ISM 451-5846 N/A OCT13
0HP@0RPM
Replaces 376-9431,381-8830
381-8820,381-8821

C175 EP-50HZ PETRO -sec 394-8301 73 OCT13
0HP@0RPM
Replaces

C175 EP-50HZ PETRO -PRIM 394-8300 72 OCT13
0HP@0RPM
Replaces

3516C HD MAR-DEP 1800RPM 451-6170 106 OCT13
0HP@1800RPM
Replaces 449-0187

C280-12 MAR-3800/3460BKW 451-4714 NOV13
4640HP@900RPM 18
5096HP@900RPM 19
Replaces 380-1185,426-1907,433-6664
================================================================================
C-10/C-12/C-15/C-16/C-18 October 02 Flash File Cross Reference
Updated July 24,2008 AJK

Heavy-Duty Ratings for October 2002-up Engines
**********************************************

The boxes shown below indicate unique ratings families.
Ratings within these boxes share common iron sets and
can be rerated to another rating within the same box.
Ratings changes are only allowed within a particular box.
All ratings are subject to change without notice.

Adv HP Max. HP Peak Torque Gov Speed
***********************************************************
*C-10 (10.3L) *
*305 315 1050 2100 *
*335 350 1250 2100 *
***********************************************************
*C-12 (11.9L) *
***** *
*355 370 1350 2100 *
*380 395 1450 2100 *
*410 425 1450 2100 *
*355/410 415 1350/1450 2100 *
***********************************************************
*335 420 1550 2100 *
*410 425 1550 2100 *
*430 445 1550 2100 *
*380/430 445 1450/1550 2100 *
***********************************************************
*430 445 1650 2100 *
*380/430 445 1450/1650 2100 *
***********************************************************
*425 425 1550 2100 Firetruck/RV only*
*455 455 1550 2100 Firetruck/RV only*
***********************************************************
*505 505 1550 2100 RV only *
***********************************************************
*C-15 (14.6L) *
***** *
*435 450 1550 2100 Brakesaver avail.*
*435 450 1650 2100 Brakesaver avail.*
*475 490 1650 2100 Brakesaver avail.*
*500 515 1650 2100 Field rerate only*
*435/500 515 1550/1650 2100 *
*435/500 515 1550/1650 2100 Oil well service *
***********************************************************
*475 490 1750 2100 Brakesaver avail.*
*500 515 1850 2100 Brakesaver avail.*
*525 525 1850 2100 Brakesaver avail.*
***********************************************************
*450/515 515 1550/1650 2100 RV only *
***********************************************************
* C-18 *
****** *
*625 2049 1900 *
*700 1900 1900 *
***********************************************************

The 1500 lb.ft. low torque C-15 has been removed from our lineup. Also,
the C-15 515hp (RV only) rating has been changed to a MultiTorque. As
stated on the top of the chart, ratings changes are only allowed within
a particular box. All ratings are subject to change without notice.

FLASHFILES
***************************************************************************
C-10 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************

305 HP 1050 LB-FT 2100 RPM MBJ00001-UP 242-8336 220 AUG03
Replaced 228-8022, 235-1371 (old code 210)

335 HP 1250 LB-FT 2100 RPM MBJ00001-UP 272-6461 221 MAR05
Replaced 228-8023,235-1372,
242-8337 (old code 211)

335 HP 1250 LB-FT 2100 RPM MBJ00001-UP 242-8338 225 AUG03
Replaced 228-8024, 235-1373 Haliburton IAS (old code 215)
***************************************************************************
***************************************************************************
C-12 MBL00001-00999 Parts Service Only
***************************************************************************

355 HP 1350 LB-FT 2100 RPM MBL1-00999 239-5968 241 Jun03
REFERENCE 224-3448 IC 201
Replaced 232-3985

355/410 HP 1350/1450 LB-FT 2100 RPM MBL1-00999 239-5967 244 Jun03
MULTITORQUE REFERENCE 224-3449 IC 204
Replaced 232-3986

380 HP 1450 LB-FT 2100 RPM MBL1-00999 239-5966 242 Jun03
REFERENCE 224-3450 IC 202
Replaced 232-3987

410 HP 1450 LB-FT 2100 RPM MBL1-00999 239-5964 246 Jun03
REFERENCE 224-3452 IC 206
Replaced 232-3989
***************************************************************************
335 HP 1550 LB-FT 2100 RPM MBL1-00999 239-5969 240 Jun03
REFERENCE 224-3447 IC 200
Replaced 232-3984

380/430 HP 1450/1550 LB-FT 2100 RPM MBL1-00999 239-5965 248 Jun03
1450/1650 LB-FT
MULTITORQUE REFERENCE 224-3451 IC 208
Replaced 232-3988

410 HP 1550 LB-FT 2100 RPM MBL1-00999 239-5963 247 Jun03
REFERENCE 224-5869 IC 207
Replaced 232-3990

430 HP 1550/1650 LB-FT 2100 RPM MBL1-00999 239-5962 249 Jun03
REFERENCE 216-5006 & 224-3453 IC 209
Replaced 232-3991

***************************************************************************
C-12 MBL01000-up
***************************************************************************

355 HP 1350 LB-FT 2100 RPM MBL01000-UP 236-8686 221 May03
REPLACED 228-8027, 231-9235,235-1375

355/410 HP 1350/1450 LB-FT 2100 RPM MBL01000-UP 236-8687 224 May03
MULTITORQUE REPLACED 228-8028, 231-9236, 235-1377

380 HP 1450 LB-FT 2100 RPM MBL01000-UP 241-8404 222 Jul03
REPLACED 228-8029, 231-9237, 235-1738, 236-8688

410 HP 1450 LB-FT 2100 RPM MBL01000-UP 241-8403 226 Jul03
REPLACED 228-8031,231-9240,235-1381,236-8691
***************************************************************************
335 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6464 220 MAR05
REPLACED 228-8026,231-9234,
235-1374,236-8685

380/430 HP 1450/1550 LB-FT 2100 RPM MBL01000-UP 272-6465 235 MAR05
MULTITORQUE
REPLACED 228-8059,231-9238,
235-1379,236-8689

410 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6467 227 MAR05
REPLACED 228-8032,231-9241,
235-1382,236-8692

410 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6468 233 MAR05
Haliburton
REPLACED 228-8033,231-9242,
235-1383,236-8693

430 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6470 237 MAR05
REPLACED 228-8035,231-9244,
235-1385,236-8695
***************************************************************************
380/430 HP 1450/1650 LB-FT 2100 RPM MBL01000-UP 272-6466 236 MAR05
MULTITORQUE
REPLACED 228-8030,231-9239,
235-1380,236-8690

430 HP 1650 LB-FT 2100 RPM MBL01000-UP 272-6471 238 MAR05
REPLACED 229-1634,231-9245,
235-1386,236-8696

430 HP 1650 LB-FT 2100 RPM MBL01000-UP 272-6472 232 MAR05
Haliburton IAS
REPLACED 228-8036,231-9246,
235-1387,236-8697
***************************************************************************
425 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6469 234 MAR05
Firetruck & RV only
REPLACED 228-8034,231-9243,
235-1384,236-8694

455 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6473 260 MAR05
Firetrk/RV only (old code 230)
REPLACED 228-8037,231-9247,235-1380,
236-8698,242-8339
***************************************************************************
505 HP 1550 LB-FT 2100 RPM MBL01000-UP 272-6474 261 MAR05
RV only (old code 231)
REPLACED 228-8038,231-9248,
235-1389,236-8699,242-8340
***************************************************************************

C-15
***************************************************************************

435 HP 1550/1650 LB-FT 2100 RPM MBN00001-UP 272-6609 206 MAR05
REPLACED 228-8040,231-9249,
234-7580,236-8700

435 HP 1550/1650 LB-FT 2100 RPM MBN00001-UP 272-6610 207 MAR05
BRAKESAVER
REPLACED 228-8041,231-9250,
234-7581,236-8701

435/500 HP 1550/1650 LB-FT 2100 RPM MBN00001-UP 272-6611 208 MAR05
MULTITORQUE
REPLACED 228-8042,231-9251,
234-7582,236-8702

435/500 HP 1550/1650 LB-FT 2100 RPM MBN00001-UP 272-6612 220 MAR05
MULTITORQUE/ (OWS) OIL WELL SERVICE
REPLACED 228-8043,231-9252,
234-7583,236-8703

475 HP 1650 LB-FT 2100 RPM MBN00001-UP 272-6614 212 MAR05
REPLACED 228-8044,231-9254,
234-7585,236-8705,251-3753

475 HP 1650 LB-FT 2100 RPM MBN00001-UP 272-6615 214 MAR05
BRAKESAVER
REPLACED 228-8045,231-9255,
234-7586,236-8706

500 HP 1650 LB-FT 2100/2300 RPM MBN00001-UP 272-6618 221 MAR05
FIELD UPRATE
REPLACED 228-8049,231-9258,
234-7589,236-8709
***************************************************************************
475 HP 1750 LB-FT 2100 RPM MBN00001-UP 272-6616 213 MAR05
REPLACED 228-8046,231-9256,
234-7587,236-8707

475 HP 1750 LB-FT 2100 RPM MBN00001-UP 272-6617 215 MAR05
BRAKESAVER
REPLACED 228-8047,231-9257,
234-7588,236-8708

500 HP 1850 LB-FT 2100 RPM MBN00001-UP 272-6619 226 MAR05
REPLACED 228-8050,231-9259,
234-7590,236-8710

500 HP 1850 LB-FT 2100 RPM MBN00001-UP 272-6620 227 MAR05
BRAKESAVER
REPLACED 228-8051,231-9260,
234-7591,236-8711

525 HP 1850 LB-FT 2100 RPM MBN00001-UP 272-6621 228 MAR05
REPLACED 228-8055,231-9261,
234-7592,236-8712

525 HP 1850 LB-FT 2100 RPM MBN00001-UP 272-6622 230 MAR05
BRAKESAVER
REPLACED 228-8056,231-9262,
234-7593,236-8713

525 HP 1850 LB-FT 2100/2300 RPM MBN00001-UP 272-6623 231 MAR05
FIELD UPRATE
REPLACED 228-8052,231-9263,
234-7594,236-8714

525 HP 1850 LB-FT 2100/2300 RPM MBN00001-UP 272-6624 232 MAR05
BRAKESAVER FIELD UPRATE
REPLACED 228-8053,231-9264
234-7595,236-8715
525 HP 1771 LB-FT 2100 RPM MBN00001-UP 268-0221 164 APR05
SNOWBLOWER
REPLACED 251-1628
***************************************************************************
450/515 HP 1550/1650 LB-FT 2100 RPM MBL00001-UP 272-6613 210 MAR05
MULTITORQUE/RV ONLY
REPLACED 228-8058,231-9253,
234-7584,236-8704
***************************************************************************
C-18
***************************************************************************
625 HP 2049 LB-FT 1900 RPM MDP0001-up MEP0001-UP 268-0224 3 APR05
EURO3
REPLACED 184-8094,231-7596,232-2646,
235-6400,241-0814,251-1625

700 HP 1900 LB-FT 2100 RPM MDP0001-up MEP0001-UP 241-0817 1 JUN03
(UK HETT)
REPLACED 227-5521,232-2647,238-2680,239-4147

700 HP 1900 LB-FT 2100 RPM MDP0001-up MEP0001-UP 232-2648 1 NOV02
(Charmichael)
REPLACED 227-5522

700 HP 2000 RPM HWT-533KW CPD ACERT 318-7276 5 AUG07
UK COMMERCIAL DEFENSE PRODUCT-COLD TEST RATING
REPLACED 289-9686
***************************************************************************
European On Highway Truck
***************************************************************************
C-12
***************************************************************************
325 HP 1250 LB-FT 1900 RPM CPD00276-UP 267-5139 42 DEC04
EURO3
REPLACED 224-7278

380 HP 1400 LB-FT 1900 RPM CPD00276-UP 267-5140 43 DEC04
EURO3
REPLACED 224-7279

380/430 HP 1400/1550 LB-FT 1900 RPM CPD00276-UP 267-5141 44 DEC04
EURO3 M/T
REPLACED 224-7280

430 HP 1550 LB-FT 1900 RPM CPD00276-UP 267-5142 45 DEC04
EURO3
REPLACED 224-7281
**************************************************************************
C-16
**************************************************************************
680 HP 1951 LB-FT 2100 RPM 267-5143 162 JAN05
ARFF
REPLACED 251-1626

650 HP 1951 LB-FT 2100 RPM 297-8779 163 JUL06
SNOWBLOWER
REPLACED 251-1629,268-0223

================================================================================
C11/C13/C15 ACERT Flash File Cross Reference
Updated January 27, 2009 dba
On-Highway Truck Engines

NOTE: C11, C13,and C15 files are serial number range specific

FLASHFILES
***************************************************************************
C11 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************
305 HP 1050 LB-FT 2100 RPM KCA1-1456 291-2050 20 MAR06
Replaced 256-6457,264-6355,270-0317

305 HP 1050 LB-FT 2100 RPM KCA1457-up 305-4391 30 NOV06
RFT Injectors
Replaced 256-5727,262-4382,265-9436,
270-0294,271-2914,291-2016

335 HP 1250 LB-FT 2100 RPM KCA1-01456 291-2051 21 MAR06
Replaced 256-6458,264-6356,270-0318

335 HP 1250 LB-FT 2100 RPM KCA1457-up 305-4392 31 NOV06
RFT Injectors
Replaced 256-5728,262-4383,270-0295,
271-2915,291-2017

335 HP 1250 LB-FT 2100 RPM KCA1-01456 291-2052 24 MAR06
Inlet Air Shutoff
Replaced 256-6461,264-6357,270-0319

335 HP 1250 LB-FT 2100 RPM KCA1457-up 305-4393 34 NOV06
Inlet Air Shutoff
Replaced 256-5731,262-4384,265-9438,
270-0296,271-2916,291-2018

350 HP 1350 LB-FT 2100 RPM KCA1-01456 291-2053 22 MAR06
Replaced 229-4911,249-7596,
251-3555,256-6459,264-6358,270-0321

350 HP 1350 LB-FT 2100 RPM KCA1457-up 305-4394 32 NOV06
RFT Injectors
Replaced 256-5729,262-4385,265-9439,
270-0297,271-2917,291-2019

350 HP 1350 LB-FT 2100 RPM KCA1457-up 305-4395 35 NOV06
Inlet Air Shutoff
Replaced 253-9429,262-4386
265-9440,270-0298,271-2918,291-2020

350HP 1450 lb-ft 2100 RPM KCA1-01456 294-4818 26 MAY06
Replaced 256-6462,264-6359,270-0322,
291-2054

350HP 1450 lb-ft 2100 RPM KCA1457-up 305-4396 36 NOV06
RFT Injectors
Replaced 262-4387,265-9441,270-0299,
271-2919,291-2021

370 HP 1350 LB-FT 2100 RPM KCA1-01456 291-2055 23 MAR06
Replaced 247-1273,249-7597,
251-3556,256-6460,264-6360,270-0323

370 HP 1350 LB-FT 2100 RPM KCA1457-up 305-4397 33 NOV06
RFT Injectors
Replaced 256-5730,262-4388,265-9442,
270-0300,271-2920,291-2022

370HP 1450 lb-ft 2100 RPM KCA1457-up 305-4398 37 NOV06
RFT Injectors
Replaced 262-4389,270-0301,271-2921,
291-2023
***************************************************************************
***************************************************************************
C13 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
***************************************************************************
335 HP 1550 LB-FT 2100 RPM KCB00508-6811 291-2056 37 MAR06
With factory installed 239-4908 injectors
Replaced 251-4585,256-5323,264-6684

380 HP 1450 LB-FT 2100 RPM KCB00508-5433* 291-2058 31 MAR06
With factory installed 239-4908 injectors
Replaced 251-4580,256-5324,264-6686,
271-2867

380 HP 1400 LB-FT 2100 RPM KCB00508-6811 291-2057 38 MAR06
With factory installed 239-4908 injectors
Replaced 251-4586,264-6685

410 HP 1450 LB-FT 2100 RPM KCB00508-6811 291-2059 32 MAR06
With factory installed 239-4908 injectors
Replaced 251-4581,256-5325,264-6687,
271-2868

410 HP 1450/1550LB-FT M/T 2100 RPM KCB00508-6811 291-2060 46 MAR06
Oil Well Service (OWS)
With factory installed 239-4908 injectors
Replaced 251-4594,264-6688

410 HP 1450/1650LB-FT M/T 2100 RPM KCB00508-6811 291-2061 43 MAR06
With factory installed 239-4908 injectors
Gear Fast/Run Slow (For Eaton Top 2)
Replaced 251-4591,264-6689

410 HP 1450/1650LB-FT M/T 2100 RPM KCB00508-6811 291-2062 44 MAR06
With factory installed 239-4908 injectors
Replaced 251-4592,264-6690

410 HP 1550 LB-FT 2100 RPM KCB00508-6811 291-2063 39 MAR06
With factory installed 239-4908 injectors
Replaced 251-4587,264-6691

410 HP 1550 LB-FT IAS 2100 RPM KCB00508-6811 291-2069 40 MAR06
With factory installed 239-4908 injectors
Inlet Air Shutoff
Replaced 251-4588,264-6692

430 HP 1550 LB-FT 2100 RPM KCB00508-5433* 291-2065 41 MAR06
With factory installed 239-4908 injectors
Replaced 251-4589,264-6693

430 HP 1550 LB-FT 2100 RPM KCB00508-5433* 291-2069 42 MAR06
With factory installed 239-4908 injectors
Inlet Air Shutoff
Replaced 251-4590,264-6697

430 HP 1550/1750LB-FT M/T 2100 RPM KCB00508-5433* 291-2067 45 MAR06
With factory installed 239-4908 injectors
Replaced 245-5999,249-7599,251-4593,264-6695

430 HP 1650 LB-FT 2100 RPM KCB00508-5433* 291-2068 34 MAR06
With factory installed 239-4908 injectors
Replaced 248-0777,249-7609,251-4582,264-6696

430 HP 1550/1750LB-FT MT 2100 RPM KCB00508-5433* 291-2066 35 MAR06
With factory installed 239-4908 injectors
Gear Fast/Run Slow (Eaton 2)
Replaced 248-0776,249-7608,251-4583,264-6694

470 HP 1650 LB-FT 2100 RPM KCB00508-6811 264-6698 47 OCT04
With factory installed 239-4908 injectors
RV RATING
Replaced 245-6000,251-4596

470 HP 1650 LB-FT 2100 RPM KCB6812-UP 262-4539 85 AUG04
RV RATING
With factory installed 249-0708 injectors
Replaced 251-5700,258-7365

525 HP 1650 LB-FT 2100 RPM KCB00508-2076 249-7606 36 DEC03
RV RATING
With factory installed 244-7695 injectors

525 HP 1650 LB-FT 2100 RPM KCB02077-6862 291-2072 51 MAR06
RV RATING
With factory installed 246-7697 injectors
Replaced 244-7695,256-5321,264-6700

525 HP 1650 LB-FT 2100 RPM KCB06863-UP 291-2076 87 MAR06
RV RATING
With factory installed 249-0697 injectors
Replaced 256-5319,264-6702

525 HP 1650 LB-FT 2100 RPM KCB6812-UP 318-9503 96 AUG07
RV RATING
(Only compatible with 259-8418 or 10R2878 turbo installed)
RFT Injectors
Replaced 262-4542,265-9579,272-3131,
285-3673,291-2048,307-1471

470/455HP 1650/1550LB-FT MT 2100 RPM KCB00508-6811 291-2071 48 MAR06
With factory installed 239-4908 injectors
FT RATING
Replaced 245-0208,251-4597,264-6699

470/455HP 1650/1550LB-FT M/T 2100 RPM KCB6812-UP 262-4540 86 AUG04
FT RATING
With factory installed 249-0708 injectors
Replaced 251-5702

525/455 HP 1650/1550 LB-FT 2100 RPM KCB00508-6862 249-7607 49 DEC03
FT RATING
With factory installed 223-7478, 246-7842 injectors
Replaced 242-8335,245-0210

525/455 HP 1650/1550 LB-FT 2100 RPM KCB00508-6862 291-2073 52 MAR06
FT RATING
With factory installed 246-7843 injectors
Replaced 249-0120,251-4595,
256-5322,264-6701

525/455 HP 1650 LB-FT 2100 RPM KCB00508-6862 291-2077 88 MAR06
FT RATING
With factory installed 249-0697 injectors
Replaced 256-5320,264-6703

525/455 HP 1650/1550 LB-FT 2100 RPM MT KCB6812- UP 318-9504 97 AUG07
FT RATING
(Only compatible with 259-8418 or 10R2878 turbo installed)
RFT Injectors
Replaced 259-8899,262-4543,265-9580,
272-3132,291-2049,303-8748,307-1472
*****************************************************************************
335 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8821 75 Apr09
RFT Injectors
Replaced 258-7345,262-4518,265-9556,
272-3110,291-2024,295-1515,303-8722,307-1446,318-9476
335-7791,341-1475

380 HP 1400 LB-FT 2100 RPM KCB5434-UP 335-7792 76 AUG08
RFT injectors
Replaced 258-7346,262-4519,265-9557,
272-3111,291-2025,295-1516,303-8723,307-1447,318-9477

380 HP 1450 LB-FT 2100 RPM KCB5434-UP 335-7793 71 AUG08
With factory installed 249-0708 injectors
Replaced 258-7347,262-4520,265-9558,
271-2865,272-3112,291-2026,295-1517,
303-8724,307-1448318-9478

380 HP 1450 LB-FT 2100 RPM KCB5434-UP 335-7794 90 AUG08
Inlet Air Shutoff RFT Injectors
Replaced 258-7348,262-4521,265-9559,272-3113,
291-2027,295-1518,303-8725,307-1449,318-9479

410 HP 1450 LB-FT 2100 RPM KCB5434-UP 346-8822 72 Apr09
RFT injectors
Replaced 258-7349,262-4522,265-9560,
271-2866,272-3114,291-2028,295-1519,
303-8726,307-1450,318-9480,3357795,341-1479

410 HP 1450/1650LB-FT 2100 RPM KCB5434-UP 346-8825 81 Apr09
RFT injectors
Gear Fast/Run Slow (For Eaton Top 2)
Replaced 258-7350,262-4523,265-9562,272-3116,
291-2029,295-1554,303-8727,307-1451,318-9481,
335-7796,341-1480

410 HP 1450/1650LB-FT M/T 2100 RPM KCB5434-UP 346-8826 82 Apr09
RFT injectors
Replaced 258-7351,262-4525,265-9563,272-3117,
291-2030,295-1522,303-8729,307-1453,318-9483
335-7798,341-1482

410 HP 1450/1550LB-FT M/T 2100 RPM KCB5434-UP 346-8824 84 Apr09
RFT injectors
OWS
Replaced 258-7352,262-4526,265-9564,272-3118,
291-2031,295-1523,303-8730,307-1454,318-9484,
335-7799,341-1483

410 HP 1450/1550LB-FT M/T 2100 RPM KCB5434-UP 346-8823 98 Apr09
RFT injectors
Replaced 262-4524,265-9561,
272-3115,291-2074,295-1521,302-5726,
303-8728,307-1452,318-9482,335-7797,341-1148

410 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8827 77 Apr09
RFT injectors
Replaced 251-5692,258-7353
262-4527,265-9565,272-3119,
291-2032,295-1524,303-8731,307-1455,318-9485,
335-7800,341-1484

410 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8828 78 Apr09
RFT injectors
Inlet Air Shutoff
Replaced 258-7354
262-4528,265-9566,272-3120,291-2033,
295-1525,303-8732,307-1456,318-9486,
335-7801,341-1485

430 HP 1650 LB-FT 2100 RPM KCB5434-UP 346-8833 73 Apr09
With factory installed 249-0708 injectors
Replaced 258-7359,262-4533,265-9571,
272-3125,291-2038,295-1530,303-8737,307-1461,318-9491,
335-7807, 341-1490

430 HP 1550/1750LB-FT 2100 RPM KCB5434-UP 346-8831 74 Apr09
With factory installed 249-0708 injectors
(Eaton GFRS)
Replaced 258-7357,262-4531,265-9569,272-3123,
291-2036,295-1528,303-8735,307-1459,318-9489
335-7805,341-1488

430 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8829 79 Apr09
With factory installed 249-0708 injectors
Replaced 258-7355,262-4529,265-9567,
271-4488,272-3121,291-2034,295-1526,
303-8733,307-1457,318-9487,335-7802,
341-1486

430 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8830 89 Apr09
Inlet Air Shutoff RFT Injectors
Replaced 258-7356,262-4530,265-9568,272-3122,
291-2035,295-1527,303-8734,307-1458,318-9488,
335-7804,341-1487

430 HP 1650 LB-FT IAS 2100 RPM KCB5434-UP 346-8834 80 Apr09
Inlet Air Shutoff
With factory installed 249-0708 injectors
Replaced 258-7360,262-4534,265-9572,
272-3126,291-2039,295-1531,303-8738,307-1462,318-9492,
335-7808,341-1491

430 HP 1550/1750LB-FT MT 2100 RPM KCB5434-UP 346-8832 83 Apr09
With factory installed 249-0708 injectors
Replaced 258-7358,262-4532,265-9570,
272-3124,291-2037,295-1529,303-8736,307-1460,318-9490,
335-7806,341-1489

455/485HP 1550/1650LB-FT 2100 RPM KCB5434-UP 345-2372 70 May09
M/T Fire Truck
RFT injectors
Replaced 265-3168,265-9578,272-3130,
291-2043,295-1535,303-8742,307-1466,318-9496,335-7812,
341-1495

470 HP 1550 LB-FT 2100 RPM KCB5434-UP 346-8835 91 Apr09
RFT injectors
Replaced 254-1626,258-7361
262-4535,265-9573,272-3127,
291-2040,295-1532,303-8739,307-1463,318-9493,
335-7809,341-1492

470 HP 1650LB-FT 2100 RPM KCB5434-UP 346-8837 94 Apr09
RFT injectors
Replaced 262-4538,265-9575,272-3129,
291-2042,295-1534,303-8741,307-1465,318-9495,
335-7811,341-1494

470 HP 1550/1650LB-FT M/T 2100 RPM KCB5434-UP 346-8836 99 Apr09
RFT injectors
Replaced 262-9713,265-9574,272-3128,
291-2041,295-1533,303-8740,307-1464,318-9494,
335-7810,341-1493
***************************************************************************
C13 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
EURO Rating for use in Europe only – not for North America use
***************************************************************************
380 HP 2100 RPM MT-283 KW-EURO3 335-7813 66 AUG08
Replaced 273-8798,291-2044,
295-1536,303-8743,307-1467,318-9497

430 HP 2100 RPM MT-321 KW-EURO3 335-7814 67 AUG08
Replaced 273-8799,291-2045,
295-1537,303-8744,307-1468,318-9498

470 HP 2100 RPM MT-350 KW-EURO3 335-7815 68 AUG08
Replaced 273-8800,291-2046,
295-1538,303-8745,307-1469,318-9499

500 HP 2100 RPM MT-373 KW-EURO3 291-2047 69 MAR06
Replaced N/A

380 HP 2100 RPM 283 KW-EURO3 AISO 335-7816 202 AUG08
Replaced 308-3512,318-9500

430 HP 2100 RPM 321 KW-EURO3 AISO 335-7817 203 AUG08
Replaced 308-3514,318-9501

470 HP 2100 RPM 350 KW-EURO3 AISO 335-7818 204 AUG08
Replaced 308-3516,318-9502

***************************************************************************
C13 GOV FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED FILE CODE DATE
2007 EMISSIONS EURO4 TRUCK
***************************************************************************
380 HP@2100/2300 RPM EURO4 S3C00001-UP 330-2021 35/135 JUN08
Replaced 295-6886,319-4910

430 HP@2100/2300 RPM EURO4 SC300001-UP 330-2022 36/136 JUN08
Replaced 295-6887,319-4911

470 HP@2100/2300 RPM EURO4 SC300001-UP 330-2023 37/137 JUN08
Replaced 295-6888,319-4912
***************************************************************************
C13 GOV FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED FILE CODE DATE
2007 EMISSIONS ADEM A4 ECM ON HD ACERT HIGHWAY TRUCK
***************************************************************************

305 HP 1150 LB-FT 2100/2300 RPM LEE00001-UP 365-1126 40/140 Nov10
Replaced 311-6968,312-1397,314-3431,
316-1760,318-7028,320-0292,326-3606,
327-4486,333-5970,337-7326,343-5712,
348-4710

335 HP 1250 LB-FT 2100/2300 RPM LEE00001-UP 318-7029 41 SEP07
Replaced 311-6987,312-1398,314-3432,
316-1769

335 HP 1250 LB-FT 2100/2300 RPM LEE00001-UP 365-1127 42/142 Nov10
Replaced 314-3433,316-1762,318-7030,
320-0294,326-3607,327-4487,333-5971,
337-7327,343-5713,348-4711

350 HP 1350 LB-FT 2100/2300 RPM LEE00001-UP 365-1128 43/143 Nov10
Replaced 311-6989,312-1400,314-3434,
316-1763,318-7031,320-0295,326-3608,
327-4488,333-5972,337-7328,343-5714,
348-4712

350 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1129 45/145 Nov10
Replaced 311-6990,312-1401,314-3435,
316-1764,318-7032,320-0296,326-3609,
327-4489,333-5973,337-7329,343-5715,
348-4713

350 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1130 46/146 Nov10
Oil Well Sevice
Replaced 314-3436,316-1765,318-7033,
320-0297,326-3610,327-4490,333-5974,
337-7330,343-5716,348-4714

350 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 365-1131 47/147 Nov10
Replaced 311-6992,312-1403,314-3437,
316-1766,318-7034,320-0298,326-3611,
327-4491,333-5975,337-7331,343-5717,
348-4715

370 HP 1350 LB-FT 2100/2300 RPM LEE00001-UP 365-1132 48/148 Nov10
Replaced 311-6993,312-1404,314-3438,
316-1767,318-7035,320-0299,326-3612,
327-4492,333-5976,337-7332,343-5718,
348-4716

370 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1133 49/149 Nov10
Replaced 311-6994,312-1405,314-3439,
316-1768,318-7036,320-0300,326-3613,
327-4493,333-5977,337-7333,343-5719,
348-4717

380 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1135 67/167 Nov10
Supports Optional Pre-cooler
Replaced 314-3441,316-1770,318-7038,
320-0302,326-3615,327-4495,333-5979,
337-7335,343-5721,348-4719

380 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1136 52/152 Nov10
Replaced 311-6996,312-1407,314-3442,
316-1771,318-7039,320-0303,326-3616,
327-4496,333-5980,337-7336,343-5722,
348-4720

410 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1137 68/168 Nov10
Supports Optional Pre-cooler
Replaced 314-3443,316-1772,318-7040,
320-0304,326-3617,327-4497,333-5981,
337-7337,343-5723,348-4721

410 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 337-7334 50/150 Nov10
Replaced 311-6995,312-1406,314-3440,
316-1769,318-7037,320-0301,326-3614,
327-4494,333-5978,337-7334,

410 HP 1450 LB-FT 2100/2300 RPM LEE00001-UP 365-1138 53/153 Nov10
Replaced 311-6997,312-1408,314-3444,
316-1733,318-7041,320-0305,326-3618,
327-4498,333-5982,337-7338,343-5724,
348-4722

410HP 1450/1550 LB-FT 2100/2300 RPM LEE00001-UP 365-1139 69/169 Nov10
Supports Optional Pre-cooler
Multi-torque
Replaced 314-3445,316-1774,318-7042,
320-0306,326-3619,327-4499,333-5983,
337-7339,343-5725,348-4723

410HP 1450/1550 LB-FT 2100/2300 RPM LEE00001-UP 365-1140 54/154 Nov10
Multi-torque
Replaced 311-6998,312-1409,314-3446,
316-1775,318-7043,320-0307,326-3620,
327-4500,333-5984,337-7340,343-5726,
348-4724

410 HP 1450/1650 LB-FT 2100/2300 RPM LEE00001-UP 337-7341 70/170 OCT08
Multi-torque
Replaced 314-3447,316-1776,318-7044,
320-0308,326-3621,327-4501,333-5985

410 HP 1450/1650 LB-FT 2100/2300 RPM LEE00001-UP 337-7342 55/155 OCT08
Multi-torque
Replaced 311-6999,312-1410,314-3448,
316-1777,318-7045,320-0309,326-3622,
327-4502,333-5986

410 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 337-7343 71/171 OCT08
Supports Optional Pre-cooler
Replaced 314-3449,316-1778,318-7046,
320-0310,326-3623,327-4503,333-5987

410 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 337-7344 56/156 OCT08
Replaced 311-7000,312-1411,314-3450,
316-1779,318-7047,320-0311,326-3624,
327-4504,333-5988

430 HP 1550/1750 LB-FT 2100/2300 RPM LEE00001-UP 337-7346 58/158 OCT08
GFRS
Replaced 311-7002,312-1413,314-3452,
316-1781,318-7049,320-0314,326-3626,
327-4506,333-5990

430 HP 1550/1750 LB-FT 2100/2300 RPM LEE00001-UP 337-7347 59/159 OCT08
Multi-torque
Replaced 311-7003,312-1414,314-3452,
316-1782,318-7050,320-0315,326-3627,
327-4507,333-5991

430 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 337-7345 57/157 OCT08
Replaced 311-7001,312-1412,314-3451,
316-1780,318-7048,320-0313,326-3625,
327-4505,333-5989

430 HP 1650 LB-FT 2100/2300 RPM LEE00001-UP 337-7349 60/160 OCT08
Replaced 311-7004,312-1415,314-3454,
316-1784,318-7052,320-0317,326-3629,
327-4509,333-5993

470 HP 1550 LB-FT 2100/2300 RPM LEE00001-UP 337-7350 61/161 OCT08
Replaced 311-7005,312-1416,314-3455,
316-1785,318-7053,320-0318,326-3630,
327-4510,333-5994

470 HP 1650 LB-FT 2100/2300 RPM LEE00001-UP 337-7351 62/162 OCT08
Multi-torque
Replaced 311-70063,12-1417,314-3456,
316-1786,318-7054,320-0319,326-3631,
327-4511,333-5995

470 HP 1650 LB-FT 2100/2300 RPM LEE00001-UP 337-7352 63/163 OCT08
Replaced 312-1418,314-3457,316-1787,
318-7055,320-0320,326-3632,327-4512,
333-5996

455 HP 1550 LB-FT 2100 RPM LEE00001-UP 337-7353 64/164 OCT08
485 HP 1650 LB-FT
Replaced 312-1419,314-3458,316-1788,
318-7056,320-0321,326-3633,327-4413,
333-5997

525 HP 1750 LB-FT 2100 RPM LEE00001-UP 337-7354 65/165 OCT08
RV
Replaced 312-1420,314-3459,315-5890,
316-1789,318-7057,320-0322,326-3634,
327-4514,333-5998

525 HP 1750 LB-FT 2100 RPM LEE00001-UP 337-7355 66/166 OCT08
Replaced 312-1421,314-3460,316-1790,
318-7058,320-0323,326-3635,327-4515,
333-5999

***************************************************************************
C15 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
**************************************************************************
435 HP 1650 LB-FT 2100 RPM BXS00001-02034 242-1857 34 AUG03
Replaced 241-8405

435 HP 1650 LB-FT 2100 RPM BXS2035 -up 305-4511 40 NOV06
Replaced 245-0197, 247-7543,
249-7619,253-6066,255-4933,
262-3727,271-2954,283-5127,291-2083

435 HP 1550/1750 LB-FT M/T 2100 RPM BXS00001-02034 242-1856 32 AUG03
Gear Fast/Run Slow (EATON 2)
Replaced 237-9213,241-8409

435 HP 1550/1750 LB-FT M/T 2100 RPM BXS2035-up 305-4508 44 NOV06
Gear Fast/Run Slow (Eaton 2)
Replaced 245-0189,247-7541,
249-7617,253-6070,255-4931,
262-3724,271-2951,283-5124,291-2080

435 HP 1550/1750 LB-FT M/T 2100 RPM BXS00001-02034 244-2510 31 AUG03

435 HP 1550/1750 LB-FT 2100 RPM BXS02035-up 290-2167 20 FEB06
Gear Fast/Run Slow
2004 Iron ADEM 4 ECM only
Replaced 253-0038,261-6686,
264-7702,271-1372,283-1179

435 HP 1550/1650 LB-FT M/T 2100 RPM BXS2035-up 305-4507 60 NOV06
Replaced 258-6910,262-3723,
271-2950,283-5123,291-2079

435 HP 1550/1750 LB-FT M/T 2100 RPM BXS2035-up 305-4509 45 NOV06
Replaced 245-0181,245-0212,
249-7626,253-6071,255-4932,
262-3725,271-2952,283-5125,291-2081

435 HP 1550 LB-FT 2100 RPM BXS2035-up 305-4506 48 NOV06
Replaced 245-0195,247-7544,
249-7620,253-6074,255-4930,262-3722,
271-2949,283-5122,291-2078

435/500HP 1550/1650 LB-FT M/T 2100 RPM BXS02035-up 305-4510 54 NOV06
Oil Well Service (OWS)
Replaced 249-2489,255-1267,
262-3726,271-2953,283-5126,291-2082

475 HP 1650 LB-FT 2100 RPM BXS00001-02034 242-1858 35 AUG03
Replaced 239-5256,241-8406

475 HP 1650 LB-FT 2100 RPM BXS2035-up 305-4512 41 NOV06
Replaced 245-0183,247-7538,
249-7614,253-6067,255-4934,
262-3728,271-2955,283-5128,291-2084

475 HP 1650 LB-FT 2100 RPM BXS2035-up 305-4513 50 NOV06
Brakesaver
Replaced 245-0201,249-7622,
253-6076,255-4935,262-3729,
271-2956,283-5129,291-2085

475 HP 1650/1850 LB-FT M/T 2100 RPM BXS2035-up 305-4515 47 NOV06
Replaced 245-0193,245-0213,
249-7869,253-6073,255-4937,
262-3731,271-2958,283-5131,291-2087

475 HP 1650/1850 LB-FT M/T 2100 RPM BXS2035-up 305-4514 46 NOV06
Gear Fast/Run Slow (Eaton 2)
Replaced 245-0191,247-7542,
249-7618,253-6072,255-4936,
262-3730,271-2957,283-5130,291-2086

475 HP 1850 LB-FT 2100 RPM BXS00001-02034 242-1859 36 AUG03
Replaced 239-5257,241-8407

475 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4516 42 NOV06
Replaced 245-0185,247-7539,
249-7615,253-6068,255-4938,
262-3732,271-2959,283-5132,291-2088

475 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4517 51 NOV06
Brakesaver
Replaced 245-0203,249-7623,
253-6077,255-4939,262-3733,
271-2960,283-5133,291-2089

500 HP 1650 LB-FT 2100 RPM BXS02035-up 305-4518 55 NOV06
Replaced 249-2490,262-3734,
271-2961,283-4134,291-2090

500 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4519 49 NOV06
Replaced 245-0199,247-7545,
249-7621,253-6075,255-4940,
262-3735,271-2962,283-5135,291-2091

500 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4520 52 NOV06
Brakesaver
Replaced 245-0205,249-7624,
253-6078,255-4941,262-3736,
271-2963,283-5136,291-2092

500 HP 1850 LB-FT 2300 RPM BXS2035-up 305-4521 56 NOV06
Replaced 249-2491,255-1269,
262-3737,271-2964,283-5137,291-2093

550 HP 1850 LB-FT 2100 PRM BXS00001-02034 242-1860 37 AUG03
Replaced 239-5258,241-8408

550 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4522 43 NOV06
Replaced 245-0187,247-7540,
249-7616,253-6069,255-4942,
262-3738,271-2965,283-5138,291-2094

550 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4523 53 NOV06
Brakesaver
Replaced 245-0207,249-7625,
253-6079,255-4943,262-3739,
271-2966,283-5139,291-2095

550 HP 1850 LB-FT 2300 RPM BXS2035-up 305-4524 57 MAR06
Replaced 249-2492,255-1270,
262-3740,271-2967,283-5140,291-4347
***************************************************************************
***************************************************************************
C15 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
****************************************************************************
HEAVY HAUL RATINGS
Please note the heavy haul production files are an enhancement for specific
heavy load applications. The files were not created to correct a problem with
engine performance in heavy haul applications. Previous heavy haul software
meets all specifications pertaining to performance. This software is basically
an improvement that may augment performance, engine response and fuel economy
if utilized correctly. The most effective improvement is driver training.

475 HP 1650 LB-FT 2100 RPM BXS2035-up 305-4525 61 NOV06
Replaced 288-8535,297-2417
Replaces BXS 291-2084/PM code 41 for use in Heavy Haul applications only

475 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4526 62 NOV06
Replaced 288-8536,297-2418
Replaces BXS 291-2088/PM code 42 for use in Heavy Haul applications only

550 HP 1850 LB-FT 2100 RPM BXS2035-up 305-4527 63 NOV06
Replaced 288-8537,297-2419
Replaces BXS 291-2094/PM code 43 for use in Heavy Haul applications only

435 HP 1550/1750 LB-FT 2100 RPM MXS00001-UP 329-8536 21 APR08
NXS00001-UP
Replaced 258-8359,264-7703,
271-1374,283-1181,290-2169,308-1278

435 HP 1550/1650 LB-FT M/T 2100 RPM MXS00001-up 329-8533 43 APR08
NXS00001-UP
Replaced 269-2109,271-1373,283-1180,
290-2168,308-1275

435/550HP 1550/1850 LB-FT 2100 RPM MXS00001-UP 308-1307 46 FEB07
NXS00001-UP
Multi-torque Oil Well Service Only
Replaced 277-3087

435 HP 1650 LB-FT 2100 RPM MXS00001-UP 329-8537 22 APR08
NXS00001-UP
Replaced 258-8360,264-0065,
264-7701,271-1371,283-1178,
290-2166,308-1279,312-5637

435/500HP 1550/1650 LB-FT 2100 RPM MXS00001-UP 329-8534 23 APR08
NXS00001-UP
Multi-torque Oil Well Service Only
Replaced 258-8361,264-7704,
271-1375,283-1182,290-2170,
296-6023,308-1276

435 HP 1550/1750 LB-FT 2100 RPM MXS00001-UP 329-8535 7 APR08
Gear Fast/Run Slow (Eaton 2) NXS00001-UP
Replaced 253-0058,261-6686,
264-7702,283-1179,290-2167,308-1277

475 HP 1650 LB-FT 2100/2300 RPM MXS00001-UP 329-8566 47 APR08
Multi-torque NXS00001-UP
Replaced 277-3088,308-1308

475 HP 1850 LB-FT 2100/2300 RPM MXS00001-UP 329-8567 48 APR08
Multi-torque NXS00001-UP
Replaced 277-3089,308-1309

475 HP 1650 LB-FT 2100 RPM MXS00001-UP 329-8538 24 APR08
NXS00001-UP
Replaced 258-8362,264-7705,
271-1376,283-1183,290-2171,
295-6068,308-1280,312-5638

475 HP 1650 LB-FT 2100 RPM MXS00001-UP 329-8539 25 APR08
Brakesaver NXS00001-UP
Replaced 271-1377,283-1184,
290-2172,295-6069,308-1281

475 HP 1650/1850 LB-FT 2100 RPM MXS00001-UP 329-8540 26 APR08
Gear Fast/Run Slow (Eaton 2) NXS00001-UP
Replaced 258-8364,264-0066,264-7709,
271-1380,283-1187,289-1281,290-2175,
292-6962,301-4633,308-1282

475 HP 1650/1850 LB-FT 2100 RPM MXS00001-UP 329-8541 27 APR08
Multi-torque NXS00001-UP
Replaced 258-8365,264-0067,
264-7710,271-1381,283-1188,
289-1282,290-2176,292-6963,
301-4634,308-1283

475 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8542 28 APR08
NXS00001-UP
Replaced 258-8366,264-0068,
264-7707,271-1378,283-1185,
290-2173,292-6960,301-4631,308-1284

475 HP 1850 LB-FT 2100/2300 RPM MXS00001-UP 329-8543 29 APR08
Brakesaver NXS00001-UP
Replaced 258-8367,264-7708,
271-1379,283-1186,289-1280,
290-2174,292-6961,301-4632,308-1285

500 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8545 30 APR08
NXS00001-UP
Replaced 258-8368,264-7711,
271-1382,283-1189,290-2177,308-1287

500 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8546 31 APR08
Brakesaver NXS00001-UP
Replaced 258-8369,264-7712,
271-1383,283-1190,290-2178,308-1288

550 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8549 32 APR08
NXS00001-UP
Replaced 258-8370,264-7713,
271-1384,283-1191,290-2179,
308-1291,312-5639

550 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8550 33 APR08
Brakesaver NXS00001-UP
Replaced 258-8371,264-7714,
271-1385,283-1192,290-2180,308-1292
**************************************************************************
Lower rated engines can not be uprated to 600/625 HP rating
**************************************************************************
600 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8553 9 APR08
NXS00001-UP
Replaced 256-1368,261-6687,264-7715,
269-0982,271-1386,283-1193,290-2181,
302-8942,307-2259,308-1295

600 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8554 10 APR08
Brakesaver NXS00001-UP
Replaced 261-6688,264-7716,269-0983,
271-1387,283-1194,290-2182,308-1296

600 HP 1850 LB-FT 2300 RPM MXS00001-UP 323-5866 44 NOV07
MT Military LVSR NXS00001-UP
Replaced 291-0106

625 HP 2050 LB-FT 2100 RPM MXS00001-UP 329-8557 6 APR08
NXS00001-UP
Replaced 253-0037,261-6689,
264-7717,269-0984,271-1388,
283-1195,290-2183,308-1299,312-5640

625 HP 2050 LB-FT 2100 RPM MXS00001-UP 329-8558 8 APR08
Brakesaver NXS00001-UP
Replaced 261-6690,264-7718,
269-0985,271-1389,283-1196,
290-2184,308-1300
**************************************************************************
UPRATE
**************************************************************************
500 HP 1650 LB-FT 2100 RPM MXS00001-UP 308-1286 34 FEB07
UPRATE ONLY NXS00001-UP
Replaced 263-2858,271-1390,
283-1197,290-2185

500 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8547 35 APR08
UPRATE ONLY NXS00001-UP
Replaced 263-2859,271-1391,
283-1198,290-2186,308-1289

500 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8548 36 APR08
NXS00001-UP
BRAKESAVER/UPRATE ONLY
Replaced 263-2860,271-1392,
283-1199,290-2187,308-1290

550 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8551 37 APR08
UPRATE ONLY NXS00001-UP
Replaced 263-2861,271-1393,
283-1200,290-2188,308-1293

550 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8552 38 APR08
BRAKESAVER/UPRATE ONLY NXS00001-UP
Replaced 263-2862,271-1394,
283-1201,290-2189,308-1294

**************************************************************************
Lower rated engines can not be uprated to 600/625 HP rating
**************************************************************************

600 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8555 39 APR08
UPRATE ONLY NXS00001-UP
Replaced 263-2863,271-1395,
283-1202,290-2190,308-1297

600 HP 1850 LB-FT 2300 RPM MXS00001-UP 329-8556 40 APR08
UPRATE ONLY NXS00001-UP
BRAKESAVER ONLY
Replaced 263-2864,271-1396,
283-1203,290-2191,308-1298

625 HP 2050 LB-FT 2300 RPM MXS00001-UP 329-8559 41 APR08
UPRATE ONLY NXS00001-UP
Replaced 263-2865,271-1397,
283-1204,290-2192,308-1301

625 HP 2050 LB-FT 2300 RPM MXS00001-UP 329-8560 42 APR08
UPRATE ONLY NXS00001-UP
BRAKESAVER ONLY
Replaced 263-2866,271-1398,283-1205,290-2193,308-1302

***************************************************************************
***************************************************************************
C15 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
**************************************************************************
HEAVY HAUL RATINGS
Please note the heavy haul production files are an enhancement for specific heavy load applications.
The files were not created to correct a problem with engine performance in heavy haul applications.
Previous heavy haul software meets all specifications pertaining to performance.
This software is basically an improvement that may augment performance, engine response
and fuel economy if utilized correctly. The most effective improvement is driver training.

475 HP 1650 LB-FT 2100 RPM MXS00001-UP 329-8561 50 APR08
NXS00001-UP
Replaced 288–8538,291-2013,308-1303
Replaces MXS 290-2171/PM code 24 for use in Heavy Haul applications only

475 HP 1850 LB-FT 2100 RPM MXS00001-UP 329-8562 51 APR08
NXS00001-UP
Replaced 288-8539,291-2014,308-1304
Replaces MXS 290-2173/PM code 28 for use in Heavy Haul applications only

550 HP 1850 LB-FT 2100 RPM MXS00001-UP 308-1305 52 JAN07
NXS00001-UP
Replaced 288-8540,291-2015
Replaces MXS 290-2179/PM code 32 for use in Heavy Haul applications only

*****************************************************************************
*****************************************************************************
C15 GOV FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED FILE CODE DATE
2007 EMISSIONS ADEM A4 ECM ON HEAVY DUTY ACERT HIGHWAY TRUCK
*****************************************************************************
435 HP 1550 LB-FT 2100/2300 RPM SDP00001-UP 365-1160 40/140 Nov10
Replaced 310-8351,311-6957,314-2915,
316-1845,318-6991,320-0362,326-3651,
327-4519,333-5944,334-1287,343-5744,
348-4745

435 HP 1650 LB-FT 2100/2300 RPM SDP00001-UP 365-1161 41/141 Nov10
Replaced 310-8352,311-6958,314-2916,
316-1846,318-6992,320-0363,326-3652,
327-4520,333-5945,334-1288,343-5745,
348-4746

435HP 1550/1750 LB-FT 2100/2300 RPM SDP00001-UP 365-1162 42/142 Nov10
Multi-torque/GFRSS
Replaced 309-1779,310-8353,311-6959,
314-2917,316-1847,318-6993,320-0364,
326-3653,327-4521,333-5946,334-1289,
343-5746,348-4747

435HP 1550/1650 LB-FT 2100/2300 RPM SDP00001-UP 365-1163 43/143 Nov10
Multi-torque
Replaced 310-8354,311-6960,314-2918,
316-1848,318-6994,320-0365,326-3654,
327-4522,333-5947,334-1290,343-5747,
348-4748

435HP 1550/1750 LB-FT 2100/2300 RPM SDP00001-UP 365-1164 44/144 Nov10
Multi-torque
Replaced 310-8355,311-6961,314-2919,
316-1849,318-6995,320-0366,326-3655,
327-4523,333-5948,334-1291,343-5748,
348-4749

435HP 1550/1650 LB-FT 2100/2300 RPM SDP00001-UP 365-1165 45/145 Nov10
Multi-torque/OWS
Replaced 310-8356,311-6962,314-2920,
316-1850,318-1924,318-6996,320-0367,
326-3656,327-4524,333-5949,334-1292,
343-5749,348-4750

475 HP 1650 LB-FT 2100/2300 RPM SDP00001-UP 365-1166 46/146 Nov10
Replaced 310-8357,311-6963,314-2921,
316-1851,318-6997,320-0368,326-3657,
327-4525,333-5950,334-1293,343-5750,
348-4751

475HP 1650/1750 LB-FT 2100/2300 RPM SDP00001-UP 365-1168 48/148 Nov10
Multi-torque
Replaced 310-8359,311-6965,314-2923,
316-1853,318-6999,320-0370,326-3659,
327-4527,333-5952,334-1295,343-5752,
348-4753

475 HP 1850 LB-FT 2100/2300 RPM SDP00001-UP 365-1169 49/149 Nov10
Replaced 310-8360,311-6966,314-2924,
316-1854,318-7000,320-0371,326-3660,
327-4528,333-5953,334-1296,343-5753,
348-4754

475HP 1650/1850 LB-FT 2100/2300 RPM SDP00001-UP 365-1171 51/151 Nov10
Multi-torque/GFRSS
Replaced 310-8362,311-6968,314-2926,
316-1856,318-7002,320-0373,326-3662,
327-4530,333-5955,334-1298,343-5755,
348-4756

475HP 1650/1850 LB-FT 2100/2300 RPM SDP00001-UP 365-1172 52/152 Nov10
Multi-torque
Replaced 310-8363,311-6969,314-2927,
316-1857,318-7003,320-0374,326-3663,
327-4531,333-5956,334-1299,343-5756,
348-4757

500 HP 1850 LB-FT 2100/2300 RPM SDP00001-UP 365-1174 54/154 Nov10
Replaced 310-8365,311-6971,314-2929,
316-1859,318-7005,320-0376,326-3665,
327-4533,333-5958,334-1301,343-5758,
348-4759

550 HP 1850 LB-FT 2100/2300 RPM SDP00001-UP 365-1175 55/155 Nov10
Replaced 310-8366,311-6972,314-2930,
316-1860,318-7006,320-0377,326-3666,
327-4534,333-5959,334-1302,343-5759,
348-4760
**************************************************************************
Lower rated engines can not be uprated to 600/625 HP rating
***************************************************************************
600 HP 1850 LB-FT 2100 RPM SDP00001-UP 365-1177 57/157 Nov10
Replaced 311-6974,314-2932,316-1862,
318-7008,320-0379,326-3668,327-4536,
333-5961,334-1304,343-5761,348-4762

600 HP 1850 LB-FT ARF 2100 RPM SDP00001-UP 365-1178 58/158 Nov10
Replaced 318-7009,320-0380,326-3669,
327-4537,333-5962,334-1305,343-5762,
348-4763

600 HP 1850 LB-FT (RV) 2100 RPM SDP00001-UP 365-1179 59/159 Nov10
Replaced 311-6976,314-2934,315-5873,
316-1864,318-7010,320-0381,326-3670,
327-4538,333-5963,334-1306,343-5763,
348-4764

600 HP 2050 LB-FT 2100 RPM SDP00001-UP 365-1180 60/160 Nov10
Replaced 311-6977,314-2935,316-1865,
318-7011,320-0382,326-3671,327-4539,
333-5964,334-1307,343-5764,348-4765

600 HP 2050 LB-FT (RV) 2100 RPM SDP00001-UP 365-1181 62/162 Nov10
Replaced 311-6979,314-2937,315-5874,
316-1867,318-7013,320-0384,326-3672,
327-4540,333-5965,334-1308,343-5765,
348-4766

625 HP 2150 LB-FT 2100 RPM SDP00001-UP 365-1182 63/163 Nov10
Replaced 310-8374,311-6980,314-2938,
316-1868,318-7014,320-0385,326-3673,
327-4541,333-5966,334-1309,343-5766,
348-4767

625 HP 2050 LB-FT (RV) 2100 RPM SDP00001-UP 365-1183 65/165 Nov10
Replaced 311-6982,314-2940,315-5875,
316-1870,318-7016,320-0387,326-3674,
327-4542,333-5967,334-1310,343-5767,
348-4768

625 HP 1900 LB-FT 2100 RPM SDP00001-UP 365-1184 66/166 Nov10
Replaced 311-6983,314-2941,315-5876,
316-1871,318-7017,320-0388,326-3675,
327-4543,333-5968,334-1311,343-5768,
348-4769
***************************************************************************
C15 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
EURO 4 Rating for use in Europe only – not for North America use
***************************************************************************
500 HP@2100/2300 RPM EURO4 348-6571 35/135 Jun09
Multi-torque
Replaced 295-6883,319-4913,330-2024,
335-6771

550 HP@2100/2300 RPM EURO4 348-6572 36/136 Jun09
Replaced 295-6884,319-4914,330-2025,
335-6772

625 HP@2100/2300 RPM EURO4 348-6573 37/137 Jun09
Replaced 295-6885,319-4915,330-2026,
335-6773
***************************************************************************
C15 GOV SERIAL NO. FLASH P/M RELEASE
HORSEPOWER TORQUE SPEED RANGE FILE CODE DATE
****************************************************************************
HEAVY HAUL RATINGS
Please note the heavy haul production files are an enhancement for specific
heavy load applications. The files were not created to correct a problem with
engine performance in heavy haul applications. Previous heavy haul software
meets all specifications pertaining to performance. This software is basically
an improvement that may augment performance, engine response and fuel economy
if utilized correctly. The most effective improvement is driver training.

475 HP 1650 LB-FT 2300 RPM SDP1-up 365-1167 47/147 Nov10
Replaced 314-2922,316-1852,318-6998,
320-0369,326-3658,327-4526,333-5951,
334-1294,343-5751,348-4752
For use in Heavy Haul applications only

475 HP 1850 LB-FT 2300 RPM SDP1-up 365-1170 50/150 Nov10
Replaced 314-2925,316-1855,318-7001,
320-0372,326-3661,327-4529,333-5954,
334-1297,343-5754,348-4755
For use in Heavy Haul applications only

550 HP 1850 LB-FT 2300 RPM SDP1-up 365-1176 56/156 Nov10
Replaced 314-2931,316-1861,318-7007,
320-0378,326-3667,327-4535,333-5960,
334-1303,343-5760,348-4761
For use in Heavy Haul applications only
================================================================================
Flash File 158-1275
158-1275 is the current powertrain (steering and transmission)
control software for D10R, AND D11R track type tractors. See
service magazine articles for further information or contact Ross
Williams at (309) 675-9675.
================================================================================
PRODUCT: UPS Series 300

DATE OF RELEASE: November 4, 2002

SUBJECT: UPS 2.45 FIRMWARE UPDATE

BRIEF DESCRIPTION:
Firmware, 2.45, has been released for CAT UPS 250, 300, 500, 600, 750 and 900 Series Product.

THE CURRENT UPS 300 SERIES PRODUCT REQUIRES PERIODIC ENGINEERING UPGRADES
TO THE SYSTEM FIRMWARE. THESE UPGRADES ARE ESSENTIAL IN MAINTAINING THE
PERFORMANCE REQUIREMENTS OF THE MACHINE. THE UPGRADES MAY ALSO
INCORPORATE OPERATIONAL ENHANCEMENT FEATURES.

If the 201-2187 Controller (APS), the 201-2189 Board Assembly (PCC), or the 229-8307 Board
Assembly (ZZC) are replaced in a UPS system, All UPS modules within the line-up must have their
Firmware updated.

For reference, instructions regarding the firmware updating procedure can be found in:
RENR2476 (Systems Operation, Testing and Adjusting).

AFFECTED MODEL(S) AND SERIAL NUMBER(S):
Model Numbers Applicable Serial Number Prefix
UPS 250I APZ00225 and UP
UPS 250IE CNM00224 and UP
UPS 300 CNJ00176 and UP
UPS 300E CPZ00302 and UP
UPS 500 CSE00103 and UP
UPS 600 CTX00210 and UP
UPS 750 CPM00147 and UP
UPS 900 CRY00271 and UP
Expansion MMU CSY00192 and UP

FIRMWARE UPDATE HISTORY:
Rev. 2.45 Enhancements
– Removed the following operating parameters: Cast Iron Housings, Invert K1 K2 Status, No Buzzer Dialog, AVR
Seed, Start Volts: Warn Level, Discharge VAC Offset, and Frequency Track Window. AVR enable, AHC enable
and AHC gain were moved from the Neutral Connected group into the tuning parameters group since it is a more
logical location for them.
– Changed the modem Auto Answer number of rings to 3.
– Merged the functionality of Disable Auto Start and Disable Auto Load On operating parameters into a new operating
parameter called Auto Load and Start which will hopefully be less confusing.
– Added an Event Log message indication every time the Bypass contactor opens or closes.
– Using a version of the viewing software, a Ctrl-D (event log dump) will now also include information from Ctrl-N
(revision information) and Alt-Z (operating parameter settings) as well.
– The remote access jumper now has no effect on the remote output contacts.
– Upon reentry into discharge, added Event Log messages to report what caused it.
– Started using a generic boot monitor that is able to prevent UPS150 and Series 300 firmware clashes.
– Added Output PN Voltage Limit operating parameter.
– Added Load Cell Startup Lower Limit operating parameter.
– Added Load Cell Offset operating parameter.
– Added loss of lock reset capability to the Power PC to deal with the unlikely event of a phase lock loss causing the
PowerPC to potentially lock up.
– A trace address dump capability has been added to give the last 1024 addresses accessed by the PPC before it went
away.
– Added operating parameter called Stepped Phase Match to allow the unit to either ramp or step the phase in.
– A Ctrl-Z (dump set points) command is now allowed over modem.
– Added 4 remote input contacts for GSO status.
– Improved frequency slew limit operation by preventing the Phase-Locked Loop from making any instantaneous
frequency steps. This has the adverse affect of lengthening phase match timing, so a parameter (Stepped Phase
Match) was added for problematic installations to disable the improvement and use the old phase match. Also
corrected a bug causing phase matching to work at 2x the slew-rate setting.
– Added a timeout to detect if the PowerPC stops accessing memory for an extended period of time, and reset it if this
occurs. Also added a memory trace buffer.
– Phase-Neutral Over-voltage is now detected and will cause a shut-down of the UPS. This is intended to prevent any
possible failure of 4-wire circuitry from surging the output Phase-Neutral voltage.
– UPSNet was susceptible to losing communications on both networks in specific failure conditions. This has been
improved so that any single failure will not prevent proper communication. This is accomplished by the receive logic
only monitoring one network at a time. The network in use is selected based on bad packet rates of both networks
from each MMU.
– Implemented minimum on and off timers for the IGBT gating signals. This prevents any switching period smaller
than 6 micro-seconds from actually gating the IGBT modules. This is to avoid certain possible failure modes of the
gate driver boards.
– Removed support for MMU’s with a node ID greater than 4.

Rev. 2.45 Program Corrections
– Correct the occasional nuisance messages for MMU input current overloads at start or end of motoring.
– Correct the problem where the bypass unavailable LED would remain lit when bypass range checking was turned off.
– Correct a problem where the notice LED would get stuck on if both a notice and an alarm occurred and cleared
before they were acknowledged.
– Removed a program error where the discharge lockout would not work in certain states thus allowing discharge to
continue to occur.
– Added support for detecting an open static switch or fuse on phase C of the input.
– Correct a problem when the bypass static switch fuse failed on an SMS, K4 would open but, when the fuse failure
cleared it would not re-close.
– Changed the valid minimum for the CAN node ID from zero to one in order to prevent problems with the viewing
software not receiving telemetry correctly.
– Adjusted the tuning of the sharing controller to minimize inter-MMU power fluctuations during discharge on 50 Hz
Multi-Module systems.
– Added a timer to overlap the Line path with the Bypass during the transition to bypass following a deadline timeout
or memory access timeout. This guarantees a make-before-break transfer.
– Removed a program error where the engineering preheat workaround does not restart with the shorter duration if the
system is in RPS calibration.
– Ctrl-I no longer defaults the load cell offset operating parameter.
– Correct the problem where disabling overload warning messages would prevent the unit from ever clearing
an overload that timed out. The user would have to restart the APC or enable overload warning messages to
get it to clear.
– Correct the program to prevent the calibration factors from being corrupted on a nonstandard exit from
calibration (i.e. not saved or aborted).
– Increased the limit for a bypass frequency difference error from 0.1Hz to 0.5Hz to eliminate false errors.
– Made single display LEDs behave as system LEDs and have them remain lit when any MMU has a notice or
alarm.
– Correct the problem where the PPC would not tell the FPGA bypass was unavailable for 2 seconds after it
went into discharge if the bypass was available before going into discharge.
– Correct the program to allow the following condition to work only once if, the bypass range checking was
off and using the external sync.
– Correct the problem where if just the bypass input is powered On at startup, K3 could be forced open.

– During calibration of the field coils or hall probes the field coil temperatures would not cause an error and
shutdown. Corrected for condition to allow system reporting.
– Correct a problem where short discharges could sometimes cause the RMS task to be incomplete which,
would cause a MMU in a MMS to do an erroneous unannounced shutdown.
– Correct the problem when trying to do the new Load cell calibration after a three phase calibration (voltage
or current) a deadline timeout would occur.
– Correct a problem with Voltage Matching utilizing the On generator remote input contact.
– Correct the issue with slave MMUs not closing their static switches on extremely short walk-ins from the
discharge mode.
– Correct the problem introduced in 2.44 where an unbalanced load on the output of an SMS would prevent it
from coming online.

Rev. 2.45 Parameter Changes (Default Values)
This table contains the operating parameter changes (additions, deletions, changes in name/functionality or default) from
the table for 2.43 and 2.44 in the revision history below.

Number Parameter Default Value
10 Disable Auto Load On NA
19 Discharge VAC Offset NA
21 Auto Load and Start 1
56 Cast Iron Housings NA
59 Start Volts: Warn Level NA
60 AVR Seed NA
66 Invert K1 K2 status NA
74 Frequency Track Window NA
78 No Buzzer Dialog NA
130 Load Cell Offset 0
131 Load Cell Startup Low Limit 550
132 Output PN Voltage Limit 510
133 Stepped Phase Match Cleared

Corrective Action: The firmware update is mandatory at commissioning or for machines in operation, at the
next service call. When performing the update it is necessary to place the system into bypass, perform the
update, adjust the Frequency Slew Rate (see Frequency Slew Rate Adjustment), and place the system back
on line. This update can be accomplished with no parts.

Software Files Required:
UPSView24.exe (If this is a New Installation – The Dealer Must purchase this software.)
UPSView24Update.exe (Upgrade for existing software – 222-3478.exe)

Files 222-3478.exe, 2065418.exe, 2065410.exe and 2298308.exe are self-extracting .zip files that contain the
needed files to update the UPS firmware to version 2.45. Files 222-3478.exe, 2065418.exe, 2065410.exe and
2298308.exe are located on the flash file directory of SIS Web.

In order to complete the Firmware Update you will be required to obtain a Temporary High Level “Password”
from the Active Power Customer Service Center. You will need to state the unit’s Serial Number and the
technician’s name that will perform the update, at the time you place the call. The following contact
information is provided:
Active Power Customer Service
Phone: (512) 744-9286 (8:00am to 4:00pm Central)
Phone: (800) 288-5081 (24 hour Hot-Line)

Caterpillar Customer Support
Phone: (770) 233-3911

After completing the Software download from SIS, “run” the .exe file or UnZip the file to a directory in your
Laptop. Then confirm the content of the directory it should contain the following data files:

APSBoot3_ 12. mot
apc_ 110. ttf
APSLI_ COMPRESS_ 2_ 45. mot
APSLI_ internal_ 1_ 17. mot
pcc_ 110. ttf
zzc_ 102. ttf
gsc1_ 0. ttf

Upon confirmation of the directory contents you may proceed with to the Firmware Update Procedure.

Firmware Update Procedure:

1. Install UPS VIEW 2.4 on your laptop computer. This must be installed before you continue with this
procedure.
2. Place the UPS key switch in the bypass position. If this is a MMS place the System key switch in the bypass
position.
3. On a SMS if possible isolate (maintenance wraparound bypass) and power down the system.
4. Connect the laptop to the RS232 connector on the System I/ O board on a SMS and apply power. In a MMS
connect the laptop to the PCI and select the appropriate MMU via the rotary selector switch.
5. Start UPS View.
6. Select “Enter Password”.
7. Type in the user name and password.
8. Click “OK”
9. Perform an Alt< Z> and write down the parameters that are not default.
10. From the “File” menu select “Update Firmware”.
11. If this is a single module system (SMS) it is not equipped with a PCC and therefore no update is
required for the PCC.
12. Proceed by selecting “Serial Flash ZZC FPGA ” for the target. (4- wire systems only)
13. Click Browse, find and select/ click the file zzc_ 102. ttf. This file is either on a floppy disk or on your hard
drive where it was saved.
14. Click “Open”
15. Click “Program”
16. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Code update: receiving data” will appear in UPS View. After the progress bar
reaches 100% the next message in UPS View will be “Code update: updating flash.” When the progress bar
has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it. When the
progress bar has reached 100% then read back checking has finished. The progress bar will reset to 0 and
display the message “completed with no errors” on the left of it. UPS View will display the message “Code
update: successful.” If an error has occurred then press Program to retry the process.
17. Next, proceed by selecting “Serial Flash PCC FPGA” for the target.
18. Click Browse, find and select/ click the file pcc_ 109. ttf. This file is either on a floppy disk or on your hard
drive where it was saved.
19. Click “Open”
20. Click “Program”
21. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Code update: receiving data” will appear in UPS View. After the progress bar
reaches 100% the next message in UPS View will be “Code update: updating flash.” When the progress bar
has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it. When the
progress bar has reached 100% then read back checking has finished. The progress bar will reset to 0 and
display the message “completed with no errors” on the left of it. UPS View will display the message “Code
update: successful.” If an error has occurred then press Program to retry the process.
22. Press “Reload Device” to reset the PCC without cycling power.
23. Next, proceed by selecting “Serial Flash GSC FPGA ” for the target.
24. Click Browse, find and select/ click the file gsc1_ 0. ttf. This file is either on a floppy disk or on your hard
drive where it was saved.
25. Click “Open”
26. Click “Program”
27. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Code update: receiving data” will appear in UPS View. After the progress bar
reaches 100% the next message in UPS View will be “Code update: updating flash.” When the progress bar
has reset to 0% it will begin
again with the message “Read Back Flash Program” to the left of it. When the progress bar has reached 100%
then read back checking has finished. The progress bar will reset to 0 and display the message “completed
with no errors” on the left of it. UPS View will display the message “Code update: successful.” If an error has
occurred then press Program to retry the process.
28. Next, proceed by selecting “Byte- wide Flash PowerPC” as the target.
29. Click Browse, find and select/ click the file APSBoot3_ 12. mot. This file is either on a floppy disk or on
your hard drive where it was saved.
30. Click “Open”
31. Click “Program”
32. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Code update: receiving data” will appear in UPS View. After the progress bar
reaches 100% the next message in UPS View will be “Code update: updating flash.” When the progress bar
has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it. When the
progress bar has reached 100% then read back checking has finished. The progress bar will reset to 0 and
display the message “completed with no errors” on the left of it. UPS View will display the message “Code
update: successful.” If an error has occurred then press Program to retry the process.
33. Reset the processor. Press Ctrl< R> and “Y” to confirm.
34. There will only be a few seconds to perform this step. During the boot process wait for the message
“Pausing for operator input” to appear then, perform a Ctrl< I>.
35. This will stop the booting process. If the processor continues to boot then wait until it finishes and reboot
the processor again. Then pause the process by performing a (Ctrl< I>).
36. Next, proceed by selecting “Serial FPGA 20k” for the target.
37. Click Browse, find and select/ click the file apc_ 110. ttf. This file is either on a floppy disk or on your hard
drive where it was saved.
38. Click “Open”
39. Click “Program”
40. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Firmware update: receiving data” will appear in UPS View. After the progress
bar reaches 100% the next message in UPS View will be “Firmware update: updating flash.” When the
progress bar has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it.
When the progress bar has reached 100% then read back checking has finished. The progress bar will reset
to 0 and display the message “completed with no errors” on the left of it. UPS View will display the message
“Firmware update: successful.” If an error has occurred then press Program to retry the process.
41. Next, proceed by selecting “Compressed PowerPC Application” as the target.
42. Click Browse, find and select/ click the file APSLI_ COMPRESS_ 2_ 44. mot. This file is either on a floppy
disk or on your hard drive where it was saved.
43. Click “Open”
44. Click “Program”
45. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Firmware update: receiving data” will appear in UPS View. After the progress
bar reaches 100% the next message in UPS View will be “Firmware update: updating flash.” When the
progress bar has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it.
When the progress bar has reached 100% then read back checking has finished. The progress bar will reset
to 0 and display the message “completed with no errors” on the left of it. UPS View will display the message
“Firmware update: successful.” If an error has occurred then press Program to retry the process.
46. Next, proceed by selecting “Internal MPC555 Flash” as the target
47. Click Browse, find and select/ click the file APSLI_ internal_ 1_ 17. mot. This file is either on a floppy disk
or on your hard drive where it was saved.
48. Click “Open”
49. Click “Program”
50. The message “Programming the Flash” will appear on the left of the progress bar. The bar will move from
left to right and display a number in % that will increase form 0% to 100% as the bar moves right.
Simultaneously the message “Code update: receiving data” will appear in UPS View. After the progress bar
reaches 100% the next message in UPS View will be “Code update: updating flash.” When the progress bar
has reset to 0% it will begin again with the message “Read Back Flash Program” to the left of it. When the
progress bar has reached 100% then read back checking has finished. The progress bar will reset to 0 and
display the message “completed with no errors” on the left of it. UPS View will display the message “Code
update: successful.” If an error has occurred then press Program to retry the process.
51. Reset the processor. Press Ctrl< R> and “Y” to confirm.
52. Press “EXIT”
53. Monitor UPS View during the boot process and correct any “bad values” that occur during boot.
54. Press CNTL< N>. This will display your current firmware versions.
55. Press ALT< Z> and compare the list that was made at the beginning of this procedure to the list displayed
in UPS view and correct all discrepancies.

Current Revisions:
PPC: 2.44
IFLASH: 1.17
APC FPGA: 1.10
DSP: 20
PCC: 1.09
ZZC: 1.02 (4- wire systems only)
GSC FPGA: 1.00 (GSC equipped systems only)

56. The firmware is now updated for the SMS or a Single MMU. Stop here and reset the program parameters.
57. For a multiple module system disconnect UPS View and select the next MMU via the selector switch in the
System cabinet. Reconnect UPS View and repeat the procedure with the next MMU. It is not necessary to
update the PCC or ZZC again.

Frequency Slew Rate Adjustment:
In 2.45 firmware the algorithm for Frequency Slew Rate has changed. In pre- 2.45 firmware the value
that was entered was doubled (i. e. 0.3 = 0.6). When updating firmware to 2.45, the frequency Slew Rate
should be checked and changed to obtain similar operational characteristics prior to the update. If it is less
than 1Hz/ s then the parameter should be doubled at a minimum. If it equals 1Hz/ s then the parameter could
be left unchanged or increased.
During a discharge and when the UPS does not have a valid input or bypass source, its output
frequency is maintained by the controller but is not synchronized to any source. Once the UPS has a valid
input source, (generator or utility) it will make its output voltage match the source’s frequency and phase
angle. A phase match must be achieved before the UPS can begin to transfer the load from the flywheel to the
source.
Prior to the firmware version 2.45, the phase match algorithm would ‘step’ to the slew rate and
maintain this rate until a phase match was achieved. While this method is functional for most applications,
induction motors and DC drives require that this step be reduced to a very small number. In version 2.45, a
ramped version of the phase match has been implemented. While the ramped phase match will provide
smaller phase shifts per cycle, it will take longer to obtain a phase match for a given Frequency Slew Rate
setting.

The firmware has provisions to perform either method of phase match. The default settings will be:
Frequency Slew Rate: 1.0 Hz/ Sec.
Stepped Phase Match: 0 {ramped}

To change to the stepped method change the ‘Stepped Phase Match’ parameter to 1.

The following table displays the average time, in seconds, between the 2 methods for a 180° phase
match.

Freq. Slew Rate Ramped Stepped
(hz/second) (secs) (secs)
0.3 3.50 1.95
0.5 2.40 1.35
1.0(default) 1.90 0.90
1.5 1.66 0.80
2.0 1.46 0.75

The following parameters were added in this version of firmware.

Operating Parameter Status New Operating Parameter

Disable Autostart Combined/Renamed Auto Load and Start
Disable Auto Load on Combined/Renamed Auto Load and Start
Discharge VAC Offset Removed n/a
Cast Iron Housings Removed n/a
Start Volts: Warn Level Removed n/a
AVR Seed Removed n/a
Invert K1, K2 Status Removed n/a
Frequency Track Window Removed n/a
No Buzzer Dialog Removed n/a

When updating form 2.44 to 2.45 these parameters must be re-sent via UPS View after the firmware
has been updated. If updating from firmware older than 2.44 to 2.45 it will be necessary to re- send
additional parameters that appear in the boot process.

Operating Parameter Definition Default Value

Auto Load and Start 0=no autoload and no autostart 1*
1=autoload and no autostart
2=autoload and auto start

Load Cell Offset Sets load cell zero pound offset 0
(mV) if known

Load Cell Startup Sets minimum load cell measured 550
Low Limit weight that must exist for flywheel
to be motored or discharged

Output PN Voltage Sets the output voltage phase to 510
Limit neutral limit that is used to detect
a non-firing neutral static switch

Stepped Phase Match 0=ramped, 1= stepped 0

*If Disable Autostart was set to 1 prior to the firmware update it will be necessary to set Auto Load to
2 afterthe firmware update.

UPGRADE TIME ESTIMATE

The following outlines the estimated labor hours to complete upgrade:

Model Serial Number Time (Hours)
UPS 250I APZ 1.0
UPS 250IE CNM 1.0
UPS 300 CNJ 1.0
UPS 300E CPZ 1.0
UPS 500 CSE 2.0
UPS 600 CRY 3.0
UPS 750 CPM 3.0
UPS 900 CTX 4.0
Expandable CSY 1.0 (This unit is part of the UPS 250IE and
UPS 300E Line-Up Configuration)
UPS 500 N+1 3.0
UPS 600 N+1 4.0
UPS 750 N+1 4.0
UPS 900 N+1 5.0

Caterpillar Flash Files List & Cross

Leave a Reply Cancel reply

Privacy Policy Settings